World Tech Toys ZX-33220

World Tech Toys Eclipse 2.4Ghz 4.5CH DIY RC Racing Drone Instruction Manual

Model: ZX-33220

1. Introducció

Gràcies per la compraasing the World Tech Toys Eclipse 2.4Ghz 4.5CH DIY RC Racing Drone. This manual provides essential information for assembling, operating, and maintaining your drone. Please read it thoroughly before use to ensure safe and optimal performance.

World Tech Toys Eclipse DIY RC Racing Drone with Transmitter

Image 1.1: The Eclipse DIY RC Racing Drone and its 2.4Ghz transmitter. The drone features a sleek design with a yellow canopy, and the transmitter has dual joysticks and control buttons.

2. Informació de seguretat

Operating an RC drone requires caution. Failure to follow these safety guidelines may result in injury or damage to the product or property.

  • Edat recomanada: This product is recommended for users aged 14 and above. Adult supervision is advised for younger users.
  • Entorn de vol: Fly in open, clear areas away from people, animals, buildings, and power lines. Avoid flying in strong winds or adverse weather conditions.
  • Seguretat de l'hèlix: Keep hands, face, and loose clothing away from rotating propellers. Propellers can cause serious injury.
  • Seguretat de la bateria: Use only the specified battery and charger. Do not overcharge or short-circuit batteries. Dispose of batteries properly.
  • Línia de visió visual: Mantingueu sempre la línia de visió amb el vostre dron durant el vol.
  • Comprovació prèvia al vol: Before each flight, ensure all parts are securely attached, batteries are charged, and the drone is functioning correctly.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al vostre paquet:

  • Eclipse DIY RC Racing Drone (unassembled)
  • 2.4Ghz Transmitter
  • Motors (pre-installed or separate, depending on kit variation)
  • Hèlixs
  • Rotor Guards (removable)
  • Cable de càrrega USB
  • Manual d'instruccions

4. Instruccions de muntatge

The Eclipse DIY RC Racing Drone requires assembly. Follow these steps carefully.

Explotat view of Eclipse DIY RC Racing Drone components

Imatge 4.1: Desplegada view showing the main frame, motors, propellers, drone body, and canopy, illustrating how the Eclipse drone components fit together for assembly.

  1. Muntatge del marc: Connect the main frame components if they are not already pre-assembled. Ensure all connections are secure.
  2. Instal·lació del motor: If motors are separate, carefully insert them into the designated slots on the drone arms. Ensure wires are routed correctly and do not interfere with moving parts.
  3. Propeller Attachment: Attach the propellers to the motor shafts. Note that propellers are typically marked (e.g., A or B) and must be installed on the correct motor to ensure proper flight direction. Press them firmly onto the shafts.
  4. Rotor Guard Installation: For added protection, attach the removable rotor guards to the drone arms. Align the guards with the mounting points and secure them.
  5. Drone Body/Canopy: Place the main drone body or canopy over the internal components, ensuring it snaps into place or is secured with screws if provided.
Close-up of drone propeller and motor assembly

Imatge 4.2: Un primer pla view of a drone arm showing a propeller securely attached to the motor shaft, highlighting the detail of the propeller design.

5. Instal·lació i càrrega de la bateria

5.1 Bateria del drone

The Eclipse drone uses a 350 Milliamp Hours Lithium Ion battery. Always handle Li-Ion batteries with care.

  1. Càrrega: Connect the drone battery to the provided USB charging cable. Plug the USB cable into a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging indicator will show the charging status (refer to charger for specific light patterns). Do not leave batteries charging unattended.
  2. Instal·lació: Once fully charged, disconnect the battery from the charger. Open the battery compartment on the drone (usually on the underside). Insert the battery, ensuring the polarity is correct, and connect it to the drone's power connector. Securely close the battery compartment.

5.2 Transmitter Batteries

The 2.4Ghz transmitter requires 4 'AA' batteries (not included).

  1. Obriu el compartiment de la bateria a la part posterior del transmissor.
  2. Insert 4 'AA' batteries, matching the positive (+) and negative (-) terminals as indicated inside the compartment.
  3. Tanqueu el compartiment de la bateria de manera segura.

6. Instruccions de funcionament

6.1 Pairing the Drone and Transmitter

  1. Ensure both the drone and transmitter batteries are fully charged.
  2. Turn on the transmitter first. The indicator light will typically flash.
  3. Connect the drone's battery to power it on. Place the drone on a flat, level surface. The drone's lights will flash.
  4. On the transmitter, push the left joystick (throttle) all the way up, then all the way down. The lights on both the drone and transmitter should become solid, indicating successful pairing.

6.2 Controls bàsics de vol

The Eclipse drone features 4.5 channels, providing precise control.

  • Joystick esquerre (accelerador/guinyada):
    • Push up/down: Increases/decreases throttle (ascend/descend).
    • Push left/right: Yaw (rotates the drone left/right on its vertical axis).
  • Joystick dret (Pitch/Roll):
    • Push up/down: Pitch (moves the drone forward/backward).
    • Push left/right: Roll (moves the drone left/right sideways).
  • Botons de retallar: Use the trim buttons (usually located near the joysticks) to fine-tune the drone's stability if it drifts in any direction during hover.

6.3 Característiques especials

  • Flip Stunt Modes: The drone is capable of performing aerial flips. Consult the transmitter diagram for the specific button or joystick combination to activate this feature. Typically, you press a stunt button and then push the right joystick in the desired flip direction.
  • Laser Battle Mode: This drone features a laser battle mode. Refer to the transmitter controls for activating and engaging in laser battles with other compatible Eclipse drones.

7. Manteniment

Regular maintenance ensures the longevity and performance of your Eclipse drone.

  • Neteja: Use a soft, dry cloth to clean the drone. Avoid water or harsh chemicals.
  • Inspecció de l'hèlix: Regularly check propellers for damage (cracks, bends). Replace any damaged propellers immediately to ensure stable flight.
  • Cura del motor: Keep motors free from dust and debris. Avoid forcing the propellers if they are obstructed.
  • Emmagatzematge: When not in use, store the drone and transmitter in a cool, dry place, away from direct sunlight. Remove batteries from the transmitter if storing for extended periods.
Part inferior view of the Eclipse DIY RC Racing Drone

Imatge 7.1: Una part inferior view of the Eclipse DIY RC Racing Drone, showing the landing gear, battery compartment access, and the arrangement of the four propellers.

8. Solució De Problemes

If you encounter issues with your drone, refer to the following common problems and solutions:

ProblemaCausa possibleSolució
El dron no s'encén.Drone battery not charged or connected.Charge drone battery fully and ensure it is securely connected.
El transmissor no s'encén.Transmitter batteries are dead or incorrectly installed.Replace 'AA' batteries in the transmitter, ensuring correct polarity.
Drone and transmitter do not pair.Incorrect pairing sequence or interference.Ensure transmitter is turned on first, then drone. Perform the throttle up/down sequence. Move away from other 2.4Ghz devices.
El dron es desplaça durant el vol.Needs calibration or trim adjustment.Perform a flight calibration (refer to transmitter instructions) and use trim buttons to correct drift.
Temps de vol curt.Bateria no completament carregada o bateria envellida.Ensure battery is fully charged before each flight. Consider replacing the battery if it's old.
Drone is unstable or crashes easily.Damaged propellers or motors.Inspect propellers for damage and replace if necessary. Check motors for obstructions.

9. Especificacions

  • Marca: World Tech Toys
  • Nom del model: Eclipsi
  • Número de model: ZX-33220
  • Tipus de control: 2.4Ghz, 4.5 Channel RC
  • Drone Bateria: 350 milionsamp Hours Lithium Ion (Rechargeable)
  • Bateries del transmissor: 4 x 'AA' (not included)
  • Components inclosos: Transmitter, Drone, Motors
  • Dimensions de l'article (L x A x A): 4.75" x 4.75" x 2"
  • Franja d'edat: Adult (14+)
  • Característiques: Assembly Required, Removable Rotor Guards, 4.5 Channel Built-in Gyro, Laser Battle Mode, Flip Stunt Modes

10. Garantia i Suport

10.1 Informació de la garantia

This World Tech Toys Eclipse DIY RC Racing Drone comes with a 30 Day Warranty Against Manufacturer Defects des de la data de compra. Aquesta garantia cobreix els defectes de materials i fabricació en condicions d'ús normal. No cobreix els danys causats per un mal ús, accidents, modificacions no autoritzades o desgast normal.

10.2 Atenció al client

For technical assistance, warranty claims, or replacement parts, please contact World Tech Toys customer service. Refer to the product packaging or the official World Tech Toys weblloc web per obtenir la informació de contacte més actualitzada.

© 2023 World Tech Toys. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.