Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your CORE 10 Person Instant Cabin Tent with Screen Room. Please read all instructions carefully before use to ensure proper assembly and safe operation.
Informació important de seguretat
ADVERTÈNCIA: CONSERVEU TOTES LES FONTS DE FLAMA I CALOR D’AQUEST TEIXIT DE TENDA.
This tent is made of flame-resistant fabric which meets CPAI-84 specifications. IT IS NOT FIRE-PROOF. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the product fabric may render the flame-resistant properties ineffective.
WARNING: This product can expose you to chemicals including TDCPP, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Llista de components
Ensure all components are present before beginning setup:
- Tent with pre-attached poles
- Mosca de pluja
- Steel Stakes
- Bossa de transport
- Separador d'habitacions
- Screen Room Poles (separate)
- Guylines
Instruccions de configuració
Follow these steps for quick and efficient tent setup. It is recommended to have two people for assembly.
Step 1: Unpack and Lay Out
Remove the tent and all components from the carry bag. Lay the tent flat on the ground, ensuring the pre-attached poles are spread out.
Image: The tent is laid flat on the ground, showing the pre-assembled frame and mesh ceiling, ready for the next setup steps.
Step 2: Extend Leg Poles
Starting at one end, lift upwards on the V-shaped ridge poles until the elbow joints flex into a standing position. While one person stabilizes this end, work your way around the tent, flexing all elbow joints until all six leg poles are fully standing. Extend the telescoping poles until you hear the locking buttons engage.
Video: This video demonstrates the process of extending the tent poles and locking them into place for the main tent structure.
Video: A detailed guide on how to set up the CORE 10 Person Instant Cabin Tent, including pole extension and securing the frame.
Step 3: Assemble Screen Room
Unzip the screen room fabric and reach inside to extend the final pole. Insert the steel poles into the pin-and-loop at the base of the tent. Connect the top end of the steel poles into the plastic elbow joints. Assemble the curved awning pole and slide it through the top sleeve of the screen room. Place the ends of the curved pole into the other side of the elbow joints.
Imatge: Un interior view of the tent, highlighting the screen room area and the internal pole structure.
Pas 4: Assegurar la tenda
Stake out the screen house using the grommets at the base. For rain protection, drape the water-resistant rainfly over your tent and clip it to the leg poles. Guy out the tent and tighten the slack adjusters for added stability.
Image: The CORE 10 Person Instant Cabin Tent fully set up with its screen room, ready for use in a campmedi ambient.
Funcions operatives
Separador d'habitacions
The tent includes a room divider to create two separate spaces for added privacy. Simply toggle the divider into place using the provided attachments inside the tent.
Image: A family inside the tent, demonstrating the spaciousness and the use of the room divider to create distinct areas.
Ventilació
Lower vents bring in cool air from the ground, while the mesh ceiling allows hot air to escape, ensuring optimal airflow. Fully zipped windows provide additional ventilation or can be closed during rain.
Imatge: A view looking up at the tent's ceiling and upper windows, illustrating the mesh design for ventilation and natural light.
Organització Interior
The tent features storage pockets to keep small items and accessories within reach and off the floor, helping to maintain an organized interior.