Atlantic Spring Arm TV Mount User Manual

Instruccions importants de seguretat

Please read this manual thoroughly before installation and use. Improper installation or use may cause serious injury or damage. Keep this manual for future reference.

• Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat del suport i del televisor.
• No supereu la capacitat màxima de pes de 66 lliures (30 kg).
• Aquest suport està dissenyat per a televisors d'entre 23 i 65 polzades.
• Always use appropriate safety equipment during installation.
• No estrenyeu massa els cargols, ja que això pot causar danys.
• Mantingueu les peces petites allunyades dels nens.
• If you have any doubts about installation, consult a qualified professional.

Producte acabatview

The Atlantic Spring Arm TV Mount provides a full-motion solution for mounting your television, allowing for effortless adjustment in multiple directions. Its robust design ensures your TV is held securely while offering optimal viewangles d'ajust.

Especificacions tècniques

Guia d'instal·lació

Follow these steps carefully to ensure proper and secure installation of your TV mount. Professional installation is recommended for optimal safety and performance.

Pas 1: Preparació de la paret

Locate a suitable wall stud for mounting. Use a stud finder to ensure the stud is solid and can support the weight. Mark the drilling locations accurately.

Step 2: Attaching Wall Plate

Drill pilot holes at the marked locations. Secure the wall plate of the mount to the wall using the provided lag bolts. Ensure it is level and tightly fastened.

Step 3: Attaching VESA Plate to TV

Attach the VESA mounting plate to the back of your TV using the appropriate screws. Ensure the screws are compatible with your TV's VESA pattern and are securely tightened.

Step 4: Mounting TV to Arm

Carefully lift the TV with the attached VESA plate and hook it onto the mount's arm. Secure the TV to the arm using the locking mechanisms or screws as per the detailed instructions in the full PDF manual.

Pas 5: Gestió de cables

Utilize the integrated cable management system to route and conceal your TV cables. This helps maintain a clean and organized appearance.

Operating Your TV Mount

The Atlantic Spring Arm TV Mount offers versatile positioning for optimal viewing. Once installed, you can easily adjust your TV's position.

• Extensió/Retracció: Gently pull or push the TV to extend or retract the arm from the wall.



• Girar: Rotate the TV horizontally to achieve a 360-degree swivel for viewing from different angles in the room.



• Inclinació: Adjust the vertical angle of the TV to reduce glare or optimize viewalçada.

Manteniment

To ensure the longevity and smooth operation of your Atlantic Spring Arm TV Mount, perform the following maintenance:

• Neteja: Netegeu el suport amb un drap suau i sec per eliminar la pols. Per a marques difícils, utilitzeu un drap lleugerament sec.amp drap i detergent suau i, a continuació, assequeu-ho bé. Eviteu productes de neteja abrasius.
• Comprovacions periòdiques: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
• Lubricació: The spring arm mechanism is designed for maintenance-free operation. Do not attempt to lubricate internal components.

Resolució de problemes

If you encounter issues with your TV mount, refer to the common problems and solutions below. For detailed visual guidance on balance adjustment, please watch the official video provided.

Arm Balance Adjustment

The spring arm tension needs to be adjusted to match the weight of your TV for effortless movement. This adjustment is crucial for the mount to hold its position correctly.

• Problem: TV remains in an UP position (TV is too light for current arm settings).
  Solució: Push the TV down to a lower position. Locate the balance adjustment screw (often near a yellow dot/sticker on the arm). Use the hex key to turn the screw SENSE RELLOTGE. Test the arm balance after each turn until the TV holds its position easily.
• Problem: TV droops DOWN after attaching (TV is too heavy for current arm settings).
  Solució: You will likely need an extra set of hands for this. Gently lift the TV to an elevated position. Use the hex key to turn the balance adjustment screw EN SENTIT ANTIHORARI. Test the arm balance after each turn until the TV holds its position easily.

For a visual demonstration of the balance adjustment process, please refer to the official video below:

Garantia i assistència al client

Atlantic products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the full user manual PDF available for download.

For further assistance, technical support, or warranty claims, please visit the official Atlantic website or contact their customer service department. You can also refer to the comprehensive User Manual (PDF) for more detailed information:

Descarrega el manual d'usuari complet (PDF)