1. Introducció
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Característiques del producte
- Compatibilitat universal: Controls a wide range of devices.
- Funció d'autoaprenentatge: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Botons grans: Designed with oversized, clearly marked buttons for enhanced usability.
- Disseny intuïtiu: Simple layout for straightforward operation.
- Programació ràpida: Learning process typically takes less than one minute per button.
3. Configuració
3.1. Instal·lació de la bateria
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Localitzeu la tapa del compartiment de la bateria a la part posterior del comandament a distància.
- Feu lliscar la coberta cap avall o premeu el pestell i aixequeu-la per obrir-la.
- Introduïu dues piles AAA, assegurant-vos que els terminals positiu (+) i negatiu (-) s'alineïn correctament amb les marques de l'interior del compartiment.
- Torneu a col·locar la tapa del compartiment de la bateria, fent-la lliscar fins que faci clic de manera segura.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Entra al mode d'aprenentatge: Manteniu premut el botó PODER button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- Senyal de transmissió: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Repetiu per a altres botons: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Sortir del mode d'aprenentatge: Once all desired buttons are programmed, press the PODER button on the Simply remote again to exit learning mode. The indicator light will turn off.
Nota: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Imatge: Frontal view of the Simply SUPTLB001 remote control.
4. Instruccions de funcionament
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Selecció del dispositiu: Premeu el botó A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Encès/apagat: Premeu el botó PODER botó per encendre o apagar el dispositiu seleccionat.
- Control de volum: Utilitza el V+ botó per augmentar el volum i V- per reduir el volum.
- Program/Channel Control: Utilitza el P+ button to go to the next program/channel and P- to go to the previous program/channel.
- Entrada AV: Premeu el botó AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Manteniment
- Neteja: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Substitució de la bateria: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Emmagatzematge: Guardeu el comandament a distància en un lloc sec, allunyat de la llum solar directa i de temperatures extremes.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El comandament a distància no funciona. | Les piles estan gastades o incorrectament inserides. | Canvieu les piles per piles AAA noves, assegurant-vos de la polaritat correcta. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| L'abast remot és deficient. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. Especificacions
| Marca | Electrònica Superior |
| Nom del model | Simplement |
| Número de model | SUPTLB001 |
| Color | Negre |
| Tecnologia de connectivitat | Infrared (IR) Learning Function |
| Dispositius compatibles | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Nombre de botons | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Tipus de bateria | 2 x AAA (not rechargeable) |
| Interval màxim | 10 metres (aprox. 33 peus) |
| Dimensions (aprox.) | 16.5 cm (Llargada) x 4.5 cm (Amplada) |
Imatge: Lateral view of the remote control with approximate dimensions.
8. Garantia i Suport
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 anys des de la data de compra.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics weblloc web. Si us plau, conserveu el comprovant de compra per validar la garantia.