Vogel's THIN 546
Vogel's Thin 546 Full-Motion OLED TV Wall Mount Instruction Manual
Model: THIN 546
1. Introducció
The Vogel's Thin 546 is an ultra-thin full-motion TV wall mount specifically designed for OLED televisions, accommodating 40-65 inch TVs with a maximum weight capacity of 66 lbs (30 kg) and VESA compatibility up to 400x400 mm. Its design allows for an extremely flat mounting profile against the wall, enhancing the sleek aesthetic of OLED TVs.
This mount offers exceptional flexibility, allowing your TV to swivel up to 180 degrees, providing an optimal viewing experience from any position in the room. The smooth, fingertip-touch motion ensures easy adjustment, and its robust construction is TÜV certified for safety and durability.
Figure 1.1: The Vogel's Thin 546 Full-Motion OLED TV Wall Mount.
Figure 1.2: The Thin 546 mount seamlessly integrated into a living room setting.
2. Què hi ha a la caixa
Assegureu-vos que tots els components estiguin presents abans de començar la instal·lació:
- Pre-assembled TV Wall Mount
- Wall Mounting screws and plugs
- TV screen mounting screws, washers, and nuts
- Manual d'instal·lació
- Plantilla de perforació
- Nivell d'esperit
3. Guia d'instal·lació
For a smooth installation process, it is highly recommended to use the Vogel's TV Mount Guide app, available on both Android and iOS.
Figure 3.1: Use the Vogel's TV Mount Guide app for simplified installation.
3.1. Attaching the TV Strips
- Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta per evitar ratllades.
- Identifiqueu els forats de muntatge VESA a la part posterior del vostre televisor.
- Screw the provided TV strips (C) onto the TV using the appropriate screws, washers, and nuts from the kit. Ensure they are securely fastened. Refer to the included installation manual for specific screw sizes and configurations for your TV model.
Video 3.1: Detailed steps for attaching the TV strips to your television. This video demonstrates the initial setup process, including screw selection and proper tightening to ensure a secure fit.
3.2. Preparing the Wall Mount
- Remove the caps from the wall mount bars (D).
- Slide the bars (D) over the previously attached TV strips (C).
- Tighten the bolts on the bars to secure them to the strips.
- Replace the caps onto the bars (D).
3.3. Determining Wall Mount Position and Drilling
Careful planning of the wall mount (B) position is crucial. Note that the "Home" position (TV flat against the wall) should be on the opposite side of the TV connectors to allow for cable management.
- Use the provided drilling template and spirit level to mark the precise drilling locations on your wall.
- For brick or concrete walls, use a stud finder to avoid drilling into electrical wires or pipes. Drill holes of 10mm diameter and 80mm depth.
- For wooden studs, use a stud finder to locate the center of the stud. Drill holes of 5mm diameter and 80mm depth.
Video 3.2: This video demonstrates how to use the TV Mount Guide app to find the perfect mounting position and guides you through the drilling process for various wall types.
3.4. Mounting to the Wall
- Insert the wall plugs (P) into the drilled holes (for brick/concrete walls).
- Position the wall mount (B) against the wall, aligning the holes.
- Screw the wall mount (B) onto the wall using the provided screws (N) and washers (R). Tighten securely with a No. 13 wrench.
3.5. Final Assembly and Cable Management
- Remove the upper bolt and loosen the lower bolt on the wall mount.
- Place the wall mount cover (A) over the mechanism.
- Tighten both bolts to secure the cover.
- Loosen the upper thumbscrew on the TV strips and remove the lower thumbscrew.
- Carefully hook the TV onto the wall mount (B), ensuring the upper thumbscrew engages with the V-shaped recess.
- Position the TV level using the integrated leveling adjustment.
- Remove the cover at the bottom of the wall mount (B).
- Lead the cables into the conduit within the mount for a tidy appearance.
- Slide the cable clip (E) onto the lower bar (D). Lead the cables through the Velcro (X) and the clip (E).
- Replace the bottom cover, pushing until it clicks into position.
- Use the Allen key (T) to fine-tune the vertical level of the TV.
4. Instruccions de funcionament
The Vogel's Thin 546 mount is designed for smooth, effortless operation, allowing you to adjust your OLED TV with ease.
- Girar: Gently push or pull the TV to swivel it left or right. The mount allows for up to 180 degrees of swivel, depending on TV size and wall clearance.
- Estendre/Retreure: The full-motion arm extends up to 26 inches (66 cm) from the wall and retracts to a mere 1.8 inches (4.5 cm) when not in use, keeping your OLED TV as close to the wall as possible.
- Inclinació: Adjust the vertical tilt of your TV to reduce glare or achieve the perfect viewangle de ing.
- Nivell: If the TV appears unlevel, use the integrated leveling adjustment feature to correct it.
Video 4.1: This short product video demonstrates the smooth movement and flexibility of the THIN 546 OLED TV wall mount, showcasing its full-motion capabilities.
5. Manteniment
To ensure the longevity and optimal performance of your Vogel's Thin 546 TV wall mount, follow these simple maintenance guidelines:
- Neteja: Use a soft, dry cloth to wipe down the mount regularly. Avoid abrasive cleaners or solvents that could damage the finish.
- Lubricació: The mount features ultra-smooth high-quality bearings that typically do not require lubrication. If movement becomes stiff over time, consult the official Vogel's support for guidance.
- Comprovació de fixació: Periodically check all screws and bolts to ensure they remain tight. Do not overtighten.
- Gestió de cables: Ensure cables are not pinched or stressed by the moving parts of the mount. Re-route if necessary.
6. Solució De Problemes
If you encounter any issues with your Vogel's Thin 546 TV wall mount, refer to the following common troubleshooting tips:
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat. | Petit desajust durant la instal·lació. | Use the integrated leveling adjustment feature on the mount to correct the horizontal level. Refer to section 3.5. |
| Mount movement is stiff or difficult. | Dust accumulation or minor friction. | Clean the moving parts with a soft, dry cloth. Avoid applying lubricants unless specifically instructed by Vogel's support. |
| El televisor sembla fluix al suport. | Mounting screws or thumbscrews are not fully tightened. | Ensure all TV strip screws and the thumbscrews securing the TV to the wall mount are tightened. Do not overtighten. |
| Els cables són visibles o estan enredats. | Enrutament incorrecte del cablejat. | Utilize the integrated cable management system within the mount's arm and cover. Re-route cables through the conduit and clips as described in section 3.5. |
For further assistance, please refer to the official Vogel's support channels.
7. Especificacions
Detailed technical specifications for the Vogel's Thin 546 Full-Motion OLED TV Wall Mount:
| Característica | Detall |
|---|---|
| Dimensions del producte | 28.74 x 16.38 x 2.99 polzades |
| Pes de l'article | 0.212 unces |
| Número de model | PRI 546 |
| Tipus de muntatge | Muntatge de paret |
| Tipus de moviment | Giratòria |
| Mida màxima compatible | 65 polzades |
| Mida mínima compatible | 40 polzades |
| Màx. Capacitat de pes | 66 lliures (30 kg) |
| Compatibilitat VESA | 400x200 mm (extension strips included for 400x400 mm) |
| Distance from Wall (Retracted) | 1.8 polzades (45 mm) |
| Max. Extension from Wall | 26 polzades (660 mm) |
| Color | Negre |
| Certificacions | Certificat per TÜV |
Figure 7.1: Detailed dimensions and VESA mounting hole specifications for the Thin 546 mount.
8. Garantia i Suport
Vogel's stands by the quality of its products. The Thin 546 TV wall mount includes a garantia de per vida, reflecting Vogel's more than 45 years of experience in designing and manufacturing high-quality mounts for consumer electronics.
For detailed installation instructions, troubleshooting, and product information, please refer to the official installation manual:
Descarrega el manual d'instal·lació (PDF)
You can also visit the official Vogel's store for additional products and support:
Visit the Vogel's Store on Amazon
For direct support or inquiries, please contact Vogel's customer service through their official weblloc web o la informació de contacte que es proporciona a l'embalatge del producte.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.