Salicru SPS SOHO+ 1200VA SAI User Manual

1. Introducció

This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Salicru SPS SOHO+ 1200VA Uninterruptible Power Supply (UPS). The SPS SOHO+ series is designed to protect your electronic devices from power outages, surges, and fluctuations, ensuring continuous and stable power. Please read this manual thoroughly before using the device to ensure proper and safe operation.

2. Informació de seguretat

Always adhere to the following safety precautions to prevent injury or damage to the UPS and connected equipment.

• No obriu el SAI casing. No hi ha peces a l'interior que l'usuari pugui reparar. Demaneu totes les tasques de manteniment a personal de servei qualificat.
• Do not connect appliances that could overload the UPS, such as laser printers or vacuum cleaners, to the battery backup outlets.
• Assegureu-vos que el SAI estigui connectat a una presa de corrent amb connexió a terra.
• Do not expose the UPS to water or excessive humidity.
• Place the UPS in a well-ventilated area, away from direct sunlight or heat sources.
• Disconnect the UPS from the power outlet before cleaning or performing any maintenance.
• Battery replacement should only be performed by qualified personnel using the correct battery type (Pb-Ca).

3. Producte acabatview

The Salicru SPS SOHO+ 1200VA UPS is a line-interactive system featuring Automatic Voltage Regulation (AVR) and a clear LCD display for real-time status monitoring. It provides battery backup and surge protection for your critical devices.

3.1 Tauler frontal

Figura 1: Davant view of the Salicru SPS SOHO+ 1200VA UPS. It features a central LCD screen displaying battery, input, output, and load status. Below the screen is a circular power button, and further down are two USB 2.0 ports for charging devices.

• Pantalla LCD: Shows real-time information such as input/output voltage, battery level, and load capacity.
• Botó d'encesa: Serveix per encendre o apagar el SAI.
• USB Charging Ports (2A Max): Two USB 2.0 ports for charging mobile devices.

3.2 Panell posterior

Figura 2: posterior view of the Salicru SPS SOHO+ 1200VA UPS. It shows the integrated power cord, a circuit breaker button (10A 250V~), and four Schuko outlets labeled "BATTERY BACKUP & SURGE".

• Cable d'entrada de CA: Connecta el SAI a la font d'alimentació principal.
• Tallacircuits: Protecció contra sobrecàrrega rearmable.
• Schuko Outlets (x4): Provide battery backup and surge protection for connected devices.
• Port de comunicació USB: For connecting the UPS to a computer for monitoring and management (cable not shown in image).

4. Configuració

1. Desembalatge: Traieu amb cura el SAI del seu embalatge. Inspeccioneu-lo per detectar qualsevol dany durant l'enviament.
2. Col·locació: Place the UPS on a flat, stable surface in a cool, dry, and well-ventilated indoor area. Ensure there is adequate space around the unit for airflow. Avoid direct sunlight, heat sources, and excessive moisture.
3. Càrrega inicial: Connect the UPS to a grounded wall outlet using its integrated power cord. Allow the unit to charge for at least 4 hours before connecting any devices. This ensures the battery is fully charged and ready to provide optimal backup time.
4. Dispositius de connexió:
   • Plug your computer, monitor, and other critical electronic devices into the Schuko outlets on the rear panel. These outlets provide both battery backup and surge protection.
   • For devices that only require surge protection (e.g., printers, scanners), you may use a separate surge protector connected to a wall outlet, or if the UPS has dedicated surge-only outlets (this model has all battery backup).
5. Comunicació USB (opcional): Connect the UPS to your computer using a USB cable (not included) to enable monitoring and management software features. Refer to the software's instructions for installation and use.

5. Instruccions de funcionament

5.1 Turning On/Off the UPS

• Encendre: Press and hold the power button on the front panel for approximately 3 seconds until you hear a beep and the LCD display illuminates.
• Apagar: Press and hold the power button for approximately 3 seconds until the LCD display turns off and the unit powers down.

5.2 Comprensió de la pantalla LCD

Figura 3: Detallada view of the LCD display on the Salicru SPS SOHO+ UPS. The display shows icons for battery charge level, input voltage (IN), output voltage (OUT), and connected load level (LOAD).

The LCD display provides critical information about the UPS status:

• BATT: Indicates the current battery charge level.
• EN: Mostra el volum d'entradatage from the utility power.
• SORTIDA: Mostra el volum de sortidatage supplied by the UPS to connected devices.
• CÀRREGA: Mostra el percentatgetage of the UPS's capacity currently being used by connected devices.
• Indicadors: Icons may appear to indicate AC mode, battery mode, fault conditions, or overload.

5.3 Cold Start Function

The UPS supports a cold start function, allowing it to power on and provide power to connected devices even when there is no utility power available. To perform a cold start, ensure the UPS is off, then press and hold the power button for approximately 5-7 seconds until the unit powers on and supplies power from its battery.

5.4 Volum automàtictagReglament (AVR)

The SPS SOHO+ features AVR, which automatically corrects minor voltage fluctuations (sags and surges) without switching to battery power. This extends battery life and ensures a stable power supply to your devices.

6. Manteniment

• Neteja: Disconnect the UPS from the power outlet. Use a soft, dry cloth to clean the exterior. Do not use liquid or aerosol cleaners.
• Cura de la bateria:
  • To maintain optimal battery life, ensure the UPS is connected to a power outlet and charging when not in use.
  • Perform a full discharge and recharge cycle every 3-6 months if the UPS is rarely used or experiences frequent short power outages. This helps calibrate the battery meter and maintain battery health.
  • The battery is user-replaceable. When the battery needs replacement (typically after 3-5 years, depending on usage), contact Salicru support or a qualified technician for guidance on obtaining and installing a compatible Pb-Ca battery.
• Ventilació: Comproveu regularment que les obertures de ventilació estiguin netes de pols i deixalles per evitar el sobreescalfament.

7. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb el vostre SAI.

If the problem persists after attempting the suggested solutions, please contact Salicru customer support.

8. Especificacions

9. Garantia i Suport

Salicru products are manufactured to the highest quality standards. For information regarding your product's warranty, please refer to the warranty card included with your purchase or visit the official Salicru weblloc.

For technical support, troubleshooting assistance, or spare parts, please contact Salicru customer service. You can find contact information on the official Salicru weblloc: www.salicru.com.

Note: No official product videos were available in the provided product data.