Hotone Nano Legacy Floor Series Mojo Attack User Manual

1. Introducció

The Hotone Nano Legacy Floor Series Mojo Attack is a compact, dual-channel, 75-watt floor guitar amplifier designed for portability and versatile tone. It integrates the sound characteristics of two iconic amplifiers: the Hotone Mojo Diamond (inspired by the Fender Tweed) and the Hotone Heart Attack (inspired by the Mesa/Boogie Rectifier). This unit is ideal for musicians seeking powerful, high-quality guitar tones in a convenient, pedalboard-friendly format.

2. Característiques clau

• Portable 75-watt, dual-channel floor guitar ampmés viu.
• Channel A (CH A): Hotone Mojo Diamond, delivering tones inspired by the legendary Fender Tweed ampmés viu.
• Channel B (CH B): Hotone Heart Attack, providing tones inspired by the legendary Mesa/Boogie Rectifier ampmés viu.
• Independent Volume, Gain, and 3-band EQ (Bass, Middle, Treble) controls for each channel.
• Integrated Boost function for adding up to +12dB of clean volume.
• Built-in Reverb effect with natural decay.
• FX Loop for integrating external effects pedals.
• Single Speaker Output for use with 4, 8, or 16-ohm cabinets.
• Includes an 18–20 V DC power supply.

3. Controls i connexions

3.1 Controls del panell frontal

This image displays the top panel of the Mojo Attack, highlighting the control knobs for each channel and the footswitches.

• CH A / Mojo Diamond Controls:
• BAIX: Adjusts the low-frequency response for Channel A.
• MITJÀ: Adjusts the mid-frequency response for Channel A.
• AGUTS: Adjusts the high-frequency response for Channel A.
• GUANY: Controls the amount of overdrive/distortion for Channel A.
• VOL: Sets the output volume level for Channel A.
• CH B / Heart Attack Controls:
• BAIX: Adjusts the low-frequency response for Channel B.
• MITJÀ: Adjusts the mid-frequency response for Channel B.
• AGUTS: Adjusts the high-frequency response for Channel B.
• GUANY: Controls the amount of overdrive/distortion for Channel B.
• VOL: Sets the output volume level for Channel B.
• Mando REVERB: Adjusts the intensity of the built-in reverb effect.
• Interruptor de peu REVERB: Activates or deactivates the reverb effect.
• CH A/B Footswitch: Toggles between Channel A (Mojo Diamond) and Channel B (Heart Attack).
• Interruptor de peu BOOST: Engages or disengages the +12dB clean volume boost.

3.2 Connexions del panell posterior

This image shows the rear panel of the Mojo Attack, detailing all available input and output connections.

• BUCLE FX (ENVI/RETORN): 1/4-inch jacks for connecting external effects pedals. Connect the 'SEND' to the input of your effect and the output of your effect to the 'RETURN'.
• DC 18-20V: Presa d'entrada d'alimentació per connectar l'adaptador de corrent inclòs.
• ENCENDIDA / APAGADA: Interruptor d'alimentació principal de la unitat.
• SPEAKER OUTPUT (4-16 OHMS): 1/4-inch jack for connecting to a passive speaker cabinet. Ensure the cabinet's impedance matches the amplifier's output capabilities (4, 8, or 16 ohms).
• LINE OUTPUT (6.35mm Jack): 1/4-inch line out for connecting to mixers, audio interfaces, or other ampsistemes de lificació.
• SORTIDA XLR: Balanced XLR output for direct connection to a PA system or recording console.
• CAB SIM ON/OFF: Switch to enable or disable the cabinet simulation for the LINE and XLR outputs.

4. Configuració

1. Connexió d'alimentació: Connect the included 18-20V DC power adapter to the 'DC 18-20V' input on the rear panel. Plug the adapter into a suitable power outlet.
2. Connexió de guitarra: Connect your guitar to the input jack on the front of the unit (not explicitly shown in images but standard for guitar amps).
3. Speaker Cabinet Connection: Per a directes amplification, connect a speaker cable from the 'SPEAKER OUTPUT' (4-16 OHMS) on the rear panel to your passive guitar speaker cabinet. Ensure the cabinet's impedance is within the supported range (4, 8, or 16 ohms).
4. Direct Connection (Optional): For connecting to a mixer, audio interface, or PA system, use the 'LINE OUTPUT' (1/4-inch) or 'XLR OUTPUT' on the rear panel. You can engage or disengage the 'CAB SIM' switch based on your preference or the requirements of the connected device.
5. Effects Loop Connection (Optional): If using external effects, connect the 'SEND' jack to the input of your effect pedal and the output of your effect pedal to the 'RETURN' jack.

5. Instruccions de funcionament

1. Encès: Ensure all connections are secure, then flip the 'POWER ON/OFF' switch on the rear panel to the 'ON' position.
2. Selecció de canals: Use the 'CH A/B' footswitch to toggle between Channel A (Mojo Diamond) for classic Fender Tweed-inspired clean and mild overdrive tones, and Channel B (Heart Attack) for heavier Mesa/Boogie Rectifier-inspired high-gain sounds.
3. Formació del to: Adjust the 'BASS', 'MIDDLE', and 'TREBLE' knobs for each channel independently to sculpt your desired tone.
4. Guany i volum: Use the 'GAIN' knob to control the amount of drive/distortion and the 'VOL' knob to set the output level for each channel.
5. Funció d'impuls: Press the 'BOOST' footswitch to activate a +12dB clean volume boost, useful for solos or emphasizing certain passages.
6. Efecte de reverberació: Turn the 'REVERB' knob to adjust the intensity of the built-in reverb. Use the 'REVERB' footswitch to engage or disengage the effect.
7. Effects Loop Usage: If external effects are connected to the FX Loop, they will be active when the loop is engaged (always on, or controlled by external switch if applicable to your effects).

6. Manteniment

• Neteja: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, solvents, or waxes.
• Emmagatzematge: Emmagatzemar el ampGuardar en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Manipulació: Manipuleu la unitat amb cura. Eviteu deixar-la caure ni sotmetre-la a impactes forts.
• Ventilació: Ensure proper ventilation around the unit during operation to prevent overheating. Do not block any vents.
• Font d'alimentació: Always use the original or a compatible 18-20V DC power supply. Using an incorrect power supply can damage the unit and void the warranty.

7. Solució De Problemes

• Sense so:
  • Check if the power adapter is securely connected and the unit is powered on.
  • Ensure your guitar cable is properly connected to the input.
  • Verify that the speaker cable is securely connected to the 'SPEAKER OUTPUT' and the speaker cabinet.
  • Check the volume knobs on both channels and your guitar.
  • If using the FX Loop, ensure all pedals are powered and connected correctly. Try bypassing the FX Loop to isolate the issue.
• Soroll distorsionat/no desitjat:
  • Reduce the 'GAIN' knob settings on both channels.
  • Comproveu si hi ha cables o connexions defectuoses.
  • Ensure the power supply is stable and free from interference.
  • If using the 'XLR OUTPUT' or 'LINE OUTPUT', try toggling the 'CAB SIM' switch.
• Footswitches Not Responding:
  • Assegureu-vos que la unitat estigui encès.
  • If a footswitch feels stuck, gently try to free it. Avoid excessive force.

8. Especificacions

9. Garantia i Suport

For detailed warranty information and technical support, please refer to the official HOTONE website or contact your authorized HOTONE dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

HOTONE Official Weblloc: www.hotoneaudio.com