JMA 3016137

JMA M-BT Remote Control 3016137 Black

Manual d'usuari

Introducció

This manual provides detailed instructions for the proper use and maintenance of your JMA M-BT Remote Control, model 3016137. This device is designed for seamless control of compatible systems via Bluetooth connectivity. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

Producte acabatview

JMA M-BT Remote Control 3016137 Black with blue illuminated ring around buttons.

Figure 1: JMA M-BT Remote Control (Model 3016137)
This image displays the JMA M-BT Remote Control, model 3016137, in black. The device is rectangular with rounded corners. Its face features a central circular area with four numbered buttons (1, 2, 3, 4) arranged around a smaller central button. A bright blue LED ring illuminates the circular button area. The bottom right corner of the remote shows the 'JMA' logo. The surface has a subtle circuit-like pattern.

Configuració

1. Instal·lació de la bateria

The JMA M-BT Remote Control requires 1 'A' type battery (Lithium Ion recommended). To install the battery:

  1. Localitzeu la tapa del compartiment de la bateria a la part posterior del comandament a distància.
  2. Feu lliscar o desenganxeu suaument la tapa per obrir el compartiment.
  3. Insert the 'A' type battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Torneu a col·locar la tapa del compartiment de la bateria, assegurant-vos que encaixi correctament al seu lloc amb un clic.

Note: Dispose of used batteries responsibly according to local regulations.

2. Emparellament Bluetooth

To connect your JMA M-BT Remote Control to a compatible device (e.g., auto system):

  1. Ensure the remote control has a fresh battery installed.
  2. Put your compatible device into Bluetooth pairing mode. Refer to your device's manual for specific instructions.
  3. On the JMA M-BT Remote Control, press and hold the central button (or a designated pairing button, if available) until the blue LED ring begins to flash, indicating it is in pairing mode.
  4. On your compatible device, select "JMA M-BT Remote" (or similar name) from the list of available Bluetooth devices.
  5. Once paired, the blue LED ring on the remote control will stop flashing and remain solid for a few seconds, then turn off, indicating a successful connection.

If pairing fails, ensure both devices are within range and repeat the steps.

Instruccions de funcionament

The JMA M-BT Remote Control features four numbered buttons and a central button for various functions. The specific functions of these buttons depend on the device it is paired with.

  • Numbered Buttons (1, 2, 3, 4): These buttons typically correspond to programmable functions on your paired device. Consult your device's manual to assign or understand the functions of these buttons.
  • Botó central: This button often serves as a primary action button, such as 'Enter', 'Select', or 'Power' depending on the paired device. It may also be used for pairing mode activation.
  • Indicador LED: The blue LED ring indicates the remote's status (e.g., pairing mode, low battery, button press confirmation).

For detailed operation, refer to the user manual of the specific device you are controlling with this remote.

Manteniment

  • Neteja: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or strong chemicals, as these may damage the surface or internal components.
  • Emmagatzematge: Guardeu el comandament a distància en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
  • Substitució de la bateria: Replace the battery when the LED indicator shows signs of low power or the remote's responsiveness decreases.
  • Eviteu la humitat: Do not expose the remote control to water or excessive humidity.

Resolució de problemes

ProblemaCausa possibleSolució
El comandament a distància no respon.Bateria baixa o esgotada.Substituïu la bateria per una de nova.
Remote not pairing with device.Out of range; device not in pairing mode; interference.Ensure remote and device are close. Put device in pairing mode. Try pairing again. Move away from other electronic devices.
Buttons not performing expected functions.Incorrect pairing; functions not programmed.Re-pair the remote. Refer to your paired device's manual for button programming.

Especificacions

MarcaJMA
Nom del model3016137
Número de model de l'article3016137
Dimensions del producte150 x 5 x 5 cm
Pes de l'article26 grams
ColorNegre
Tecnologia de connectivitatBluetooth
Dispositius compatiblesAutomàtic
Nombre de botons4
Tipus de controladorControl de botons
Descripció de la bateriaLiti
Piles necessàriesNecessites piles de 1 A.

Garantia i Suport

For information regarding warranty coverage and technical support for your JMA M-BT Remote Control, please refer to the documentation provided with your purchase or contact the retailer or manufacturer directly. Specific warranty terms may vary by region and point of purchase.

Manufacturer: JMA

© 2023 JMA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.