Airam LED Cabinet Lamp Manual d'instruccions de 1.2W

1. Introducció

This manual provides essential instructions for the safe and efficient use of your Airam LED Cabinet Lamp 1.2W. This battery-operated lamp features a PIR motion sensor, automatically illuminating when motion is detected, making it ideal for cabinets, drawers, and other enclosed spaces. Please read this manual thoroughly before installation and operation.

2. Configuració

2.1 Contingut del paquet

Abans de continuar, assegureu-vos que hi hagi tots els components:

• Airam LED Cabinet Lamp 1.2W
• Mounting hardware (screws or adhesive strips, typically included in packaging)

Figure 1: Airam LED Cabinet Lamp in its retail packaging, showing the lamp and typical mounting accessories.

2.2 Instal·lació de la bateria

The Airam LED Cabinet Lamp requires 4 x AA 1.5V batteries (not included).

1. Locate the battery compartment cover on the back or side of the lamp.
2. Feu lliscar o desenganxeu la tapa per obrir el compartiment.
3. Insert 4 AA batteries, ensuring correct polarity (+ and - terminals match the markings inside the compartment).
4. Tanqueu bé la tapa del compartiment de la bateria.

2.3 Muntatge de la Lamp

El lamp can be mounted using screws or adhesive strips, depending on the included hardware and your preference. Choose a location where the motion sensor has a clear line of sight to the area where movement is expected (e.g., inside a cabinet door, above a drawer).

Figura 2: Frontal view of the Airam LED Cabinet Lamp, highlighting the central motion sensor.

Using Screws (if applicable):

1. Mark the desired mounting position.
2. Drill pilot holes if necessary, matching the lampels forats de muntatge.
3. Assegureu la lamp utilitzant els cargols proporcionats.

Using Adhesive Strips (if applicable):

1. Netegeu a fons la superfície de muntatge per assegurar-vos que estigui seca i lliure de pols o greix.
2. Peel the protective backing from the adhesive strips.
3. Premeu fermament la lamp onto the desired surface for at least 30 seconds.

3. Funcionament

The Airam LED Cabinet Lamp is designed for automatic operation using its integrated PIR (Passive Infrared) motion sensor.

1. Once batteries are installed and the lamp is mounted, it will enter standby mode.
2. When the PIR motion sensor detects movement within its range (e.g., opening a cabinet door or drawer), the LED lights will automatically turn on.
3. El lamp will remain illuminated for approximately 25 seconds after motion is detected.
4. If no further motion is detected within this period, the lamp will automatically turn off to conserve battery power.
5. If continuous motion is detected, the lamp will remain on until motion ceases for 25 seconds.

Nota: Ensure the motion sensor is not obstructed for optimal performance.

4. Manteniment

4.1 Substitució de la bateria

When the light output diminishes or the lamp stops functioning, it is time to replace the batteries. Refer to section 2.2 Instal·lació de la bateria per obtenir instruccions detallades.

• Substitueix sempre les 4 piles AA alhora.
• No barregeu piles velles i noves, o diferents tipus de piles.
• Eliminar les bateries usades de manera responsable d'acord amb la normativa local.

4.2 Neteja

El lamp is constructed from polycarbonate and ABS plastic. To clean the lamp:

• Netegeu la superfície amb un drap suau, sec o lleugerament sec.amp tela.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish or the sensor.
• Ensure no liquid enters the battery compartment or sensor area.

5. Solució De Problemes

6. Especificacions

7. Garantia i Suport

Specific warranty information may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for details regarding warranty coverage.

For technical support or further assistance, please contact the manufacturer, Bot Lighting, or your retailer. Keep your purchase receipt as proof of purchase.