Introducció
The TC Electronic FLUORESCENCE SHIMMER REVERB is a shimmering, super-bright reverb pedal designed to create ethereal reverb sounds. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal.
Figura 1: superior view of the FLUORESCENCE SHIMMER REVERB pedal.
- Shimmering Reverb: Creates bright, ethereal reverb effects.
- Intuitive 4-Knob Interface: Simple controls for easy sound shaping.
- True Bypass: Ensures ultimate signal integrity when the effect is disengaged.
- Construcció duradora: Features a robust metal chassis for roadworthy reliability.
Configuració
Follow these steps to connect your FLUORESCENCE SHIMMER REVERB pedal:
- Connexió d'alimentació: Connect a 9V DC, 100mA power adapter (center negative) to the power input jack on the pedal. This pedal operates on corded electric power.
- Connexió d'entrada: Connect your guitar or other instrument to the 1/4 inch (6.35mm) INPUT jack on the pedal using a standard instrument cable.
- Connexió de sortida: Connect the 1/4 inch (6.35mm) OUTPUT jack of the pedal to your amplifier or the next effect pedal in your signal chain.
- Col·locació: For optimal shimmer reverb effects, place the FLUORESCENCE SHIMMER REVERB pedal towards the end of your effects chain, typically after modulation and drive pedals, but before delay pedals.
Figura 2: posterior view mostrant les connexions d'entrada, sortida i alimentació.
Funcionament del pedal
The FLUORESCENCE SHIMMER REVERB pedal features a straightforward 4-knob interface for easy control over your sound:
Figure 3: Control knobs for the FLUORESCENCE SHIMMER REVERB pedal.
- Mando REVERB: Controls the overall decay time and size of the reverb effect. Turning it clockwise increases the length and spaciousness of the reverb.
- Botó MIX: Adjusts the balance between your dry (unaffected) signal and the wet (effected) signal. Turn clockwise for more reverb effect, counter-clockwise for less.
- Mando de TONE: Shapes the tonal character of the reverb. This control allows you to brighten or darken the shimmer effect, from warm and subtle to crisp and cutting.
- SHIMMER Knob: This dedicated control adds an octave-up effect to the reverb tail, creating the signature ethereal, shimmering sound. Increase for a more pronounced shimmer.
- Interruptor de peu: Engages or disengages the effect. The pedal features true bypass, ensuring your signal remains unaffected when the pedal is off.
Manteniment
To ensure the longevity and optimal performance of your FLUORESCENCE SHIMMER REVERB pedal, follow these maintenance guidelines:
- Neteja: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Emmagatzematge: Guardeu el pedal en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Connexions: Comproveu periòdicament totes les connexions dels cables per detectar desgast. Assegureu-vos que els endolls estiguin lliures de pols i deixalles.
- Font d'alimentació: Always use a regulated 9V DC, 100mA (center negative) power supply. Using an incorrect power supply can damage the unit and void the warranty.
- Cura física: The pedal features a durable metal chassis. However, avoid dropping the unit or subjecting it to excessive force to prevent internal damage.
Resolució de problemes
If you encounter issues with your FLUORESCENCE SHIMMER REVERB pedal, consult the following common solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so ni senyal feble | Incorrect cable connections, faulty cables, no power, pedal disengaged. | Verify all cables are securely connected. Test with different cables. Ensure power supply is connected and functional. Press the footswitch to engage the effect. |
| Sense efecte de reverberació | MIX knob set too low, REVERB knob set too low, pedal disengaged. | Increase the MIX and REVERB knob settings. Ensure the pedal is engaged. |
| Soroll o brunzit no desitjats | Faulty power supply, ground loop, interference from other pedals/equipment. | Use a high-quality, isolated power supply. Try connecting the pedal to a different power outlet. Ensure all cables are shielded and in good condition. |
| Shimmer effect is too subtle or too intense | SHIMMER knob setting. | Adjust the SHIMMER knob to achieve the desired intensity. Experiment with the TONE knob to fine-tune the character. |
Especificacions
- Model: FLUORESCENCE SHIMMER REVERB
- ASIN: B079Y519PH
- Pes de l'article: 1.1 lliures (0.5 quilograms)
- Dimensions del producte: 5.2 x 2.91 x 2.28 polzades
- Material del cos: Metall
- Color: Blau
- Tipus de connector: Presa d'àudio de 1/4 de polzada (6.35 mm)
- Interfície de maquinari: Àudio d'1/4 de polzada
- Font d'alimentació: Elèctric amb cable
- Voltage: 9V DC (100mA, center negative recommended)
- Data de primera disponibilitat: 27 de febrer de 2018
Garantia i Suport
TC Electronic products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official TC Electronic weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
Per obtenir més ajuda, visiteu el TC Electronic Store on Amazon.