1. Informació important de seguretat
Read this entire manual before installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance. Keep this manual for future reference.
- Do not exceed the weight capacity. Failure to do so may result in serious injury or property damage.
- Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware and components.
- Use mounting screws as provided and do not overtighten.
- Aquest producte conté articles petits que poden suposar un perill d'asfixia si s'empassa. Mantingueu aquests articles lluny dels nens.
2. Contingut del paquet
Verify that all components are present and undamaged. If any parts are missing or damaged, please contact WALI customer support.
- Single Fully Adjustable Arm x 1
- Placa VESA x 1
- Kit de maquinari de muntatge x 1
Figura 2.1: Tots els components inclosos al paquet.
3. Especificacions del producte
| Tipus de muntatge | Muntatge de taula |
| Tipus de moviment | Articulant |
| Material | Metall |
| Color | Negre |
| Dispositius compatibles | Monitor |
| Angle d'inclinació màxim | 90 graus |
| Maximum Supported Screen Size | 27 polzades |
| Minimum Supported Screen Size | 13 polzades |
| Maximum Support Weight | 22 lliures |
| Pes de l'article | 2.1 lliures |
4. Compatibilitat
This monitor arm is designed for use with WALI monitor mounting systems that feature a 1.375-inch (3.5 cm) diameter center pole. It supports a single monitor up to 27 inches in size and a maximum weight of 22 lbs. The arm is compatible with VESA mounting patterns of 75x75mm and 100x100mm.
Compatible WALI monitor mount product list (pole NOT included):
- M001, M002, M003, M004
- MF001, MF002, MF003
- M001XL, M002XL, M001LP, M00LP, MLP01
Figure 4.1: Display compatibility details.
Figure 4.2: Pole diameter compatibility (1.375 inches).
5. Instruccions d'instal·lació
Follow these steps to install your WALI Single Monitor Arm. Ensure you have all necessary tools and components before beginning.
5.1. Attach Arm to Pole
- Slide the arm collar onto the existing WALI monitor mount pole.
- Adjust the arm to your desired height and tighten the set screw to secure it in place.
5.2. Fixeu la placa VESA al monitor
- Alineeu la placa VESA amb els forats de muntatge de la part posterior del monitor.
- Secure the VESA plate to the monitor using the appropriate screws from the mounting hardware kit. Do not overtighten.
5.3. Muntar el monitor al braç
- Carefully slide the VESA plate (with the attached monitor) onto the arm's VESA head.
- Ensure the monitor is securely seated on the arm.
5.4. Gestió de cables
- Route monitor cables through the integrated cable clips on the arm for a tidy setup.
Figure 5.1: Monitor arm installed on a desk.
Guia de vídeo d'instal·lació
Video 5.1: Detailed installation and feature overview for the WALI Universal Single Monitor Arm (001ARM).
Video 5.2: Installation guide for the WALI Single Monitor Arm (001ARM) on a WALI Monitor Mount.
6. Funcionament i ajust
The WALI Single Monitor Arm offers dynamic adjustability to achieve an ergonomic and comfortable viewing position, reducing neck and eye strain.
- Extend and Retract: The high-grade arms can be extended or retracted to bring the monitor closer or push it further away.
- Inclinació: Adjust the monitor's vertical angle by tilting it up or down by +/- 90 degrees.
- Girar: Rotate the monitor 360 degrees to switch between landscape and portrait modes.
- Girar: Swivel the monitor left or right by +/- 90 degrees at various joints for optimal viewangles d'ajust.
Figure 6.1: Angle adjustment capabilities (Tilt, Rotate, Swivel).
7. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del braç del monitor.
- Neteja: Wipe the arm and VESA plate with a soft, damp tela. Eviteu els netejadors abrasius.
- Comproveu les connexions: Periodically check all screws and connections to ensure they are secure. Tighten if necessary.
- Lubricació: No lubrication is typically required for the joints. If movement becomes stiff, ensure no debris is obstructing the joints.
8. Solució De Problemes
If you encounter issues with your WALI Single Monitor Arm, refer to the following common problems and solutions:
- Monitor is not stable/sags:
Ensure all mounting screws are securely tightened. Verify that your monitor's weight and size are within the specified limits (max 22 lbs, up to 27 inches). - Arm is too stiff or too loose:
Check the tension adjustments on the arm joints. Some joints may have screws that can be tightened or loosened to adjust resistance. - Monitor does not fit the VESA plate:
Confirm your monitor has VESA 75x75mm or 100x100mm mounting holes. - Arm does not fit the pole:
Ensure your existing WALI monitor mount pole has a 1.375-inch (3.5 cm) diameter.
If the problem persists, please contact WALI customer support for further assistance.
9. Garantia i Suport
The WALI Single Monitor Arm (001ARM) comes with a 10 any de garantia.
For any questions, concerns, or support needs, please contact our experienced and friendly US-based customer support team. They are available to assist you 7 days a week.
Contact information can typically be found on the WALI official weblloc web o a través de la vostra plataforma de compra.
