Introducció
This manual provides essential information for the safe and efficient operation of your Amazon Basics 16-inch DC Motor Standing Floor Fan. Please read these instructions thoroughly before assembly, operation, or maintenance. Keep this manual for future reference.
The Amazon Basics 16-inch DC Motor Standing Floor Fan, featuring a white finish and a remote control for convenient operation. Blue lines illustrate the airflow.
Instruccions importants de seguretat
Per reduir el risc d'incendi, descàrrega elèctrica o lesions, observeu les precaucions de seguretat següents:
- Desendolleu sempre el ventilador de la presa de corrent abans de netejar-lo, fer-ne el manteniment o moure'l.
- Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact customer service.
- Keep the fan away from water or moisture. Do not immerse the fan in water or spray it with liquids.
- Assegureu-vos que el ventilador estigui col·locat sobre una superfície estable i plana per evitar que bolqui.
- No introduïu els dits ni objectes estranys a la reixeta mentre el ventilador està en funcionament.
- Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat. .
- Do not use the fan near curtains, drapes, or other objects that could be drawn into the fan.
- No utilitzeu el ventilador en zones on s'emmagatzemen líquids o gasos inflamables.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar el muntatge:
- Fan Head Assembly (includes front and rear grilles, dual blades, motor housing)
- Pal de suport ajustable
- Base Rodona
- Control remot
- Fasteners and Tools (e.g., base screw, grille screws)
Instruccions de muntatge
Follow these steps to assemble your standing floor fan:
- Enganxeu la base: Secure the adjustable stand pole to the round base using the provided screw. Ensure it is tightened firmly for stability.
- Prepare the Motor Housing: Remove any protective caps or nuts from the motor shaft on the fan head assembly.
- Install the Rear Grille: Place the rear grille onto the motor housing, aligning the notches. Secure it with the provided retaining nut.
- Mount the Dual Blades: The fan features a unique dual-blade system. First, slide the larger main blade onto the motor shaft, ensuring it is seated correctly against the rear grille. Then, slide the smaller blade onto the shaft in front of the main blade. Secure both blades with the blade cap, turning it counter-clockwise to tighten.
- Attach the Front Grille: Align the front grille with the rear grille and snap them together. Secure the grilles with the provided clips or screws around the perimeter.
- Connect Fan Head to Stand: Carefully attach the assembled fan head to the top of the adjustable stand pole. Ensure it clicks into place or is secured with the designated fastener.
Un va explotar view of the fan head reveals the unique dual-blade design, consisting of a larger main blade and a smaller inner blade. This design is engineered to create a softer, more natural airflow by minimizing turbulence.
Instruccions de funcionament
Tauler de control i control remot
The fan can be operated using the control panel on the unit or the included remote control. Ensure the fan is plugged into a standard 120V AC outlet.
The fan's integrated control panel features a digital display indicating current speed and timer settings. Buttons are provided for adjusting the timer, selecting breeze modes, controlling oscillation, and powering the unit on or off.
This diagram highlights key features: adjustable height from 44.4 to 53.1 inches, an adjustable tilt head, a digital display showing 12 speeds and 3 modes (Nature, Sleep, Normal), and the included remote control for adjusting speed, mode, and timer.
Funcions:
- Botó d'encendre (U): Premeu per encendre o apagar el ventilador.
- Configuració de velocitat: The fan offers 12 speed settings. Use the '+' and '-' buttons on the remote or the speed button on the control panel to adjust the airflow intensity.
- Botó de mode (~): Cycle through 3 specialized breeze modes:
- Normal: Flux d'aire constant a la velocitat seleccionada.
- Natura: Simula una brisa natural variant la velocitat del ventilador.
- Dormir: Redueix gradualment la velocitat del ventilador amb el temps per a un funcionament silenciós durant el repòs.
- Botó d'oscil·lació (O): Press to activate or deactivate the oscillating function, which sweeps the fan head from side to side to distribute air across a wider area.
- Botó del temporitzador (T): Set the fan to automatically turn off after a specified period (up to 12 hours). Each press typically adds one hour to the timer.
- Alçada ajustable: The fan's height can be adjusted from 44.4 to 53.1 inches by loosening and tightening the locking collar on the stand pole.
- Tilt Head: The fan head can be manually tilted up or down to direct airflow as desired.
Manteniment i Neteja
Una neteja regular ajuda a mantenir el rendiment del ventilador i n'allarga la vida útil.
- Desconnecta sempre el ventilador abans de netejar.
- Neteja exterior: Netegeu les superfícies exteriors del ventilador amb un drap suau iamp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Grille and Blades Cleaning: To clean the fan blades and inside the grilles, carefully remove the front grille (refer to assembly instructions in reverse). Wipe the blades and grilles with a soft, damp tela. Assegureu-vos que totes les peces estiguin completament seques abans de tornar a muntar.
- No deixeu que l'aigua degoti a la carcassa del motor.
- Guardeu el ventilador en un lloc fresc i sec quan no l'utilitzeu.
Resolució de problemes
If you encounter issues with your fan, refer to the table below for common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no s'encén. | No està connectat; la presa de corrent no funciona; el botó d'engegada no està premut. | Ensure the fan is securely plugged into a working outlet. Press the power button. Check circuit breaker. |
| Flux d'aire feble. | Low speed setting; grilles or blades are dirty. | Increase the speed setting. Unplug the fan and clean the grilles and blades. |
| El ventilador fa soroll. | Loose parts; fan not on a level surface; foreign object in blades. | Check for loose screws or components. Place the fan on a stable, level surface. Unplug and inspect blades for obstructions. |
| El comandament a distància no funciona. | Les piles estan gastades o mal inserides; el comandament a distància està fora de l'abast. | Replace batteries with new ones, ensuring correct polarity. Point the remote directly at the fan's receiver within range. |
| L'oscil·lació no funciona. | Funció d'oscil·lació no activada. | Premeu el botó d'oscil·lació del tauler de control o del comandament a distància. |
Especificacions
| Marca | Conceptes bàsics d'Amazon |
| Nom del model | FS40-16FR |
| Disseny de ventilador elèctric | Ventilador de terra |
| Font d'alimentació | Elèctric amb cable |
| Estil | 12-Speed, DC Motor |
| Dimensions del producte | 15.75" de profunditat x 17.72" d'amplada x 53.15" d'alçada (40.0 cm de profunditat x 45.0 cm d'amplada x 135.0 cm d'alçada) |
| Característica especial | 12 Speeds, 3 Modes, Oscillating, Remote Controlled, Adjustable Height, Tilt Head, Timer |
| Nivell de soroll | 50 decibels |
| Wattage | 28 watts |
| Nombre de fulles | 10 (Dual-Layered) |
| Voltage | 120 Volts |
| Pes de l'article | 11.86 lliures (5.38 kg) |
| Ús interior/exterior | Interior |
| UPC | 819079020839 |
Garantia i Suport
For warranty information or customer support, please refer to the Amazon Basics official weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Per a més ajuda, visiteu: Botiga bàsica d'Amazon