1. Producte acabatview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Característiques principals:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Capacitat de tall: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Guàrdia de seguretat: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Instruccions de seguretat
Llegiu i comprengueu sempre tots els avisos de seguretat, instruccions, il·lustracions i especificacions que s'inclouen amb aquesta eina elèctrica. Si no seguiu totes les instruccions que s'indiquen a continuació, podeu patir descàrregues elèctriques, incendis i/o lesions greus.
Advertències generals de seguretat:
- Utilitzeu l'equip de protecció individual (EPI) adequat, com ara ulleres de seguretat, protecció auditiva i guants.
- Assegureu-vos que la zona de treball estigui neta, ben il·luminada i lliure d'obstacles.
- Mantingueu els nens i els espectadors allunyats mentre feu servir l'eina.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Utilitzeu la fulla adequada per al material que es talla.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Components mésview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Unitat Motora
- Dipòsit d'aigua
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Guàrdia de la fulla
- Interruptor d'encesa/apagada
- Nansa de transport
Figura 1: Mésview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Configuració
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Desembalatge i inspecció
- Traieu amb cura tots els components de l'embalatge.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Assegureu-vos que tots els components enumerats siguin presents.
4.2 Omplir el dipòsit d'aigua
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Instruccions de funcionament
Follow these steps for safe and effective tile cutting.
5.1 Engegada/apagada
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Fer un tall
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Official Product Video: How to Use
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Manteniment
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Cleaning the Water Reservoir
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Desconnecteu la font d'alimentació.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Torneu a muntar els components.
6.2 Recanvi de fulla
Replace the diamond cutting disc when it becomes dull or damaged.
- Assegureu-vos que l'eina estigui desendollada.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tighten the retaining nut securely.
7. Solució De Problemes
This section addresses common issues you might encounter with your tile cutter.
| Problema | Causa possible | Solució |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| La màquina no arrenca | Sense font d'alimentació; interruptor defectuós; problema amb el motor. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Einhell |
| Número de model | 4301185 |
| Poder | 800 watts |
| Voltage | 240 Volts |
| Velocitat | 2950 RPM |
| Diamond Cutting Disc Diameter | 180 mm |
| Alçada màxima de tall (90°) | 34 mm |
| Alçada màxima de tall (45°) | 14 mm |
| Angle of Cut | 45 graus |
| Table Dimensions (L x W) | 39.6 cm x 38.5 cm |
| Dimensions del producte (L x A x A) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Pes del producte | 9.1 quilos |
| Font d'alimentació | Elèctric amb cable |
| Característiques especials | Adjustable angle stop, parallel stop with scale |
9. Garantia i Suport
9.1 Informació de la garantia
This Einhell product comes with a Garantia limitada d'2 anySi us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.
9.2 Atenció al client
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell weblloc web o l'embalatge del producte per obtenir la informació de contacte més actualitzada.