InnoGear AD308

InnoGear AD308 Real Bamboo Essential Oil Diffuser

Model: AD308 | Brand: InnoGear

Garanties importants

To reduce the risk of electric shock, fire, or injury, please read all instructions carefully before using this appliance.

  • Always place the diffuser on a flat, stable surface.
  • Do not exceed the MAX water line when filling the water tank.
  • Assegureu-vos que la tapa estigui ben tancada abans de fer funcionar.
  • Do not allow water to flow into the air outlet when pouring.
  • Unplug the diffuser from the power outlet when not in use or before cleaning.
  • Mantenir fora de l'abast dels nens i mascotes.
  • This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Utilitzeu només l'adaptador d'alimentació subministrat.
  • No submergiu el difusor en aigua ni en cap altre líquid.
  • Clean the diffuser regularly after every 3 uses to prevent mineral buildup and ensure optimal performance.

Diagrama del producte

Diagram showing the upgraded air outlet design and drain side of the InnoGear AD308 diffuser.

Upgraded Air Outlet Design: This diagram highlights the specially designed air outlet and the drain side. When pouring water, avoid the air outlet to prevent damage.

Diagram showing the dimensions of the InnoGear AD308 diffuser: 3.9 inches diameter, 7.9 inches height, and 160ml capacity.

Dimensions del producte: The diffuser measures approximately 3.9 inches in diameter and 7.9 inches in height, with a 160ml water capacity.

Especificacions

Número de modelAD308
MaterialBPA-free Bamboo
Capacitat d'aigua160 ml
Configuració del temporitzador1 Hr / 2 Hrs
Modes de nebulitzacióIntermittent (mist and pause per 10s) / Continuous
Poder10 W
Voltage110-240 V
Apagat automàticSí (quan el nivell de l'aigua és baix)
Llum LED7-Color (adjustable)
Dimensions3.94 x 7.87 x 3.94 polzades
Pes1.15 lliures

Contingut del paquet

  • 1 x InnoGear AD308 Essential Oil Diffuser
  • 1 x Tassa de mesura
  • 1 x adaptador de corrent
  • 1 x Manual d'usuari

Configuració

  1. Col·loca el difusor: Position the diffuser on a flat, stable, and water-resistant surface.
  2. Traieu la tapa: Gently remove the bamboo outer cover and the inner lid.
  3. Afegeix aigua: Using the provided measuring cup, fill the water tank with clean tap water up to the MAX line (160ml). Do not overfill.
  4. Afegeix oli essencial: Add 3-5 drops of your preferred essential oil directly into the water tank. Adjust the amount based on personal preference.
  5. Replace Lids: Securely place the inner lid back, followed by the bamboo outer cover. Ensure both are properly aligned.
  6. Connectar l'alimentació: Plug the power adapter into the diffuser's power input port, then plug the adapter into a standard electrical outlet.

Video: InnoGear Upgraded Real Bamboo Diffuser Setup. This video demonstrates the process of setting up and operating the InnoGear AD308 diffuser, including adding water and essential oils, and activating mist and light functions.

Instruccions de funcionament

Control de boira

  • Premeu el botó Botó de boira (left button) once to turn on continuous mist mode.
  • Premeu el botó Botó de boira a second time for intermittent mist mode (mists for 10 seconds, pauses for 10 seconds).
  • Premeu el botó Botó de boira a third time to set the timer for 1 hour.
  • Premeu el botó Botó de boira a fourth time to set the timer for 2 hours.
  • Premeu el botó Botó de boira a fifth time to turn off the mist function.
  • The diffuser will automatically shut off when the water level is low, regardless of the timer setting.

Control de la llum

  • Premeu el botó Botó de llum (right button) once to turn on the 7-color changing LED light.
  • Premeu el botó Botó de llum again to fix the light to a specific color. Each press will cycle through the available colors.
  • Manteniu premut el botó Botó de llum durant 2 segons per apagar la llum.

Manteniment

Regular cleaning is essential to ensure the longevity and optimal performance of your diffuser. Clean the diffuser after every 3 uses or when changing essential oils.

Procediment de neteja

  1. Desconnectar: Disconnect the diffuser from the power outlet.
  2. Aigua buida: Remove the lids and carefully pour out any remaining water from the drain side of the tank. Avoid pouring water into the air outlet.
  3. Neteja el dipòsit: Use a soft cloth or cotton swab with a small amount of mild dish soap to gently wipe the inside of the water tank and the ultrasonic plate.
  4. Esbandida: Rinse the tank with clean water, again being careful to avoid the air outlet.
  5. Seca: Wipe all parts dry with a clean, soft cloth. Ensure all components are completely dry before reassembling or storing.
  6. Neteja de la tapa: Wipe the bamboo lid with a damp drap i assecar bé.

Note: Do not use harsh detergents, solvents, or abrasive cleaners, as these may damage the diffuser.

Resolució de problemes

ProblemaCausa possibleSolució
Sense boira o baixa producció de boira
  • Falta d'aigua al dipòsit.
  • Water level exceeds the MAX line.
  • Water or essential oil residue on the ultrasonic plate.
  • Air outlet blocked.
  • Afegiu aigua fins al nivell adequat.
  • Empty some water if overfilled.
  • Netegeu la placa ultrasònica segons les instruccions de manteniment.
  • Ensure the air outlet is clear and not obstructed.
El difusor no s'encén
  • Sense connexió elèctrica.
  • Nivell d'aigua massa baix (apagada automàtica activada).
  • L'adaptador de corrent no està connectat correctament.
  • Check if the power adapter is securely plugged into both the diffuser and the wall outlet.
  • Ompliu el dipòsit d'aigua al nivell adequat.
  • Ensure the correct power adapter is used.
No scent or weak scent
  • Insufficient essential oil.
  • Poor quality essential oil.
  • Diffuser needs cleaning.
  • Afegiu més gotes d'oli essencial.
  • Use high-quality, pure essential oils.
  • Clean the diffuser thoroughly.

Garantia i Suport

For warranty information or technical support, please contact InnoGear customer service. Refer to the contact details provided with your purchase or visit the official InnoGear weblloc.

Weblloc: InnoGear Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.