JEGS 62102

JEGS Complete Transmission Rebuild Kit Instruction Manual

Model: 62102

1. Introducció

This instruction manual provides essential information for the JEGS Complete Transmission Rebuild Kit, designed for 1969-1986 GM or Chevy TH-350 automatic transmissions. This kit is specifically for non-lockup models with a 30-spline input shaft. It contains a comprehensive set of components required for a thorough transmission overhaul, aiming to restore optimal performance and extend the life of your transmission.

Proper installation and adherence to established automotive repair practices are crucial for the successful operation of the rebuilt transmission. If you are not experienced in transmission repair, professional assistance is highly recommended.

2. Contingut del kit

The JEGS Complete Transmission Rebuild Kit includes the following components:

  • High-Energy Clutches & Band
  • Steel Clutch Plates
  • All paper gaskets
  • Pan gasket
  • Rubber O-rings
  • Rubber lip seals
  • Metal clad seals
  • Anells de tancament
  • Thrust washer kit
  • Filtre
  • Front & rear bushings
  • Modulador
JEGS TH-350 Complete Transmission Rebuild Kit components laid out
Imatge 2.1: acabatview of the JEGS TH-350 Complete Transmission Rebuild Kit components. This image displays various gaskets, seals, clutch plates, bands, and other small parts included in the kit, laid out for inspection.

3. Instal·lació i configuració

3.1 Precaucions de seguretat

  • Utilitzeu sempre l'equip de protecció individual (EPI) adequat, incloent-hi ulleres i guants de seguretat.
  • Assegureu-vos que el vehicle estigui ben recolzat sobre gats o un elevador abans de treballar a sota.
  • Disconnect the vehicle's battery before beginning work.
  • Treballar en una zona ben ventilada.
  • Transmission fluid can be hot; allow the transmission to cool before draining.

3.2 Passos generals d'instal·lació

The following steps outline a general procedure for rebuilding a TH-350 transmission. Refer to a comprehensive service manual for your specific vehicle and transmission model for detailed, step-by-step instructions, torque specifications, and diagnostic procedures.

  1. Transmission Removal: Safely remove the transmission from the vehicle. Drain all fluid and disconnect all linkages, electrical connections, and cooler lines.
  2. Desmuntatge: Disassemble the transmission carefully, keeping all components organized. Document the order of removal and orientation of parts, especially clutch packs and planetary gears. Inspect all hard parts for wear or damage.
  3. Neteja i inspecció: Thoroughly clean all reusable components. Inspect the transmission case, valve body, drums, shafts, and gears for cracks, scoring, or excessive wear. Replace any damaged hard parts not included in this kit.
  4. Substitució de components: Replace all gaskets, O-rings, lip seals, metal clad seals, and sealing rings with the new components from the JEGS kit. Install the new high-energy clutches, steel plates, and band. Replace the front and rear bushings, filter, and modulator. Ensure all thrust washers are correctly installed.
  5. Remuntatge: Reassemble the transmission in the reverse order of disassembly, paying close attention to proper clearances and torque specifications. Lubricate all moving parts with clean transmission fluid during assembly.
  6. Transmission Installation: Reinstall the rebuilt transmission into the vehicle. Reconnect all linkages, electrical connections, and cooler lines. Ensure all bolts are torqued to factory specifications.
  7. Fluid Fill: Fill the transmission with the recommended type and amount of new transmission fluid.

4. Operating (Post-Rebuild)

4.1 Initial Startup and Checks

  • After filling with fluid, start the engine and allow it to idle. Cycle the shifter through all gear positions (P, R, N, D, 2, 1) several times, pausing in each gear.
  • Recheck the fluid level with the engine running and the transmission in Park or Neutral (refer to your vehicle's service manual for the correct procedure). Add fluid as necessary until the correct level is reached.
  • Inspect for any leaks around the transmission case, pan, and cooler lines.

4.2 Break-in Procedure

A proper break-in period is important for new clutch and band materials. Drive the vehicle gently for the first 500 miles, avoiding hard acceleration, heavy towing, or aggressive driving. This allows the new components to seat properly and ensures optimal performance and longevity.

5. Manteniment

Regular maintenance is essential for the continued reliable operation of your rebuilt transmission.

  • Canvis de fluids i filtres: Adhere to your vehicle manufacturer's recommended schedule for transmission fluid and filter changes. Use only the specified type of transmission fluid.
  • Inspecció de fuites: Periodically inspect the transmission for any signs of fluid leaks. Address any leaks promptly to prevent fluid loss and potential damage.
  • Sistema de refrigeració: Ensure the transmission cooling system is functioning correctly to prevent overheating, which can severely damage transmission components.

6. Solució De Problemes

If you encounter issues after rebuilding your transmission, consider the following common problems and potential causes:

SímptomaCausa possible
Fuites de fluidsImproperly seated gaskets or seals, damaged pan, loose bolts, incorrect torque.
No Engagement / Delayed EngagementLow fluid level, incorrect band adjustment, valve body issues, internal assembly error.
Harsh Shifting / SlippingLow fluid level, incorrect band adjustment, worn clutch plates (if not replaced correctly), modulator issue, valve body malfunction.
SobreescalfamentLow fluid level, restricted cooler lines, faulty torque converter, internal friction.

For persistent or complex issues, it is strongly recommended to consult a qualified transmission specialist or refer to a detailed service manual for diagnostic procedures.

7. Especificacions

  • Marca: JEGS
  • Número de model: 62102
  • Número de peça OEM: 62102
  • Compatibilitat: 1969-1986 GM/Chevy TH-350 (non-lockup) with 30-spline input shaft
  • Pes de l'article: 9.4 lliures
  • Dimensions del producte: 23 x 15.5 x 4.2 polzades
  • País d'origen: Fabricat als EUA

8. Garantia i Suport

For specific warranty information regarding your JEGS Complete Transmission Rebuild Kit, please refer to the documentation included with your purchase or contact JEGS directly. For technical support or inquiries, please visit the official JEGS weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Podeu trobar més informació i dades de contacte a JEGS Store Page.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.