MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch User Manual

Introducció

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of the MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch. This device is designed for industrial networking applications, offering 8 10/100/1000BaseT PoE/PoE+ ports and 4 100/1000BaseSFP slots, capable of operating in harsh environments from -40 to 75°C.

Please read this manual thoroughly before operating the device to ensure proper functionality and safety.

Contingut del paquet

• MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch
• Guia d'instal·lació ràpida
• Targeta de garantia
• Mounting Kit (if applicable)

Verify all items are present and undamaged. Contact your vendor if any items are missing or damaged.

Configuració

1. Instal·lació física

The EDS-G512E-8PoE-4GSFP-T switch is designed for DIN-rail or wall mounting. Ensure the installation location provides adequate ventilation and is within the specified operating temperature range (-40 to 75°C).

Figura 1: Frontal view of the MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch, showing the 8 PoE ports and 4 SFP slots.

2. Connexió d'alimentació

Connect a 48 VDC power source to the terminal block on the switch. Ensure correct polarity. The switch supports redundant power inputs for enhanced reliability. Refer to the Quick Installation Guide for detailed wiring diagrams.

• Entrada Voltage: 48 VDC
• Redundància: Dual power inputs

3. Connexió a la xarxa

Connect Ethernet cables to the 10/100/1000BaseT PoE/PoE+ ports for standard network devices and PoE-powered devices. Insert SFP modules into the 100/1000BaseSFP slots for fiber optic connections. Ensure SFP modules are compatible with the switch and your fiber infrastructure.

• Ports PoE: 8 x 10/100/1000BaseT (PoE/PoE+)
• Ranures SFP: 4 x 100/1000BaseSFP

En funcionament

1. Encès

Once power is connected, the switch will automatically power on. Observe the power LED indicators to confirm proper power supply.

2. Indicadors LED

The switch features various LED indicators to display its status and port activity:

• PWR1/PWR2: Indicates power status for input 1 and 2. (Green: Power OK, Off: No Power)
• FALLA: Indicates system fault. (Red: Fault detected, Off: No fault)
• MSTR/CPLR: Indicates redundant ring status.
• Port LEDs (Link/Act): Indicates link status and data activity for each port. (Green: Link established, Blinking Green: Data activity, Off: No link)
• LED PoE: Indicates PoE power status for PoE ports. (Green: PoE power supplied, Off: No PoE power)

3. Gestió de xarxa

The EDS-G512E-8PoE-4GSFP-T is a managed switch. It can be configured and monitored via a web-based interface, Telnet/SSH, or SNMP. Refer to the product's software manual for detailed instructions on accessing and configuring the management interface.

• Adreça IP predeterminada: Consult the Quick Installation Guide or product documentation.
• Nom d'usuari/contrasenya per defecte: Consult the Quick Installation Guide or product documentation.

Manteniment

1. Neteja

Netegeu periòdicament l'exterior de l'interruptor amb un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol. Assegureu-vos que el dispositiu estigui apagat abans de netejar-lo.

2. Actualitzacions de firmware

Reviseu regularment el fabricant website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware package carefully.

3. Consideracions ambientals

Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage and ensure optimal performance.

Resolució de problemes

1. Sense poder

• Check power cable connections to the switch and power source.
• Verifiqueu que la font d'alimentació estigui activa i que proporcioni el volum correctetage (48 VDC).
• Check the PWR1/PWR2 LEDs on the switch.

2. Sense connectivitat de xarxa

• Assegureu-vos que els cables Ethernet estiguin connectats correctament tant al commutador com al dispositiu de xarxa.
• Check the Link/Act LEDs for the respective port. A solid green indicates a link, blinking indicates activity.
• Verify network settings on connected devices.

3. El dispositiu PoE no s'encén

• Ensure the connected device is PoE compatible.
• Check the PoE LED for the specific port. A solid green indicates PoE power is being supplied.
• Verify the total power budget of the switch is not exceeded.

4. System Fault (FAULT LED is Red)

If the FAULT LED is red, consult the product's software manual or contact technical support for advanced diagnostics.

Especificacions

Garantia i Suport

Informació de la garantia

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in the package or visit the official Moxa weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.

Suport tècnic

For technical assistance, product documentation, or software downloads, please visit the official Moxa support website. You may also contact Moxa customer service directly for further assistance.

Moxa Official Weblloc: www.moxa.com