Introducció
Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.
Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.
Informació de seguretat
Si us plau, observeu les següents precaucions de seguretat durant la instal·lació i el funcionament:
- ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances.
- Assegureu-vos el subministrament voltage is compatible with the fixture's requirements (100-277V AC).
- No manipuleu l'aparell amb les mans mullades ni quan estigueu sobre superfícies humides o drop.amp superfícies.
- This fixture is designed for outdoor use and is IP65 rated for wet locations.
- Do not attempt to modify or disassemble the fixture beyond what is described in this manual.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
- Photocell (pre-installed)
- Non-photocell cover (for disabling photocell function)
- Material de muntatge (cargols, femelles)
- Manual d'instruccions
Característiques del producte
- Eficient energètic: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
- Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
- Cap ajustable: Fixture angle can be adjusted 0-90 degrees for precise light direction.
- Construcció duradora: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
- Llarga vida útil: LEDs sense manteniment amb una vida útil de 50,000 hores.
Configuració i instal·lació
Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.
1. Muntatge del dispositiu
- Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
- Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
- Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.
Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.
2. Connexions de cablejat
- Connect the fixture's black wire to the supply's live/hot wire.
- Connect the fixture's white wire to the supply's neutral wire.
- Connect the fixture's green/ground wire to the supply's ground wire.
- Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
- Introduïu amb cura tots els cables a la caixa de connexió.
3. Securing the Fixture
- Attach the fixture body to the mounted plate, ensuring it is securely hinged.
- Close the fixture and tighten any securing screws to ensure a watertight seal.
Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.
4. Photocell Configuration (Optional)
The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.
- To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
- Pull out the existing photocell.
- Screw in the non-photocell cover into the opening.
- Torneu a muntar la lamp habitatge.
Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.
Instruccions de funcionament
Funcionament de la fotocèl·lula
If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.
Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.
Ajust del capçal de llum
The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.
Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.
Manteniment
The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.
- Neteja: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o la lent.
- Inspecció: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- Els LED estan integrats i no els pot substituir l'usuari.
Resolució de problemes
If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén | Sense font d'alimentació Cablejat defectuós Photocell malfunction (if installed) | Comproveu l'interruptor i les connexions d'alimentació. Verifiqueu que les connexions del cablejat siguin segures. Ensure photocell is not obstructed or try replacing it with the non-photocell cover to test. |
| La llum es manté encesa durant el dia | Photocell obstructed or receiving insufficient light Mal funcionament de la fotocèl·lula | Clear any obstructions from the photocell. Ensure it is exposed to natural daylight. Test with the non-photocell cover. |
| La llum parpelleja | Connexió de cablejat solta Voltage fluctuacions | Comproveu i fixeu totes les connexions del cablejat. Consult a qualified electrician to check power supply stability. |
Especificacions
Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.
| Atribut | Valor |
|---|---|
| Marca | DAKASON |
| Número de model | WP-30D-50 |
| Wattage | 30 watts |
| Brillantor | 3300 lúmens |
| Temperatura de color | 5000 Kelvin (blanc fred) |
| Voltage | 100-277 volts (CA) |
| Material | Alumini fos a pressió, vidre temperat |
| Dimensions (L x A x A) | 6.6" x 7.9" x 4.3" |
| Pes de l'article | 4 lliures |
| Classificació IP | IP65 (impermeable) |
| Característiques especials | Dusk-to-Dawn Photocell, Adjustable Head, Full Cut-Off, Instant On, Not Dimmable, Shatter Resistant |
| Certificacions | Llistat per ETL |
| UPC | 766832159971 |
Informació de la garantia
This DAKASON LED Wall Pack comes with a 5 any de garantia. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.
Atenció al client
For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.