Huayu K-VT138

Huayu Universal A/C Remote Control

Model: K-VT138

Introducció

Thank you for choosing the Huayu Universal A/C Remote Control, Model K-VT138. This remote control is designed for 100% compatibility with various Voltas Air Conditioner (AC) models, providing convenient access to all control options. This manual provides essential information for proper setup, operation, and maintenance of your new remote control.

Informació de seguretat

  • No barregeu piles velles i noves.
  • No barregeu piles alcalines, estàndard (carboni-zinc) o recarregables (níquel-cadmi).
  • Traieu sempre les piles gastades immediatament per evitar fuites i danys.
  • Eliminar les bateries usades d'acord amb la normativa local.
  • Mantingueu el comandament a distància allunyat de la llum solar directa, de fonts de calor i de la humitat.
  • Eviteu deixar caure el comandament a distància ni sotmetre'l a impactes forts.

Configuració

Instal·lació de la bateria

The remote control requires two AA batteries for operation. Ensure correct polarity (+/-) when inserting the batteries.

  1. Obriu la tapa del compartiment de les piles que es troba a la part posterior del comandament a distància.
  2. Insert two AA batteries, matching the polarity indicators inside the compartment.
  3. Tanqueu bé la tapa del compartiment de la bateria.

Pairing with your Voltas AC (Auto Search)

This remote control features an auto-search function to quickly pair with your Voltas AC unit. Follow these steps:

  1. Point the remote control towards your Voltas AC unit.
  2. Press and hold the "SET" button for approximately 6 seconds. The remote will begin to cycle through various codes.
  3. Observe your AC unit. When the AC unit reacts (e.g., turns on, makes a sound, or changes mode), immediately release the "SET" button.
  4. The remote control is now paired with your AC unit. Test basic functions like On/Off and temperature adjustment to confirm.
Back of the Huayu Universal A/C Remote Control showing battery compartment and auto-search instructions.

Image: Back of the remote control detailing the auto-search pairing process. The instructions indicate to press and hold 'SET' for about 6 seconds for code change, and to release 'SET' immediately when the A/C reacts.

Instruccions de funcionament

Once paired, the remote control functions similarly to your original AC remote. Common functions include:

  • Encès/apagat: Press the power button to turn the AC unit on or off.
  • Ajust de temperatura: Feu servir els botons de pujar/baixar la temperatura per ajustar la temperatura desitjada.
  • Selecció del mode: Cycle through modes such as Cool, Fan, Dry, or Heat (if supported by your AC unit).
  • Velocitat del ventilador: Ajusteu la velocitat del ventilador (per exemple, Baixa, Mitjana, Alta, Automàtica).
  • Control de balanceig/àleps: Control the direction of the airflow (if supported).

Refer to your Voltas AC unit's manual for specific functions and their corresponding buttons on the remote.

Manteniment

  • Neteja: Netegeu el comandament a distància amb un drap suau i sec. No utilitzeu netejadors líquids ni materials abrasius.
  • Substitució de la bateria: Replace batteries when the remote's range decreases or it stops responding. Always replace both batteries at the same time with new ones of the same type.
  • Emmagatzematge: Si no feu servir el comandament a distància durant un període prolongat, traieu-ne les piles per evitar fuites.

Resolució de problemes

  • El comandament a distància no respon: Check if the batteries are inserted correctly and are not depleted. Replace batteries if necessary. Ensure there are no obstructions between the remote and the AC unit's receiver.
  • Interval de funcionament curt: Això normalment indica que la bateria està baixa. Canvieu les piles.
  • AC unit not reacting after pairing: Repeat the auto-search pairing process. Ensure you release the "SET" button immediately when the AC unit reacts.
  • Algunes funcions no funcionen: While this is a universal remote, some very specific functions of your original AC remote might not be supported. Ensure the remote is correctly paired.

Especificacions

CaracterísticaEspecificació
MarcaHuayu
Número de modelK-VT138
Dispositius compatiblesVoltas A/C
Connectivitat de xarxainfrarojos
Tipus de controladorControl de botons
Nombre de bateriesEs necessiten 2 piles AA
Tipus de bateriaAlcalí
Pes de l'article58.12 grams
ColorBlanc
Característiques especialsLong Range, Premium Quality Plastic Body, Soft Rubber Keypads, Durable

Garantia i Suport

For warranty information or technical support, please refer to the retailer or manufacturer's official contact channels. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.