Mabe EMDPCCB2 Water Dispenser User Manual

1. Introducció

Thank you for choosing the Mabe EMDPCCB2 Water Dispenser. This manual provides essential information for the safe and efficient use of your new appliance. Please read these instructions carefully before installation and operation, and retain them for future reference.

Informació important de seguretat

• Connecteu sempre el dispensador a una presa de corrent amb connexió a terra.
• No feu funcionar el dispensador si el cable d'alimentació està danyat.
• Mantingueu el dispensador allunyat de la llum solar directa i de fonts de calor.
• Assegureu-vos una ventilació adequada al voltant de la unitat.
• Aquest aparell no està dissenyat per ser utilitzat per persones amb capacitats físiques, sensorials o mentals reduïdes tret que estiguin supervisades.
• The hot water function includes a child safety lock. Always supervise children around the dispenser.

2. Producte acabatview

The Mabe EMDPCCB2 Water Dispenser provides convenient access to cold, room temperature, and hot water. It features a sleek design and a bottom storage cabinet.

Imatge 2.1: Frontal view of the Mabe EMDPCCB2 Water Dispenser, showing the dispensing area and controls.

Característiques principals:

• Three Temperature Taps: Dispenses cold, room temperature, and hot water.
• Interruptor de refrigeració: Allows control over the cooling function.
• Interruptor de calefacció: Allows control over the heating function.
• Pany de seguretat infantil: Evita el subministrament accidental d'aigua calenta.
• Armari d'emmagatzematge: Integrated cabinet for convenient storage.

Imatge 2.2: Primer pla view of the control panel and dispensing buttons, including the red child safety lock button for hot water.

3. Configuració

3.1 Desembalatge

1. Traieu amb cura el dispensador del seu embalatge.
2. Traieu tots els materials d'embalatge, inclosa la cinta adhesiva o les pel·lícules protectores.
3. Inspect the dispenser for any signs of damage. If damaged, do not use and contact customer support.

3.2 Col·locació

• Col·loqueu el dispensador sobre una superfície ferma i plana capaç de suportar-ne el pes quan estigui ple.
• Ensure there is at least 10 cm (4 inches) of space around the back and sides for proper ventilation.
• Avoid placing the dispenser in direct sunlight or near heat-generating appliances.
• Position the dispenser near a grounded electrical outlet.

3.3 Instal·lació d'ampolles d'aigua

1. Clean the neck of the water bottle before placing it on the dispenser.
2. Carefully invert the water bottle and place it firmly onto the support collar on top of the dispenser. Ensure it is seated correctly to prevent leaks.

3.4 Ús inicial

1. After installing the water bottle, allow approximately 5 minutes for the water reservoirs to fill.
2. Connecteu el cable d'alimentació a una presa elèctrica amb connexió a terra.
3. Activate the cooling and heating switches located at the back of the unit (if not already on).
4. Dispense a small amount of water from each tap (cold, room temperature, hot) to ensure proper flow and to prime the system.
5. Allow 15-30 minutes for the water to reach optimal cold and hot temperatures before first use.

4. Instruccions de funcionament

4.1 Dispensació d'aigua freda

• Place a cup under the cold water tap.
• Press the blue cold water button to dispense. Release the button to stop.

4.2 Distribució d'aigua calenta

• Place a heat-resistant cup under the hot water tap.
• To dispense hot water, first press and hold the red child safety lock button, then press the red hot water button.
• Release both buttons to stop dispensing.
• Precaució: Hot water can cause burns. Always use the child safety lock and supervise children.

4.3 Dispensing Room Temperature Water

• Place a cup under the room temperature water tap.
• Press the black room temperature water button to dispense. Release the button to stop.

4.4 Temperature Control Switches

The cooling and heating functions can be controlled independently using the switches located on the back of the dispenser. Turn off these switches when the respective function is not needed to conserve energy.

• Interruptor de refrigeració: Controls the cold water function.
• Interruptor de calefacció: Controls the hot water function.

5. Manteniment

5.1 Neteja exterior

• Desendolleu el dispensador de la presa de corrent abans de netejar-lo.
• Netegeu les superfícies exteriors amb un damp tela.
• No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat.

5.2 Neteja de la safata de degoteig

• Regularly remove and empty the drip tray located below the dispensing taps.
• Wash the drip tray with mild soap and water, then rinse thoroughly and dry before replacing.

5.3 Neteja de la serpentina del condensador

Periodically clean the condenser coils located at the back of the unit to ensure efficient operation. Use a soft brush or vacuum cleaner to remove dust and debris.

6. Solució De Problemes

Problemes comuns i solucions:

• No Cold Water:
  • Ensure the cooling switch is ON.
  • Check if the dispenser is plugged in and receiving power.
  • Allow sufficient time for cooling (15-30 minutes).
• Sense aigua calenta:
  • Ensure the heating switch is ON.
  • Check if the dispenser is plugged in and receiving power.
  • Allow sufficient time for heating.
  • Ensure the child safety lock is properly engaged when dispensing.
• Fuita d'aigua:
  • Check if the water bottle is properly seated on the support collar.
  • Inspect the water bottle for cracks or damage.
  • Ensure the drip tray is not overflowing.
• Soroll inusual:
  • Ensure the dispenser is on a level surface.
  • Check for any obstructions around the compressor area.

If the problem persists after attempting these solutions, please contact Mabe customer support.

7. Especificacions

8. Garantia i Suport

For warranty information, service, repairs, or maintenance, please contact Mabe customer service. Keep your purchase receipt as proof of purchase.

Image 8.1: Mabe Service contact information for installation, repair, and maintenance. Telephone: 461 471 7000, WhatsApp: 55 41635939.

When contacting support, please have your model number (EMDPCCB2) and purchase date available.