Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch User Manual

1. Producte acabatview

This manual provides instructions for the installation and operation of the Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch. This device is designed for smooth, full-range dimming of white LED lighting using capacitive sensing technology. It features a small control unit and a 1-inch peel-and-stick stainless steel remote sensor disk, allowing for flexible placement and innovative control solutions for various lighting applications.

Image 1.1: Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch.

2. Informació de seguretat

• Always disconnect power before installing or servicing the dimmer.
• This product is intended for use with 12V or 24V DC LED lighting systems only.
• No supereu la potència màximatage potència de 96 watts.
• Assegureu-vos que totes les connexions estiguin ben fixades i degudament aïllades per evitar curtcircuits.
• For best results, the Remote Touch LED Dimmer should be electrically isolated from other devices to prevent interference.
• Consulteu un electricista qualificat si teniu dubtes sobre alguna part del procés d'instal·lació.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• One (1) Armacost Lighting 511121 Remote Touch Dimmer Module
• One (1) 1-inch Peel-and-Stick Stainless Steel Remote Sensor Disk

Image 3.1: The dimmer module and the remote touch sensor disk.

4. Especificacions

5. Configuració i instal·lació

Follow these steps for proper installation of your Remote Touch Dimmer:

1. Desconnexió d'alimentació: Ensure all power to the lighting circuit is turned off at the breaker before beginning installation.
2. Connecteu-vos a la font d'alimentació: Connect the dimmer module to a compatible 12V or 24V DC LED power supply (sold separately). Refer to the power supply's instructions for proper wiring.
3. Connect to LED Lighting: Connect the dimmer module's output to your Armacost Lighting RibbonFlex Pro White Tape Light or other compatible white LED lighting. This dimmer is specifically designed for white LED tape light.
4. Unitat de control de muntatge: Mount the main control unit in a secure, accessible location, ensuring proper ventilation.
5. Mount Sensor Disk: The 1-inch peel-and-stick stainless steel remote sensor disk can be surface-mounted or countersunk for a flush installation. Place it in a convenient location where touch control is desired. The sensor disk connects to the control unit via a 48-inch thin wire lead.
6. Aïllament elèctric: For optimal performance and to prevent interference, ensure the Remote Touch LED Dimmer is electrically isolated from other devices.
7. Restaura l'alimentació: Once all connections are secure and installation is complete, restore power to the circuit.

Image 5.1: Dimmer module showing input and output wiring terminals.

Imatge 5.2: Detallada view of the touch sensor dimmer module and its remote disk.

6. Instruccions de funcionament

The Armacost Lighting 511121 Remote Touch Dimmer provides intuitive control over your LED lighting:

• Activar/Desactivar: Simplement toqueu the stainless steel sensor disk to turn the connected LED lights on or off.
• Dimecres: Per ajustar la brillantor, toca i mantén premut the sensor disk. The lights will smoothly dim up or down. Release your finger when the desired brightness level is reached.
• Memòria de brillantor: The dimmer features a memory function that saves the last brightness setting. When the lights are turned back on, they will return to the previously set level.

Imatge 6.1: Ex.ample of under cabinet LED lighting, which can be controlled by the touch dimmer.

7. Manteniment

The Armacost Lighting 511121 Remote Touch Dimmer requires minimal maintenance:

• Neteja: Wipe the sensor disk and dimmer module with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or internal components.
• Inspecció: Reviseu periòdicament totes les connexions del cablejat per assegurar-vos que es mantinguin segures.
• Medi ambient: Ensure the dimmer module is not exposed to excessive moisture or extreme temperatures outside its operating range (32°F to 80°C).

8. Solució De Problemes

If you encounter issues with your Remote Touch Dimmer, refer to the following common solutions:

• Els llums no s'encenen:
  • Verify that the power supply is connected and receiving power.
  • Check all wiring connections between the power supply, dimmer module, and LED lighting.
  • Ensure the LED lighting is compatible with a 12V or 24V DC system and is not exceeding the dimmer's 96-watt capacity.
• Dimming Not Functioning Correctly:
  • Ensure the sensor disk is clean and free of obstructions.
  • Confirm the sensor disk's wire lead is securely connected to the dimmer module.
  • Check for any electrical interference from nearby devices; ensure the dimmer is electrically isolated.
• Funcionament intermitent:
  • This dimmer is designed to work specifically with Armacost Lighting RibbonFlex Pro White Tape Light. Incompatibility with other LED products may cause issues.
  • Re-check electrical isolation as interference can cause erratic behavior.

9. Garantia i Suport

The Armacost Lighting 511121 Remote Touch Dimmer and On/Off Switch comes with a Garantia limitada d'un any. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For technical support, warranty claims, or additional product information, please contact Armacost Lighting directly. Refer to the official Armacost Lighting weblloc web o l'embalatge del producte per obtenir les dades de contacte actuals.