Utilitech GYQ27-W Motion Sensor Instruction Manual

Producte acabatview

The Utilitech GYQ27-W is a white wire-in replacement motion sensor designed for outdoor lighting applications. It provides automatic light control by detecting motion and activating the light for a set duration. This sensor offers wide coverage and includes features for energy efficiency and manual override.

Figura 1: Davant view of the Utilitech GYQ27-W White Wire-in Replacement Motion Sensor. The sensor features a compact, white housing with a translucent detection lens at the front and a threaded base for wire-in installation.

Característiques clau

• Automatic Light Control: Turns lights on when motion is detected.
• Temporitzador ajustable: Light remains on for 1, 3, or 10 minutes after motion ceases, with a 5-second test mode.
• Àmplia cobertura: Provides up to 240° coverage and 69-ft of downward perimeter protection.
• Sensor del capvespre a l'alba: S'activa automàticament al capvespre i es desactiva a l'alba.
• Àmplia compatibilitat: Compatible with dimmable LED, dimmable CFL, halogen, and incandescent bulbs.
• Eficiència energètica: Features 2-level brightness technology.
• Anulació manual: Allows the light to operate constantly for a selected period.

Configuració i instal·lació

Proper installation is crucial for optimal performance and safety. It is recommended to consult a qualified electrician if you are unsure about any steps.

Precaucions de seguretat

• Desconnecteu sempre l'alimentació a l'interruptor automàtic abans de la instal·lació o el manteniment.
• Assegureu-vos que les connexions del cablejat siguin segures i que compleixin amb els codis elèctrics locals.
• No supereu la potència màximatage rating of the connected lighting fixture.

Passos d'instal·lació

1. Apagueu l'alimentació: Locate the circuit breaker controlling the outdoor light fixture and switch it to the OFF position. Verify power is off using a voltage provador.
2. Remove Existing Sensor (if applicable): Carefully disconnect the wiring from the old motion sensor or light fixture.
3. Connecteu el cablejat: Follow the wiring diagram provided with your specific light fixture. Typically, this involves connecting the sensor's wires (line, load, neutral) to the corresponding wires from the power supply and the light fixture. Ensure all connections are tight and insulated with wire nuts.
4. Muntatge del sensor: Securely mount the Utilitech GYQ27-W motion sensor to the desired location. Ensure it has a clear line of sight to the area you wish to monitor.
5. Restaura l'alimentació: Once all connections are secure and the sensor is mounted, turn the power back on at the circuit breaker.

Instruccions de funcionament

The GYQ27-W motion sensor offers several adjustable settings to customize its operation.

Ajust de la configuració

• Configuració de l'hora: The sensor allows you to set the duration the light remains on after motion is detected. Common settings are 1, 3, or 10 minutes. Refer to the sensor's physical controls for specific adjustment methods (e.g., dial, switch).
• Mode de prova: A 5-second test mode is available for initial setup and aiming. In this mode, the light will turn on for approximately 5 seconds each time motion is detected, regardless of the set time.
• Funció de la posta de sol a l'alba: The integrated photocell automatically prevents the light from activating during daylight hours, conserving energy. The sensor will only activate the light when ambient light levels fall below a certain threshold.
• Ajust de sensibilitat: Some models may include a sensitivity dial to adjust the range or sensitivity of motion detection. Adjust this to prevent false triggers from small animals or distant objects.

Anulació manual

To keep the light on continuously for a period, you can typically activate the manual override function. This is often done by quickly turning the light switch OFF and then ON within a few seconds. The light will then stay on until the override period expires or the switch is cycled again. Consult the specific instructions that came with your sensor for precise manual override steps.

Manteniment

The Utilitech GYQ27-W motion sensor requires minimal maintenance to ensure long-term performance.

• Neteja: Periodically wipe the sensor lens with a soft, damp cloth to remove dust, dirt, or cobwebs that may obstruct the sensor's viewNo utilitzeu productes de neteja abrasius.
• Inspecció: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure the sensor is still securely positioned.
• Factors ambientals: Keep the area around the sensor clear of obstructions like tree branches or tall shrubs that could block the detection field or cause false triggers due to wind movement.

Resolució de problemes

If your Utilitech GYQ27-W motion sensor is not functioning as expected, refer to the following common issues and solutions:

Especificacions

Garantia i Suport

Information regarding specific warranty terms for the Utilitech GYQ27-W motion sensor is not provided in this manual. For warranty details, technical support, or replacement parts, please refer to the original product packaging or contact Utilitech customer service directly.

You may also visit the official Utilitech website for the most up-to-date information and support resources.