RICOO S5644 Swivel Tilt TV Wall Mount Instruction Manual

Introducció

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your RICOO S5644 Swivel Tilt TV Wall Mount. Please read all instructions carefully before beginning installation and keep this manual for future reference.

Advertència de seguretat:

• No supereu la capacitat màxima de pes de 35 kg (77 lliures).
• Assegureu-vos que l'estructura de la paret pugui suportar amb seguretat el pes combinat del suport i del televisor.
• Always use appropriate tools and follow all safety precautions during installation.
• Si teniu dubtes sobre alguna part de la instal·lació, consulteu un professional qualificat.

Contingut del paquet

Verify that all components are present before starting the installation. If any parts are missing or damaged, contact RICOO customer support.

• TV Wall Mount Assembly (Main Arm and Wall Plate)
• TV Bracket Arms (x2)
• Kit de ferreteria de muntatge (diversos cargols, ancoratges, volanderes, separadors)
• Manual d'instruccions

Note: Specific screw sizes and types will vary based on your TV and wall type. Refer to the hardware kit for details.

Configuració i instal·lació

Before installation, ensure your TV's VESA pattern and weight are compatible with the RICOO S5644 mount. This mount supports VESA patterns up to 400x400mm and TVs weighing up to 35 kg (77 lbs).

Step 1: Check VESA Compatibility

Locate the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between these holes. This is your TV's VESA pattern. The S5644 supports VESA patterns including 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, and 400x400mm.

Image 1: VESA Compatibility. This image illustrates the range of TV sizes (40-65 inches) and VESA mounting patterns (200x200mm to 400x400mm) supported by the wall mount. Ensure your TV's VESA pattern matches one of the listed options.

Image 2: Maximum Weight Capacity. This image highlights the maximum weight capacity of the RICOO S5644 wall mount, which is 35 kg. Do not exceed this weight limit to ensure safe operation.

Pas 2: connecteu els suports del televisor al televisor

1. Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta per evitar que es facin malbé la pantalla.
2. Attach the two TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.

Image 3: Attaching TV Brackets. This image demonstrates how to attach the two vertical bracket arms to the VESA mounting points on the back of your television. Ensure the arrows on the brackets point upwards and they are securely fastened.

Pas 3: Muntar la placa de paret a la paret

1. Determine the desired height for your TV. Use a stud finder to locate wall studs if mounting on a wood stud wall. For concrete or brick walls, use appropriate anchors.
2. Hold the wall plate against the wall at the desired height and mark the drilling locations.
3. Drill pilot holes according to the recommended drill bit size for your wall type.
4. Secure the wall plate to the wall using the provided lag bolts and washers. Ensure it is level and firmly attached.

Step 4: Hang TV on Wall Mount

1. Amb ajuda, aixequeu amb cura el televisor amb els suports adjunts.
2. Hook the TV brackets onto the wall plate.
3. Secure the TV to the wall plate using the safety screws or locking mechanisms provided.

Instruccions de funcionament

The RICOO S5644 wall mount offers various adjustments for optimal viewing.

Image 4: Adjustment Capabilities. This image illustrates the flexible movement options of the mount: 180-degree swivel for wide viewing angles, a tilt range of +5° to -15° to reduce glare, and a ±3° leveling adjustment for perfect screen alignment.

Ajust giratori

Gently push or pull the TV to the desired left or right angle. The mount allows for up to 180 degrees of swivel, depending on TV size and wall distance.

Ajust d'inclinació

To adjust the vertical tilt, loosen the tilt adjustment knobs on the TV brackets, tilt the TV to the desired angle (up to +5°/-15°), and then tighten the knobs securely.

Ajust de nivell

If your TV is not perfectly level after installation, you can adjust it by rotating the TV slightly. The mount allows for a ±3° leveling adjustment. Loosen the leveling screws, adjust, and re-tighten.

Extension and Retraction

The articulated arm allows you to extend the TV away from the wall or retract it closer to the wall for optimal viewdistància.

Manteniment

• Inspecció periòdica: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs.
• Neteja: Netegeu el suport amb un drap suau i sec. Eviteu netejadors o dissolvents abrasius.
• Lubricació: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact customer support.

Resolució de problemes

Problema: El televisor no està anivellat.

Solució: Use the level adjustment feature. Loosen the leveling screws on the TV brackets, adjust the TV to be level, and then re-tighten the screws.

Problem: Mount feels loose or unstable.

Solució: Immediately remove the TV from the mount. Re-check all wall mounting screws and TV bracket screws to ensure they are securely tightened. Verify that the wall structure is adequate for the weight. If issues persist, consult a professional installer.

Problem: Difficulty adjusting swivel or tilt.

Solució: Ensure no cables are obstructing movement. For tilt, loosen the tilt adjustment knobs before attempting to adjust, then re-tighten. Do not force movement.

Especificacions

Image 5: Technical Dimensions. This detailed technical drawing provides all critical dimensions of the RICOO S5644 wall mount in millimeters, including its extension range (55-515mm), height (292mm), and the precise VESA mounting points, tilt, and swivel capabilities.

Garantia i Suport

RICOO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official RICOO weblloc.

For further assistance, please contact RICOO customer service:

• Weblloc: www.ricoo.eu (Example, actual link not provided in JSON)
• Correu electrònic: support@ricoo.eu (Example)

Si us plau, tingueu a mà el número de model (S5644) i la data de compra quan us poseu en contacte amb el servei d'assistència.