Philips SWV2175H/37

Philips RG6 Dual Shield Coaxial Cable (SWV2175H/37)

Manual d'instruccions

Model: SWV2175H/37 | Brand: Philips

Introducció

The Philips RG6 Dual Shield Coaxial Cable is designed to provide a clear audio and video connection for your home entertainment system. This 25-foot (7.6 meter) cable connects any two video components equipped with 'F' type jacks, such as TVs, HDTVs, cable or antenna boxes, satellite receivers, and DVRs. It features double shield coax protection to minimize signal loss and interference, ensuring high-quality signal transfer up to 3 GHz.

This cable is intended for indoor use only and should not be used outdoors or for in-wall installations. It requires no hardwiring or permanent installation, offering a simple and reliable connection solution.

Instruccions de configuració

Follow these steps to properly connect your Philips RG6 Coaxial Cable:

  1. Identify F-Type Jacks: Locate the 'F' type coaxial jacks on the back of the two video components you wish to connect (e.g., TV and cable box). These jacks are typically threaded.
  2. Connecta el primer extrem: Take one end of the Philips RG6 Coaxial Cable. Carefully align the F-type connector with the 'F' type jack on your first component. Screw the connector onto the jack clockwise until it is finger-tight. Do not overtighten.
  3. Connecta el segon extrem: Take the other end of the coaxial cable. Align its F-type connector with the 'F' type jack on your second component. Screw the connector onto the jack clockwise until it is finger-tight.
  4. Connexió segura: Ensure both connections are secure to prevent signal loss or interference.

Nota important: This cable is designed for indoor use only. Do not install this cable outdoors or inside walls.

Close-up of the Philips RG6 Coaxial Cable connected to an F-type jack on a device, illustrating a secure connection for optimum signal.

Image: Philips RG6 Coaxial Cable connected to a device.

Instruccions de funcionament

Once the Philips RG6 Coaxial Cable is securely connected between your devices, it will automatically transmit audio and video signals. No further operation is required for the cable itself.

  • Qualitat del senyal: The double-shielded design helps maintain optimal signal quality for clear audio and video.
  • Compatibilitat: This cable is compatible with all F-type jack devices, including various models of TVs, satellite receivers, cable boxes, and DVRs.
Philips RG6 Coaxial Cable connecting a television to a media console in a modern living room setup.

Image: Philips RG6 Coaxial Cable integrated into a home entertainment system.

Manteniment

To ensure the longevity and optimal performance of your Philips RG6 Coaxial Cable, consider the following maintenance tips:

  • Mantingueu els connectors nets: Periodically check the F-type connectors for dust or debris. Clean gently with a dry, soft cloth if necessary.
  • Eviteu doblegar-vos: Do not sharply bend or crimp the cable, as this can damage the internal shielding and affect signal quality.
  • Només per a ús interior: As specified, this cable is for indoor use. Exposure to outdoor elements can degrade the cable and its performance.
  • Col·locació segura: Ensure the cable is not in a high-traffic area where it could be stepped on or damaged.

Resolució de problemes

If you experience issues with your audio or video signal, consider the following troubleshooting steps:

  • No Signal or Poor Picture/Sound:
    • Comproveu les connexions: Ensure both F-type connectors are securely screwed onto their respective jacks. A loose connection is a common cause of signal issues.
    • Inspeccionar el cable: Visually inspect the entire length of the cable for any visible damage, kinks, or cuts. A damaged cable may need to be replaced.
    • Prova amb un altre cable: If possible, try connecting your devices with a different, known-working coaxial cable to determine if the issue lies with the cable or the connected devices.
  • Interferència o estàtica:
    • Relocate Cable: Move the coaxial cable away from other electronic devices or power cords that might be causing electromagnetic interference.
    • Check Shielding: The Philips RG6 cable features double shielding. If interference persists, ensure the connectors are fully tightened to maximize the shielding effectiveness.

Especificacions

CaracterísticaDetall
Número de modelSWV2175H/37
MarcaPhilips
Tipus de cableRG6 Coaxial
Longitud25 peus (7.6 metres)
Tipus de connectorF-Type (Male-to-Male)
Suport de freqüènciaFins a 3 GHz
Velocitat de transferència de dades3 gigabits per segon
BlindatgeDual Shield
ConnectorsCorrosion-resistant compression connectors
Entorn d'úsNomés per a ús interior
ColorBlanc
Philips RG6 Dual Shield Coaxial Cable, 25 ft. length, white color, with F-type connectors and 3GHz digital capability indicated.

Image: Philips RG6 Dual Shield Coaxial Cable.

Producte acabatview Vídeo

Vídeo: Un overview of the Philips Coaxial Cable, highlighting its features and compatibility.

Garantia

The Philips RG6 Dual Shield Coaxial Cable is backed by a Garantia limitada de per vida. For specific terms and conditions of the warranty, please refer to the product packaging or contact Philips customer support.

Suport

For technical assistance or any questions regarding your Philips RG6 Dual Shield Coaxial Cable, free U.S. based technical support is available. Please visit the official Philips website for contact information and further resources.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.