1. Introducció
Thank you for choosing the SCSETC S-1 Motorcycle Helmet Bluetooth Headset. This device is designed to provide clear and reliable wireless communication for motorcyclists and passengers. It allows for hands-free calls, music playback, GPS voice instructions, and intercom communication with other riders. The S-1 features advanced Bluetooth 4.1 technology, CVC 6.0 noise reduction, and a waterproof design for an enhanced riding experience.
Please read this manual carefully before using the product to ensure proper operation and to maximize your enjoyment of its features.
2. Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:
- 1 x SCSETC S-1 Helmet Bluetooth Headset (Main Unit)
- 1 x Casc Clamp Group (includes speakers, microphone, adhesive accessories)
- 1 x Double-Lock Push Button
- 1 x MicroUSB Data Charging Cable
- 1 cable d'àudio de 2.5 mm a 3.5 mm
- 1 x Manual d'instal·lació
- 1 x Manual d'usuari (aquest document)
Image: All components included in the SCSETC S-1 Helmet Bluetooth Headset package, laid out clearly.
3. Configuració
3.1 Càrrega del dispositiu
Before first use, fully charge the headset. Connect the MicroUSB charging cable to the headset's charging port and the other end to a USB power adapter (not included) or a computer's USB port. The indicator light will show charging status and turn off when fully charged. A full charge typically takes approximately 2 hours.
Image: The SCSETC S-1 headset illustrating its battery performance with 2 hours fast charging, 18 hours of Bluetooth interphone usage, and 160 hours of standby time.
3.2 Instal·lació dels auriculars al casc
The SCSETC S-1 can be mounted to most motorcycle helmets. There are two primary methods for installation: using the clamp or using adhesive.
- Clamp Instal·lació:
- Loosen the screws on the helmet clamp.
- Feu lliscar el clamp between the outer shell and the inner padding of your helmet, positioning it on the left side.
- Tighten the screws to secure the clamp fermament.
- Slide the main headset unit onto the clamp fins que encaixi al seu lloc.
- Instal·lació d'adhesius:
- Clean the desired mounting area on the left side of your helmet.
- Peel off the protective film from the adhesive mount.
- Firmly press the adhesive mount onto the helmet surface for at least 30 seconds. Allow it to cure for 24 hours before attaching the main unit.
- Slide the main headset unit onto the adhesive mount until it clicks into place.
- Speaker and Microphone Placement:
- Attach the speakers to the inside of the helmet using the provided adhesive pads, ensuring they are aligned with your ears.
- Position the microphone in front of your mouth, ensuring it is close enough for clear voice pickup but not obstructing your vision.
- Passeu tots els cables amb cura sota l'encoixinat del casc per evitar interferències i garantir la comoditat.
Image: The SCSETC S-1 Helmet Bluetooth Headset mounted on a helmet, highlighting its compact design and integrated controls.
3.3 Pairing with Your Mobile Phone
To use the headset with your mobile phone, you must first pair them:
- Assegureu-vos que els auriculars estan apagats.
- Press and hold the Power/Intercom button for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
- Al telèfon mòbil, activa el Bluetooth i cerca dispositius nous.
- Select "SCS ETC S-1" from the list of available devices.
- If prompted, enter the PIN code "0000".
- Once paired, the LED indicator will flash blue slowly. You will hear a confirmation tone.
4. Instruccions de funcionament
4.1 Encès/Apagat
- Encès: Press and hold the Power/Intercom button for 3 seconds until you hear a tone and the blue LED flashes.
- Apagar: Press and hold the Power/Intercom button for 5 seconds until you hear a tone and the red LED flashes before turning off.
4.2 Control de volum
Use the Volume Up (+) and Volume Down (-) buttons to adjust the audio level.
- Pujar el volum: Premeu el botó (+).
- Baixar el volum: Premeu el botó (-).
4.3 Funcions del telèfon
- Respon a la trucada: Press the Power/Intercom button once.
- Rebutja la trucada: Press and hold the Power/Intercom button for 2 seconds.
- Finalitzar la trucada: Press the Power/Intercom button once.
- Torna a marcar l'últim número: Double-press the Power/Intercom button.
- Assistent de veu (Siri/Assistent de Google): Press the Power/Intercom button three times.
4.4 Reproducció de música
- Reproduir/pausa: Press the Power/Intercom button once.
- Pista següent: Press the (+) button for 2 seconds.
- Pista anterior: Press the (-) button for 2 seconds.
4.5 Comunicació per intercomunicador
The S-1 supports one-to-one intercom up to 500m and group intercom for up to 6 riders.
- Initiate Intercom (One-to-One): With both units powered on, short press the Power/Intercom button on one unit to connect to the other.
- Finalitzar l'intercomunicador: Short press the Power/Intercom button again.
- Intercomunicador de grup: Follow the specific pairing instructions in the separate 'Installation Manual' for multi-unit pairing. Once paired, a short press of the Power/Intercom button will initiate the group conversation.
Image: An illustration depicting 4-6 riders maintaining connection through a group intercom system while riding on a racetrack.
4.6 Ràdio FM
The S-1 includes an FM radio function.
- Activar/desactivar la ràdio FM: Press the 'M' button (often combined with another function, refer to specific button layout on your device).
- Escaneja canals: Press the (+) or (-) button briefly to change stations.
Image: The multifunction headset highlighting its various capabilities including loud volume, noise cancellation, FM radio, telephone connectivity, adapter support, and front/rear seat intercom.
5. Manteniment
5.1 Neteja
To maintain the performance and appearance of your headset:
- Netegeu la unitat principal amb un suau, damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Assegureu-vos que la tapa del port de càrrega estigui ben tancada per evitar l'entrada de pols i humitat.
5.2 Resistència a l'aigua
The SCSETC S-1 is designed with IPX6 water resistance, meaning it is protected against high-pressure water jets from any direction. It is suitable for use in rainy conditions but should not be submerged in water.
Image: The SCSETC S-1 headset shown in a rainy environment, illustrating its IPX6 waterproof capability.
5.3 Emmagatzematge
When not in use for extended periods, store the headset in a cool, dry place. It is recommended to charge the battery at least once every three months to maintain battery health.
6. Solució De Problemes
If you encounter issues with your SCSETC S-1 headset, please refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Bateria baixa; dispositiu bloquejat. | Charge the device fully. If unresponsive, try a soft reset by holding the power button for 10 seconds. |
| No hi ha so dels altaveus. | Volume too low; speakers disconnected; incorrect audio source. | Increase volume. Check speaker connections. Ensure correct mode (music, intercom, phone). |
| No es pot emparellar amb el telèfon/intercomunicador. | El dispositiu no està en mode d'emparellament; Bluetooth desactivat al telèfon; massa dispositius emparellats. | Ensure headset is in pairing mode (red/blue flashing). Turn phone Bluetooth off/on. Clear previous pairings on both devices and try again. |
| Intercom connection unstable or short range. | Obstructions; out of range; interference. | Ensure line of sight between units. Reduce distance between riders. Avoid areas with strong electromagnetic interference. |
| Poor audio quality / excessive noise. | Microphone position; wind noise; CVC not active. | Adjust microphone closer to mouth. Ensure helmet is properly sealed. The CVC 6.0 noise reduction is automatic, but extreme wind may still affect quality. |
| Physical button malfunction. | Wear and tear; manufacturing defect. | If a button breaks or becomes unresponsive, contact customer support for assistance. |
Image: The SCSETC S-1 headset demonstrating its CVC Intelligent Noise Reduction technology, with visual representations of sound waves before and after noise reduction, effective up to 100-120 km/h.
7. Especificacions
| Característica | Especificació |
|---|---|
| Model | S-1 |
| Marca | SCSETC |
| Tecnologia de connectivitat | Sense fil (Bluetooth) |
| Tecnologia de comunicació sense fils | Bluetooth 4.1 |
| Control de soroll | Cancel·lació activa de soroll (CVC 6.0) |
| Intercom Range (One-to-One) | Up to 500 meters (in open area) |
| Group Intercom Support | Fins a 6 genets |
| Capacitat de la bateria | 600 mAh Polymer Battery |
| Temps de conversa | Fins a 22 hores |
| Temps de Música | Fins a 13 hores |
| Temps d'espera | Fins a 160 hores |
| Temps de càrrega | Aprox. 2 hores |
| Nivell de resistència a l'aigua | IPX6 (resistent a l'aigua) |
| Material | Plàstic |
| Conector d'auriculars | 3.5 mm jack (for audio cable) |
| UPC | 713145645066 |
| ASIN | B07F1WQZ5L |
8. Garantia i Suport
The SCSETC S-1 Helmet Bluetooth Headset comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Contact information can typically be found on the product packaging or the manufacturer's official weblloc.