Dorman 55034

Manual d'instruccions del vidre del retrovisor de la porta del costat del passatger Dorman 55034

For Chevrolet Cruze and Cruze Limited Models

1. Producte acabatview

This manual provides instructions for the installation and maintenance of the Dorman 55034 Passenger Side Door Mirror Glass. This product is designed as a direct replacement for the original mirror glass on specific Chevrolet vehicles, ensuring a precise fit and function.

Dorman 55034 Passenger Side Door Mirror Glass

Imatge 1.1: Frontal view of the Dorman 55034 passenger side door mirror glass.

2. Precaucions de seguretat

  • Sempre utilitzeu l'equip de protecció individual adequat, com ara ulleres i guants de seguretat, durant la instal·lació.
  • Handle the mirror glass with care to prevent breakage and injury.
  • Ensure the vehicle is parked on a level surface with the engine off and parking brake engaged before beginning work.
  • Si no esteu segurs de cap pas, consulteu un tècnic d'automoció qualificat.

3. Contingut del paquet

The Dorman 55034 package includes:

  • 1 x Dorman 55034 Passenger Side Door Mirror Glass

4. Compatibilitat del vehicle

This door mirror glass is compatible with the passenger side of the following Chevrolet models:

  • Chevrolet Cruze: 2011, 2012, 2013, 2014, 2015, 2016
  • Chevrolet Cruze Limited: 2016

To ensure precise fitment for your vehicle, it is recommended to verify compatibility using your vehicle's make, model, and trim level.

5. Guia d'instal·lació

5.1. Eines necessàries

  • Guants de protecció
  • Ulleres de seguretat
  • Plastic pry tool (optional, for careful removal)

5.2. Instal·lació pas a pas

Follow these steps to replace your existing passenger side door mirror glass:

  1. Preparar el vehicle: Ensure the vehicle is off and the parking brake is engaged.
  2. Remove Existing Mirror Glass:
    • Carefully position the existing mirror glass to expose the edges.
    • Using a plastic pry tool or your fingers, gently pry the old mirror glass away from the mirror housing. Start from the outer edges and work your way around. Be cautious as the glass may break.
    • Once the glass is loose, disconnect any electrical connectors (e.g., for heating elements) attached to the back of the mirror glass.
  3. Inspect Mirror Housing: Clean any debris from the mirror housing and inspect the mounting clips or motor assembly for damage.
  4. Connect New Mirror Glass:
    • Connect any electrical connectors from the vehicle's wiring harness to the corresponding terminals on the back of the new Dorman 55034 mirror glass.
    Back of Dorman 55034 mirror glass showing mounting clips and electrical terminals

    Imatge 5.1: posterior view of the Dorman 55034 mirror glass, highlighting mounting points and electrical connections.

  5. Install New Mirror Glass:
    • Align the new mirror glass with the mirror housing.
    • Apply even pressure to the center of the mirror glass until it snaps securely into place. Ensure all mounting clips are engaged.
  6. Funcionalitat de prova: Turn on the vehicle and test the mirror's adjustment (if power-adjustable) and heating function (if applicable) to ensure proper operation.
Davant view of Dorman 55034 mirror glass with 'Objects in mirror are closer than they appear' text

Imatge 5.2: Frontal view of the installed mirror glass, displaying the standard safety warning.

6. Funcionament i ús

The Dorman 55034 mirror glass functions as a standard passenger side exterior mirror. It provides a clear reflection for safe driving. As with all convex passenger side mirrors, objects viewed in the mirror are closer than they appear. Always exercise caution and perform head checks when changing lanes or maneuvering.

7. Cura i Manteniment

  • Neteja: Clean the mirror surface with a soft cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that may damage the mirror coating.
  • Inspecció: Periodically inspect the mirror glass for cracks, chips, or looseness. Replace immediately if damage is observed to maintain visibility and safety.

8. Solució De Problemes

  • Mirror is loose after installation: Ensure all mounting clips are fully engaged. Re-apply pressure to the center of the mirror until it clicks into place.
  • Power adjustment or heating not working: Verify that all electrical connectors are securely attached. Check vehicle fuses related to mirror functions.
  • Distorsionat view: Confirm that the correct mirror glass (Dorman 55034) was installed and that it is designed for the passenger side, which typically features a convex lens.

9. Especificacions del producte

CaracterísticaEspecificació
MarcaDorman
Número de model55034
Posició de peces d'automòbilLeft (Passenger Side)
Dimensions de l'article (L x A x A)10 x 7 x 2 polzades
Pes de l'article7.36 unces
Tipus de muntatgeMuntatge de la porta
Descripció de la curvatura de la lentConvex
Tipus d'ajustAjust específic del vehicle
Número de peça OEM30248; 95215097

10. Garantia i atenció al client

Dorman products are manufactured to high-quality standards. For specific warranty information and terms, please refer to the official Dorman website or contact Dorman customer support directly. Keep your purchase receipt for warranty claims.

For further assistance or technical support, please visit the official Dorman weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Oficial de Dorman Weblloc: www.dormanproducts.com

© 2023 Dorman Products. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.