Naviforce NF9050 Analog-Digital Watch Instruction Manual

Introducció

This manual provides detailed instructions for the Naviforce NF9050 Analog-Digital Silver Dial Men's Watch. Please read carefully to understand its features, setup, operation, and maintenance to ensure proper use and longevity of your timepiece.

Característiques del producte

• Moviment: Japanese quartz movement with both analog and digital displays for precise and accurate timekeeping.
• Visualització: Features day, date, and time display.
• Multifuncionalitat: Includes alarm, stopwatch (1/100 chronograph), snooze, hourly chime, and auto date.
• Il·luminació: Stable LED display with EL backlight and luminous hands/hour markers for visibility in low light conditions.
• Temps dual: Capability to display two different time zones simultaneously.
• Durabilitat: Equipped with a plating wear-resistant stainless steel case and high transparent mineral glass for scratch resistance.
• Banda: Flexible stainless steel watch band with a secure push-button clasp closure.
• Resistència a l'aigua: Water resistant to 3 ATM (30 meters), suitable for daily use such as hand washing, rain, or splashes. Not recommended for swimming, diving, or showering.

Components del rellotge

Familiarize yourself with the main components of your Naviforce NF9050 watch:

Imatge 1: Davant view of the Naviforce NF9050 watch, showing the silver dial, analog hands, digital display, and control buttons on the side.

• Corona (A): S'utilitza per configurar l'hora analògica.
• Button B (Top Left): Typically used for mode selection or backlight.
• Botó C (a baix a l'esquerra): Often used for adjusting settings or changing display.
• Button D (Top Right): Commonly used for starting/stopping functions (e.g., stopwatch) or confirming settings.
• Button E (Bottom Right): Often used for resetting functions or advancing settings.
• Pantalla digital: Shows digital time, date, and other functions.
• Agulles analògiques: Hour, minute, and second hands for analog time display.

Imatge 2: Enrere view of the Naviforce NF9050 watch, displaying the stainless steel caseback with brand engravings and model information.

Configuració

1. Configuració de l'hora analògica

1. Pull out the crown (A) to the first click position.
2. Gireu la corona per ajustar les agulles de les hores i els minuts a l'hora desitjada.
3. Push the crown back into its normal position to start the analog time.

2. Configuració de la data i l'hora digitals

1. Press Button B repeatedly to cycle through modes until the digital time display starts flashing (usually the seconds).
2. Press Button C to select the item you wish to adjust (seconds, hour, minute, month, date, day).
3. Press Button D to increase the selected value. Hold Button D for faster adjustment.
4. Once all settings are correct, press Button B to exit the setting mode.

3. Activació de la bateria

Your watch comes with two Lithium Ion batteries pre-installed. If the watch is not running, ensure any plastic battery stopper (if present) has been removed. If the watch still does not function, the battery may need replacement.

Instruccions de funcionament

1. Selecció de mode

Press Button B to cycle through the different digital modes: Time Display, Alarm, Stopwatch, and Dual Time.

2. EL Retroil·luminació

In any mode, press Button B (or a dedicated backlight button if present, typically top-left) to illuminate the digital display for a few seconds.

3. Funció d'alarma

1. Navigate to the Alarm mode by pressing Button B.
2. Press Button C to select the hour or minute to set.
3. Press Button D to adjust the selected value.
4. Press Button B to confirm and exit.
5. To activate/deactivate the alarm, press Button D while in Alarm mode. An alarm icon will appear/disappear.

4. Stopwatch (Chronograph)

1. Navigate to the Stopwatch mode by pressing Button B.
2. Press Button D to start the stopwatch.
3. Press Button D again to stop the stopwatch.
4. Press Button E to reset the stopwatch to zero.
5. For split time, press Button E while the stopwatch is running to display the split time. Press Button E again to return to running time.

5. Dual Time Display

1. Navigate to the Dual Time mode by pressing Button B.
2. Press Button C to select the hour or minute to set for the second time zone.
3. Press Button D to adjust the selected value.
4. Press Button B to confirm and exit.

Manteniment

• Neteja: Netegeu la caixa i la corretja del rellotge regularment amb un drap suau i sec. Per a la brutícia resistent, netegeu lleugerament.amp es pot utilitzar un drap i, a continuació, assecar-lo.
• Resistència a l'aigua: While the watch is water resistant to 3 ATM, avoid exposing it to hot water, steam, or direct high-pressure water jets. Do not operate buttons underwater. Ensure the crown is fully pushed in at all times.
• Substitució de la bateria: When the digital display dims or the watch stops, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
• Emmagatzematge: Store your watch in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields.
• Productes químics: Avoid contact with solvents, detergents, perfumes, and cosmetics, as these can damage the watch case, band, or seals.

Resolució de problemes

Especificacions

Informació de la garantia

The Naviforce NF9050 watch comes with a Garantia del fabricant de 1 anys from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear of the case, glass, or band. Please retain your proof of purchase for warranty claims.

Suport

For further assistance, technical support, or warranty claims, please contact Naviforce customer service through their official website or the retailer where the watch was purchased. Provide your model number (NF9050) and proof of purchase for efficient service.

You can visit the official Naviforce store for more information: Naviforce Store