1. Producte acabatview
The DIYmall DS3218 is a high-performance digital servo designed for various remote-controlled (RC) applications, including RC cars and DIY models. It features a robust metal gear construction, high torque output, and a 270-degree rotation capability. This servo is engineered for durability and reliable operation in demanding environments.
Característiques principals:
- Alt parell motor: Provides 20kg-cm (at 5V) to 21.5kg-cm (at 6.8V) stall torque.
- Wide Rotation Angle: Offers a 270-degree controllable rotation range.
- Metal Gear: Equipped with durable metal gears for enhanced longevity and strength.
- Resistent a l'aigua: Designed to be water-resistant (IP66 rated), suitable for use in damp conditions, but not for submersion underwater.
- Control digital: Utilizes Pulse Width Modulation (PWM) for precise control.
- Vol. Operatiutage: Compatible with 4.8V to 6.8V DC power sources.
2. Què hi ha a la caixa
Each package of the DS3218 Digital Servo typically includes the following components:
- DS3218MG Digital Servo
- 25T Servo Arm
- Cargols i accessoris de muntatge
Image: The DS3218 Digital Servo shown with its standard accessories, including various servo horns and mounting hardware.
Vídeo: Un unboxing i mésview of the DIYmall DS3218 Metal Gear Digital Servo, showcasing the servo unit and its accompanying accessories.
3. Especificacions
Detailed technical specifications for the DS3218 Digital Servo are provided below:
Image: Comprehensive table detailing environmental, mechanical, electrical, and control specifications of the DS3218 servo.
| Categoria | Item | Especificació |
|---|---|---|
| Condició ambiental | Interval de temperatura d'emmagatzematge | -30 °C ~ 80 °C |
| Interval de temperatura de funcionament | -15 °C ~ 70 °C | |
| Vol. Operatiutage Rang | 4.8 V ~ 6.8 V CC | |
| Característiques mecàniques | Mida | 40 x 20 x 40.5 mm |
| Pes | 60 g | |
| Relació de transmissió | 275 | |
| Coixinet | Double bearing | |
| Cable connector | 300 ± 5 mm | |
| Motor | 3 pol | |
| Rendiment impermeable | IP66 | |
| Característiques elèctriques | Vol. Operatiutage | 5V / 6.8V |
| Idle Current (at stopped) | 4mA (5V) / 5mA (6.8V) | |
| Operating Speed (at no load) | 0.16 sec/60° (5V) / 0.14 sec/60° (6.8V) | |
| Stall Torque (at locked) | 18 kg-cm (5V) / 21.5 kg-cm (6.8V) | |
| Especificació de control | Sistema de control | PWM (modulació d'amplada de pols) |
| Interval d'amplada de pols | 500 ~ 2500 µsec | |
| Neutral Point | 1500 µs | |
| Running Degree | 270° (when 500 ~ 2500 µsec) | |
| Dead Band Width | 3 µs | |
| Freqüència de funcionament | 50-330 Hz |
Image: Detailed diagram showing the physical dimensions of the DS3218 servo and its various servo horns.
4. Configuració i connexió
Follow these steps to properly set up and connect your DS3218 Digital Servo:
- Muntatge: Secure the servo in your RC model or DIY project using the provided mounting screws. Ensure it is firmly attached to prevent movement during operation.
- Attach Servo Arm: Select the appropriate 25T servo arm for your application and attach it to the servo's output shaft.
- Cablejat: Connect the servo's three-wire cable to your receiver or microcontroller. The wire color coding is standard:
- Filferro blanc: Signal (PWM input)
- Fil vermell: Positive power supply (+)
- Fil negre: Terra (-)
- Font d'alimentació: Assegureu-vos que la vostra font d'alimentació proporcioni un volum establetage within the 4.8V to 6.8V DC range. Connecting the servo to an incorrect voltage pot causar danys.
Image: A typical connection diagram showing how to connect the DS3218 servo to an Arduino board, illustrating signal, power, and ground connections.
Image: The DS3218 servo highlighting the wire colors and their corresponding functions (Signal, +, -).
5. Instruccions de funcionament
The DS3218 Digital Servo operates based on Pulse Width Modulation (PWM) signals. The pulse width determines the servo's position within its 270-degree range.
- Interval de control: The servo responds to PWM signals typically ranging from 500 µsec to 2500 µsec.
- Posició neutral: A pulse width of approximately 1500 µsec will typically set the servo to its neutral (center) position.
- Rotació: Pulse widths below 1500 µsec will rotate the servo in one direction (e.g., counter-clockwise), while pulse widths above 1500 µsec will rotate it in the opposite direction (e.g., clockwise). The exact rotation direction for specific pulse widths is detailed in the specifications.
- Resistència a l'aigua: The servo is rated IP66 for water resistance, meaning it is protected against powerful water jets. However, it is not designed to operate underwater. Avoid submerging the servo.
Image: Illustration of the DS3218 servo's 270-degree controllable angle, indicating the PWM range required for operation.
Video: Demonstration of the DS3218 High Torque Metal Gear Digital Servo in operation, showcasing its movement and responsiveness when connected to a control board.
6. Manteniment
Proper maintenance ensures the longevity and optimal performance of your DS3218 Digital Servo:
- Mantenir net: Regularly clean the servo's exterior to prevent dust and debris from accumulating, especially around the output shaft and mounting points.
- Eviteu la sobrecàrrega: Do not subject the servo to forces exceeding its specified stall torque. Excessive force can damage the gears or motor.
- Comproveu les connexions: Periodically inspect all wiring connections for looseness or damage. Secure connections are crucial for reliable operation.
- Inspecció d'engranatges: While the gears are metal and durable, inspect them for any signs of wear or damage if the servo's performance degrades.
- Resistència a l'aigua: Although water-resistant, avoid prolonged exposure to moisture and ensure the servo is dry before storage. Do not use it underwater.
Imatge: Una explosió view of the DS3218 servo, labeling key internal components such as the output gear, solid brass gears, and waterproof gaskets, highlighting its robust construction.
7. Solució De Problemes
If you encounter issues with your DS3218 Digital Servo, consider the following troubleshooting steps:
- Servo Not Responding:
- Check power connections: Ensure the red and black wires are correctly connected to the power supply and ground, and that the voltage es troba dins del rang especificat (4.8 V-6.8 V).
- Verify signal connection: Confirm the white signal wire is securely connected to the correct output pin of your receiver or microcontroller.
- Test with a different signal source: If possible, try connecting the servo to a known working signal source (e.g., a servo tester) to rule out issues with your control system.
- Erratic Movement or Jitter:
- Power supply issues: Insufficient current or voltage fluctuations can cause erratic behavior. Ensure your power supply can deliver adequate current for the servo, especially under load.
- Signal interference: Check for sources of electrical interference near the servo or its wiring.
- Dead band width: The servo has a 3 µsec dead band. If your control signal is very noisy or fluctuates within this range, it might cause minor jitter.
- Servo Overheating:
- Excessive load: The servo may be under too much mechanical load. Reduce the load or consider a servo with higher torque capacity.
- Continuous stall: Avoid situations where the servo is continuously stalled against an obstacle, as this will cause rapid heat buildup.
- Soroll durant el funcionament:
- Normal operation: Digital servos can produce a slight humming sound, which is often normal.
- Gear issues: If the noise is excessive or grinding, inspect the metal gears for damage or debris.
8. Garantia i Suport
For warranty information and technical support, please refer to the retailer or the official DIYmall website where you purchased the product. Keep your proof of purchase for any warranty claims.
DIYmall is committed to providing quality products and customer satisfaction. If you have further questions or require assistance beyond this manual, please contact DIYmall customer support.
Fabricant: DIYmall
Número de model: DS3218
