TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Introducció

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet. Si falta algun element o està malmès, poseu-vos en contacte amb el vostre proveïdor.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Adaptador d'alimentació
• Ratolí USB
• Control remot
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Guia d'inici ràpid

Figura 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Informació de seguretat

Si us plau, observeu les següents precaucions de seguretat per evitar lesions o danys al dispositiu:

• Assegureu-vos que la font d'alimentació voltage is correct before connecting the NVR.
• Do not expose the NVR to water or moisture.
• Avoid placing the NVR in direct sunlight or near heat sources.
• Install the NVR in a well-ventilated area to prevent overheating.
• Do not open the NVR casing. Demaneu totes les tasques de manteniment a personal qualificat.
• Utilitzeu només accessoris especificats pel fabricant.

3. Producte acabatview

NVR Front and Rear Panels

Figura 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Front Panel Indicators and Controls:

• POTÈNCIA: Indicador de potència.
• ESTAT: Indicador d'estat del sistema.
• Tx/Rx: Data transmission/reception indicator.
• Botons de control: For menu navigation and system control.
• Port USB: For mouse or USB storage device connection.

Rear Panel Interfaces:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• ENTRADA/SORTIDA D'ÀUDIO: Per a dispositius d'àudio externs.
• Port LAN: Connect to your network router/switch.
• Sortida HDMI: Connect to a monitor for high-resolution video output (up to 4K).
• Sortida VGA: Connect to a monitor for video output (up to 1080p).
• Power Input (48V): Connecteu l'adaptador de corrent proporcionat.
• Interruptor d'alimentació: To turn the NVR on/off.

Característiques clau

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Suport en directe view, storage, and playback of connected cameras.

4. Configuració

4.1 Instal·lació del disc dur (opcional)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Desenrosqueu i traieu la coberta superior de l'NVR.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Fixeu el disc dur al xassís de l'NVR amb els cargols proporcionats.
4. Torneu a col·locar la coberta superior i fixeu-la amb cargols.

4.2 Connecting Cameras

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Figura 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Connecteu un monitor al port de sortida HDMI o VGA de l'NVR.
• Connecteu un ratolí USB a un dels ports USB de l'NVR.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewcapacitats d'ingrés.

4.4 Encès

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Instruccions de funcionament

5.1 Assistent de configuració inicial

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Viu View

Després de la configuració inicial, l'NVR mostrarà la imatge en directe view de càmeres connectades. Podeu canviar entre una sola càmera view i una graella multicàmera view using the on-screen controls or the remote control.

5.3 Enregistrament

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Reproducció

Accés gravat footage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Network Access and Remote Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Manteniment

6.1 Gestió del disc dur

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 actualitzacions de microprogramari

Comproveu el del fabricant website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Neteja

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Solució De Problemes

• Sense energia:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Sense sortida de vídeo:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Càmeres que no mostren:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Sense gravació:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Problemes d'accés remot:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web configuració del navegador.

8. Especificacions

9. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.