Vitec MGW Ace Decoder

Vitec MGW Ace Decoder HEVC/H.265 Hardware Decoder User Manual

Model: MGW Ace Decoder

1. Introducció

The Vitec MGW Ace Decoder is a professional-grade, high-performance IP decoding appliance. It supports HEVC/H.265 and H.264/AVC compression standards, offering efficient bandwidth utilization. Designed for field use, this portable device delivers high-quality video through industry-standard audio/video connectivity.

This manual provides essential information for the proper setup, operation, and maintenance of your MGW Ace Decoder.

2. Configuració

2.1 Desembalatge i inspecció

2.2 Dispositiu acabatview i connexions

The Vitec MGW Ace Decoder features various ports and indicators for operation. Refer to the image below for a view of the front panel connections and indicators.

Vitec MGW Ace Decoder front panel with audio talkback, USB, and status LEDs

Figura 1: Front panel of the Vitec MGW Ace Decoder. This view shows the Audio Talkback In/Out 3.5mm jacks, a USB port, and LED indicators for Power, Error, Decode, and HD status, along with a Reset button. The device has a distinctive blue and black casing with ventilation fins.

To set up your decoder:

  1. Connexió d'alimentació: Connect the provided power adapter to the DC input port (typically located on the rear panel) and then to a suitable power outlet.
  2. Connexió de xarxa: Connect an Ethernet cable from your network switch or router to the Ethernet port (typically located on the rear panel) on the decoder.
  3. Sortida de vídeo: Connect an HDMI cable from the decoder's HDMI output port (typically located on the rear panel) to your display device (monitor, TV, projector).
  4. Audio Talkback (Front Panel): For two-way audio communication, connect a microphone or audio input device to the "IN" 3.5mm jack and headphones or an audio output device to the "OUT" 3.5mm jack.
  5. USB (Front Panel): The USB port can be used for firmware updates or connecting external storage devices as needed.

3. Instruccions de funcionament

3.1 Engegada i arrencada inicial

  1. After connecting all necessary cables, plug the power adapter into the electrical outlet.
  2. El PODER LED on the front panel will illuminate green, indicating the device is receiving power.
  3. Allow a few moments for the device to boot up.

3.2 Decoding IP Streams

The MGW Ace Decoder is designed to decode HEVC/H.265 and H.264/AVC IP streams. Configuration is typically performed via a web interfície.

  1. Accés Web Interfície: Obre a web browser and enter the IP address of the MGW Ace Decoder. (Refer to your network configuration or device documentation for the default IP address or how to discover it).
  2. Inici de sessió: Introduïu el vostre nom d'usuari i contrasenya.
  3. Configura el flux: Navigate to the decoding settings. Input the source IP stream URL or parameters.
  4. Start Decoding: Initiate the decoding process through the web interfície. El DECODIFICAR LED on the front panel should illuminate when a stream is actively being decoded.
  5. Estat del monitor: El HD LED indicates if the decoded stream is High Definition. The ERROR LED will illuminate red if a critical error occurs.

3.3 Using Audio Talkback

4. Manteniment

5. Solució De Problemes

ProblemaCausa possibleSolució
Sense alimentació (LED POWER apagat)Power cable disconnected; Power outlet faulty.Comproveu les connexions del cable d'alimentació. Proveu una altra presa de corrent.
Sense sortida de vídeoHDMI cable disconnected; Incorrect input selected on display; No active stream.Verify HDMI cable connection. Select correct input on display. Ensure a stream is configured and decoding.
ERROR LED is redCritical system error; Stream issue.Comproveu web interface for error details. Try restarting the device using the RESET button or power cycle. Verify stream source.
No es pot accedir web interfícieIncorrect IP address; Network issue; Device not fully booted.Verify device IP address. Check network cable connection. Wait for device to fully boot.

If problems persist, contact Vitec technical support.

6. Especificacions

CaracterísticaDetall
ModelMGW Ace Decoder
MarcaVitec
Estàndards de compressióHEVC/H.265, H.264/AVC
Tecnologia de connectivitatHDMI, Ethernet, USB, Audio Talkback (3.5mm)
Pes de l'article3 lliures (aproximadament 1.36 kg)
FabricantVitec
Primera data disponible6 d'agost de 2024

7. Garantia i Suport

For detailed warranty information, please refer to the warranty card included with your product or visit the official Vitec website. Technical support can be accessed through the Vitec support portal or by contacting their customer service department. Please have your product model and serial number ready when seeking support.

Vitec Official Weblloc: www.vitec.com

Documents relacionats - MGW Ace Decoder

Preview VITEC MGW Diamond-Hx OG: 4K HEVC HDMI Encoder Datasheet
Acabat integralview of the VITEC MGW Diamond-Hx OG, a 4K HEVC video encoder card for IPTV, Direct-to-Web, and broadcast applications. Features include multi-channel encoding, low latency, advanced protocols like Zixi and SRT, and HDR support.
Preview MGW Nano Encoder: Portable H.264 Streaming Appliance | VITEC
VITEC MGW Nano Encoder is a portable MPEG-4 H.264 encoding and streaming appliance. Features Full HD processing, HD/SD-SDI and HDMI inputs, KLV/STANAG metadata, Zixi™ and ProMPEG FEC for error-free delivery. Technical specifications and ordering information.
Preview VITEC EZ TV: Plataforma de senyalització digital i IPTV de nivell empresarial
EZ TV de VITEC és una plataforma completa i de nivell empresarial per a la distribució d'IPTV i la senyalització digital. Ofereix transmissió en directe, vídeo a la carta, gestió de continguts i funcions avançades per a diverses indústries, com ara corporatives, de radiodifusió, militars i instal·lacions esportives.
Preview Manual d'usuari de QVidium QVDEC4K: Guia del descodificador de vídeo 4K/UHD HEVC/AVC
Manual d'usuari complet per al QVidium QVDEC4K, un descodificador de vídeo per Internet en temps real 4K/UHD HEVC/AVC d'alt rendiment. Aprèn sobre la configuració, el funcionament, la resolució de problemes i les especificacions tècniques per a aplicacions de vídeo professionals.
Preview Digital Terrestrial Decoder DVB-T2 HD 1080P User Manual
User guide for the DVB-T2 HD 1080P digital terrestrial decoder, covering setup, features like H.265 HEVC, Mini Scart, USB WiFi, PVR, multimedia, and troubleshooting.
Preview Descodificador Bolin EG40DH Dante AV-H: Transmissió de vídeo d'alta qualitat i baixa amplada de banda
Exploreu el Bolin EG40DH, un potent descodificador IP dissenyat per FPGA per a fluxos de vídeo Dante AV-H. Aquest document detalla les seves característiques, especificacions i flux de treball, destacant la seva compatibilitat amb càmeres Dante AV-H, fluxos RTSP i la seva capacitat per oferir vídeo de fins a 4K60 amb àudio integrat a través d'una xarxa estàndard d'1 GB.