Elitech LogEt 8 BLE Bluetooth Wireless Data Logger User Manual

1. Producte acabatview

The Elitech LogEt 8 BLE is a Bluetooth wireless multi-use PDF data logger designed for monitoring temperature in various life science applications. It features a USB port for direct data download and PDF report generation, and Bluetooth connectivity for remote management via the Elitech App.

Característiques principals:

• Tecnologia Bluetooth sense fil: Enables one-click pairing and remote programming/management via the Elitech App within meters.
• Wide Temperature Measuring Range: -22℉ to 158℉ (-30℃ to 70℃) with an accuracy of ±0.9℉ (±0.5℃).
• Compatibilitat amb aplicacions mòbils: Free Elitech App for iOS and Android devices facilitates remote logger management and cold chain monitoring.
• Multi-use Capability: Designed for repeated use over approximately 2 years under room temperature conditions.
• Sincronització automàtica de dades: Automatically uploads all recorded data to your account when connected to the Elitech APP.
• High Recording Capacity: Stores up to 16,000 recording points.

Figura 1: Frontal view of the LogEt 8 BLE data logger with labeled components.

2. Contingut del paquet

Verifiqueu que tots els elements estiguin presents al paquet en desempaquetar-lo:

• 1 x LogEt 8 BLE Data Logger
• 1 x Manual d'usuari
• 1 x certificat de calibratge

Figure 2: Contents included in the LogEt 8 BLE package.

3. Components del dispositiu

Familiarize yourself with the main components of the LogEt 8 BLE data logger:

• Port USB: Located at the top, protected by a removable cap. Used for direct connection to a computer for data download and configuration.
• Pantalla LCD: Displays current temperature, alarm status, recording status, and battery level.
• Botó INICI: Initiates data recording.
• Botó STOP: Halts data recording.
• Embedded Temperature Sensor: Internal sensor for accurate temperature measurement.

4. Configuració

4.1 Configuració inicial

1. Desempaquetar el dispositiu: Carefully remove the LogEt 8 BLE from its packaging.
2. Inspeccionar per danys: Check the device for any visible damage. If damaged, contact customer support.
3. Activació de la bateria: The device comes with a pre-installed lithium metal battery. No initial activation is typically required.

4.2 Software Installation (Elitech App)

To fully utilize the LogEt 8 BLE's features, download the Elitech App on your mobile device:

• Cerca "Elitech" in the Apple App Store (for iOS) or Google Play Store (for Android).
• Download and install the official Elitech App.
• Creeu un compte o inicieu sessió si ja en teniu un.

4.3 Connexió mitjançant Bluetooth

Un cop instal·lada l'aplicació:

1. Assegureu-vos que el Bluetooth estigui habilitat al vostre dispositiu mòbil.
2. Open the Elitech App.
3. The app will scan for nearby Elitech data loggers. Select your LogEt 8 BLE from the list to pair.
4. Follow any on-screen prompts for one-click pairing.

4.4 Programming the Logger

Before starting a recording, configure the logger's parameters using the Elitech App or by connecting directly to a computer via USB:

• Via Elitech App: Within the app, navigate to the settings for your connected LogEt 8 BLE. You can set parameters such as sampling interval, alarm thresholds, start delay, and recording duration.
• Via USB (PC Software): Remove the protective cap to expose the USB port. Connect the logger to a computer. Use the Elitech data management software (downloadable from the Elitech website) to configure settings.

Figure 3: Default parameters sticker on the side of the device.

5. Instruccions de funcionament

5.1 Inici d'una gravació

To begin data logging:

• Manteniu premut el botó COMENÇA button for approximately 3 seconds until the "REC" indicator appears on the LCD screen.
• If a start delay was configured, the logger will begin recording after the specified delay.

5.2 Aturar una gravació

To end data logging:

• Manteniu premut el botó STOP button for approximately 3 seconds until the "END" indicator appears on the LCD screen.
• Alternatively, connect the logger to the Elitech App or PC software and select the option to stop recording.

5.3 Data Download and Report Generation

After recording, data can be retrieved and analyzed:

• Per USB: Remove the USB cap and plug the logger into a computer's USB port. The logger will automatically generate a PDF report and a CSV data file. Aquests files can be accessed directly from the logger's virtual drive.
• Via Elitech App: Connect the logger to the Elitech App via Bluetooth. The app will automatically sync and upload all data to your account. You can then view graphs, export data, or generate reports directly from the app.

Figure 4: LogEt 8 BLE with USB port exposed and key specifications.

6. Manteniment

6.1 Informació sobre la bateria

The LogEt 8 BLE is powered by a non-rechargeable lithium metal battery. The battery is designed to last for approximately 2 years under normal operating conditions. The battery is contained within the equipment and is not user-serviceable. Attempting to replace the battery may damage the device and void the warranty.

6.2 Neteja

Per netejar el dispositiu:

• Netegeu l'exterior amb un drap suau i sec.
• No utilitzeu netejadors abrasius ni dissolvents ni submergiu el dispositiu en aigua.

6.3 Emmagatzematge

When not in use, store the data logger in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Solució De Problemes

If you encounter issues with your LogEt 8 BLE, refer to the following common problems and solutions:

• El dispositiu no s'encén: Check battery level on the LCD. If the battery is depleted, the device may need replacement as the battery is not user-serviceable.
• No es pot connectar per Bluetooth: Ensure Bluetooth is enabled on your mobile device and the Elitech App is open. Make sure the logger is within range. Restart both the logger and your mobile device.
• No data recorded: Verify that recording was properly started (check for "REC" on LCD). Ensure the logger's memory is not full.
• PDF report not generated: Ensure the logger is connected to a computer's USB port correctly. Try a different USB port or computer. Ensure the USB cap is fully removed.
• Lectures inexactes: Ensure the logger's sensor is not obstructed and is placed in an environment suitable for its operating range.

For further assistance, contact Elitech customer support.

8. Especificacions

9. Garantia i Suport

9.1 Informació de la garantia

Elitech products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included in your package or visit the official Elitech website for specific warranty terms and conditions applicable to the LogEt 8 BLE.

9.2 Atenció al client

For technical support, troubleshooting assistance, or warranty claims, please contact Elitech customer service:

• Weblloc: Visita www.elitechus.com for FAQs, software downloads, and contact information.
• Correu electrònic/Telèfon: Refer to the Elitech weblloc web o l'embalatge del producte per obtenir les dades de contacte més actualitzades.