Pureline PL0167 Pool Filter Cartridge User Manual

1. Introducció

This manual provides instructions for the proper installation, operation, and maintenance of the Pureline PL0167 Pool Filter Cartridge. This cartridge is designed as an aftermarket replacement for various pool filter systems, ensuring efficient water filtration for your swimming pool.

Compatibilitat: This filter cartridge is compatible with Hayward Swimclear C200S, CX200XRE, and Unicel C-9442 systems, among others. Always verify the dimensions and model numbers for proper fit.

Image 1.1: Pureline PL0167 filter cartridge shown with a compatible Hayward SwimClear C200S filter housing.

2. Característiques del producte

• Filtració eficient: Designed for maximum water flow to extend the pool cartridge life.
• Optimized Dirt Distribution: Engineered for even dirt distribution, leading to increased water flow and reduced wear on the pump, thereby lowering energy usage.
• Construcció duradora: Built to withstand regular use and cleaning cycles.
• Dimensions: 28 1/8" L x 10 1/4" D.
• Alternate Part Numbers: Compatible with C-9442, CS200E, CX200XRE, FC-1267, PA200S, APCC7713, C9442, PA200S-EC, PLFPA200S, SD-01334.

Image 2.1: Pureline PL0167 filter cartridge and packaging highlighting its specifications.

3. Configuració i instal·lació

Before beginning installation, ensure your pool pump system is turned off and depressurized. Refer to your pool filter system's specific manual for detailed instructions on opening the filter housing.

1. Apagueu l'alimentació: Disconnect all power to the pool pump and filter system at the circuit breaker.
2. Sistema de despressurització: Open the air relief valve on top of your filter tank to release any pressure.
3. Drenar el dipòsit del filtre: Open the drain plug at the bottom of the filter tank to allow water to drain.
4. Obrir la carcassa del filtre: Follow your filter system's manufacturer instructions to open the filter housing and remove the old cartridge.
5. Inspeccionar i netejar: Inspect the filter tank interior for debris and clean as necessary. Check the manifold and O-rings for wear or damage. Replace any damaged components.
6. Instal·leu un cartutx nou: Carefully place the new Pureline PL0167 filter cartridge into the filter tank. Ensure it is seated correctly.
7. Secure Filter Housing: Close and secure the filter housing according to your system's manufacturer instructions. Ensure the O-ring is properly seated and lubricated.
8. Prime Pump and Restart: Close the drain plug and air relief valve. Turn on the pool pump. Once water begins to flow, open the air relief valve briefly to release trapped air, then close it once a steady stream of water emerges.

Image 3.1: Dimensional diagram of the Pureline PL0167 filter cartridge.

4. Instruccions de funcionament

Once installed, the Pureline PL0167 filter cartridge operates continuously with your pool pump to filter water. Monitor your filter pressure gauge regularly. An increase in pressure indicates that the filter cartridge is collecting debris and requires cleaning.

Maintain proper water chemistry to optimize filter performance and longevity. Refer to your pool's overall operating manual for guidelines on water balance and chemical treatment.

5. Manteniment

Regular cleaning of your Pureline PL0167 filter cartridge is essential for maintaining clear pool water and extending the life of the filter and pump.

5.1. Routine Cleaning (Rinsing)

Rinse the filter cartridge every 2-6 weeks, or when the pressure gauge reads 8-10 PSI above its clean starting pressure.

1. Turn off the pool pump and depressurize the system as described in Section 3.
2. Remove the filter cartridge from the housing.
3. Using a garden hose with a spray nozzle, thoroughly rinse the pleats of the cartridge. Work from top to bottom, ensuring all debris is dislodged.
4. Reinstall the clean cartridge and restart the system.

5.2. Deep Cleaning (Chemical Soak)

A chemical soak is recommended 1-2 times per season, or if the cartridge remains dirty after rinsing, to remove oils, scale, and stubborn debris.

1. After routine rinsing, soak the cartridge in a specialized filter cleaning solution (available at pool supply stores) according to the cleaner's instructions.
2. Alternatively, a solution of muriatic acid (diluted 1 part acid to 10 parts water) can be used for scale, or a strong detergent solution for oils. Always wear protective gear and follow safety instructions when handling chemicals.
3. Rinse the cartridge thoroughly after soaking to remove all chemical residue before reinstalling.

Image 5.1: Visual comparison of a dirty filter (high pressure) versus a clean Pureline filter (normal pressure).

6. Solució De Problemes

7. Especificacions

8. Garantia i Suport

For warranty information or technical support regarding your Pureline PL0167 Pool Filter Cartridge, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

The seller, Inyo Pools, provides extensive resources for pool maintenance. You may find additional helpful guides and articles on their weblloc.