1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your uxcell Cooling Fan, model SF8025AT. Please read this manual thoroughly before using the product and retain it for future reference.
Figure 1: uxcell Cooling Fan SF8025AT (Front View)
2. Informació de seguretat
WARNING: To reduce the risk of electric shock, fire, or injury, read and follow all instructions carefully.
- Assegureu-vos que la font d'alimentació coincideixi amb el volum del ventiladortage (AC 110V/120V).
- No feu funcionar el ventilador amb un cable d'alimentació o un endoll danyats.
- Mantingueu els dits i altres objectes allunyats de les aspes del ventilador durant el funcionament.
- Install the fan in a well-ventilated area.
- Desconnecteu l'alimentació abans de netejar o realitzar qualsevol manteniment.
- This product is designed for specific applications; consult a professional if unsure about compatibility.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- 1 x uxcell Cooling Fan SF8025AT
- (Mounting screws and other accessories may be sold separately or included depending on the specific retail package.)
4. Especificacions
Technical specifications for the uxcell Cooling Fan SF8025AT:
| Característica | Especificació |
|---|---|
| Model | SF8025AT |
| Dimensions (L x A x A) | 80 x 80 x 25 mm (3.15" x 3.15" x 0.98") |
| Distància del forat de muntatge | 73 x 73 mm |
| Voltage | CA 110V/120V |
| Corrent nominal | 0.1A |
| Potència d'entrada | 15.4W |
| Speed (R.P.M.) | 2500 R.P.M. (+/- 10%) |
| Flux d'aire (CFM) | 0.5 CFM màx. |
| Nivell de soroll | 30 dB-A |
| Tipus de rodament | Coixinet de boles dobles |
| Material | Plàstic |
| Pes | 216 g (7.62 oz) |
Figure 2: Fan Dimensions and Mounting Holes
5. Configuració i instal·lació
Follow these steps for proper installation of your cooling fan:
- Preparació: Ensure the device where the fan will be installed is powered off and disconnected from the main power supply.
- Lloc de muntatge: Identify a suitable mounting location that allows for optimal airflow. The fan is designed for 80mm x 80mm mounting points.
- Orientació: Determine the desired airflow direction. Fans typically have an arrow indicating airflow direction on the side frame. Ensure the fan is oriented to draw air in or push air out as required by your system.
- Muntatge segur: Use appropriate screws (not included) to secure the fan to the mounting surface. Ensure the fan is firmly attached to prevent vibration and noise. The mounting hole distance is 73mm x 73mm.
- Connexió d'alimentació: Connect the fan's power cable to an AC 110V/120V power source. This fan typically uses a 2-wire connection for AC power. Ensure connections are secure and insulated.
- Comprovació final: Before restoring power, double-check all connections and ensure no wires are obstructing the fan blades.
Figure 3: uxcell Cooling Fan SF8025AT (Back View)
6. Instruccions de funcionament
Once installed, operating the uxcell Cooling Fan is straightforward:
- Encès: Restore power to the device or system where the fan is installed. The fan should begin operating immediately.
- Verificar el funcionament: Observe the fan to ensure the blades are spinning freely and quietly. Check for proper airflow in the intended direction.
- Funcionament continu: This fan is designed for continuous operation to provide consistent cooling.
7. Manteniment
Un manteniment regular ajuda a garantir un rendiment òptim i una llarga durada del ventilador:
- Neteja: Periodically inspect the fan blades and housing for dust accumulation. Dust can impede airflow and reduce cooling efficiency.
- Eliminació de pols: To clean, first disconnect the fan from its power source. Use a soft brush, compressed air, or a vacuum cleaner with a brush attachment to gently remove dust from the blades and grille. Do not use liquids or harsh chemicals.
- Inspecció: Check for any signs of wear, such as loose wires or damaged blades. If any damage is found, discontinue use and replace the fan.
- Manteniment del coixinet: The dual ball bearings are designed for long-term, maintenance-free operation. No lubrication is typically required.
8. Solució De Problemes
If you encounter issues with your uxcell Cooling Fan, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no gira | No power supply; Loose connection; Damaged fan motor. | Check power source and connections. Ensure voltage matches fan requirements. If connections are secure and power is present, the fan may be faulty and require replacement. |
| El ventilador fa soroll | Dust accumulation; Loose mounting screws; Obstruction; Worn bearings. | Clean fan blades and housing. Tighten mounting screws. Remove any obstructions. If noise persists, bearings may be worn, and the fan may need replacement. (Note: This model has a rated noise level of 30 dB-A, which is audible.) |
| Flux d'aire insuficient | Dust accumulation; Incorrect orientation; Obstruction. | Clean fan blades and grille. Verify fan is oriented correctly for desired airflow. Remove any obstructions in the airflow path. |
9. Garantia i Suport
For warranty information or technical support, please refer to the uxcell official weblloc web o contacteu amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.
Informació de contacte:
- Marca: uxcell
- Weblloc: Visit the uxcell Store on Amazon (per a informació general del producte)