1. Introducció i finalview
The WAC Lighting Aether 2in Round Light Engine Trim & LED is a high-performance recessed downlight designed for various indoor and outdoor applications. Its ultra-low profile design allows for installation in tight plenum spaces. This manual provides essential information for the safe installation, operation, and maintenance of your lighting fixture.
Característiques principals:
- Available in Round, Square, Flangeless Invisible, Adjustable, and Wall Wash configurations.
- Designed for use with New Construction Housings: HR-2LED-H13A or HR-2LED-H13AC.
- Pro ultra baixfile design with a 2.5-inch housing height for 2-inch trims.
- Smooth and continuous dimming capability down to 1% with compatible dimmers (Electronic Low Voltage or 0-10V).
- High-powered, replaceable LED light engine with 2700K color temperature, 90 CRI, and 65,000 rated hours.
2. Informació de seguretat
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.
- ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans d'instal·lar o fer el servei.
- Totes les connexions elèctriques han de complir els codis locals, les ordenances o el Codi Elèctric Nacional (NEC). Consulteu un electricista qualificat si no esteu familiaritzat amb les connexions de cablejat elèctric correctes.
- Assegureu-vos el subministrament voltage és correcta comparant-la amb la informació de l'etiqueta de la lluminària.
- Do not install in areas where the operating temperature exceeds the fixture's rated temperature.
- Do not modify the fixture in any way. Any modifications may void the warranty and create safety hazards.
- Aquest producte ha de ser instal·lat per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Manual d'instruccions
- Light fixture (Aether 2in Round Light Engine Trim & LED)
- Maquinari de muntatge
Image 3.1: WAC Lighting Aether 2in Round Light Engine Trim & LED. This image shows the complete recessed lighting trim with its black and white finish, ready for installation.
4. Configuració i instal·lació
Abans de començar:
- Apagueu l'alimentació a l'interruptor o a la caixa de fusibles.
- Ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.
- Confirm that the compatible new construction housing (HR-2LED-H13A or HR-2LED-H13AC) is already installed.
Instal·lació pas a pas:
- Preparar l'habitatge: Ensure the power to the recessed housing is off. Remove any existing trim or components from the housing.
- Connecteu el cablejat: Locate the wiring connector from the LED light engine. Connect it to the corresponding connector inside the recessed housing. Ensure a secure connection.
- Insert Trim: Carefully push the Aether 2in Round Light Engine Trim into the recessed housing. The spring clips on the trim will engage with the housing to hold it securely in place. Apply gentle, even pressure until the trim is flush with the ceiling surface.
- Retall segur: For some installations, additional mounting hardware may be used to further secure the trim. Refer to the specific instructions provided with your housing for details.
- Restaura l'alimentació: Once the trim is securely installed, restore power at the circuit breaker.
- Funcionalitat de prova: Turn on the light switch to verify proper operation and dimming capabilities.
Image 4.1: Dimensional drawing of the WAC Lighting Aether 2in Round Light Engine Trim. This diagram illustrates the physical measurements of the trim, including its 4 1/8 inch overall diameter and 2 5/8 inch aperture, crucial for proper installation planning.
5. Instruccions de funcionament
Funcionament estàndard:
Once installed and power is restored, the Aether LED trim operates like any standard light fixture. Use your wall switch to turn the light on or off.
Funcionalitat d'atenuació:
This fixture is designed for smooth and continuous dimming down to 1% when used with compatible Electronic Low Voltage (ELV) or 0-10V dimmers. Ensure your dimmer switch is compatible with LED lighting and specifically with ELV or 0-10V systems for optimal performance. Refer to your dimmer's instruction manual for specific operating procedures.
6. Manteniment
The WAC Lighting Aether LED trim requires minimal maintenance.
- Neteja: Per netejar l'aparell, assegureu-vos que l'alimentació estigui apagada. Feu servir un drap suau, sec o lleugerament humit.amp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
- LED Light Engine: The LED light engine is replaceable. If replacement is necessary, ensure power is off and follow the reverse of the installation steps to remove the old engine and install a new, compatible WAC Lighting LED light engine.
- Inspecció: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician or WAC Lighting customer support.
7. Solució De Problemes
If you experience issues with your Aether LED trim, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha energia a l’aparell. Connexió de cablejat solta. Faulty LED light engine. | Comproveu l'interruptor/fusible. Verify all wiring connections are secure (power off). Contact customer support for LED engine replacement. |
| La llum parpelleja o s'atenua de manera inconsistent. | Interruptor regulador d'intensitat incompatible. Connexió de cablejat solta. Interferència elèctrica. | Ensure dimmer is compatible with ELV/0-10V LED. Comproveu les connexions del cablejat (apagat). Consult an electrician to check for line voltage qüestions. |
| La producció de llum és inferior a l'esperada. | Ajust del regulador d'intensitat massa baix. Incorrect light engine installed. | Ajusteu el regulador d'intensitat al màxim. Verify the correct WAC Lighting LED light engine is installed. |
8. Especificacions tècniques
| Especificació | Detall |
|---|---|
| Número de model | R2ARDT-W927-BKWT |
| Marca | Il·luminació WAC |
| Dimensions del producte | 4.13 cm de llargada x 4.13 cm d'amplada x 2.5 cm d'alçada |
| Pes de l'article | 10.6 unces |
| Material | Alumini |
| Color | Negre / Blanc |
| Tipus de font de llum | LED |
| Wattage | 15 watts |
| Voltage | 120 Volts |
| Brillantor | 1134 lúmens |
| Temperatura de color | 2700 Kelvin |
| CRI (índex de reproducció del color) | 90 |
| Angle del feix | Wide Beam - 50 degrees |
| Mètode de control | Remote (Dimmer dependent) |
| Tipus de muntatge | Muntatge al sostre |
| Usos específics | Commercial, Indoor, Outdoor, Residential |
9. Informació de la garantia
This WAC Lighting product is covered by a 1477-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official WAC Lighting warranty documentation or contact customer support.
10. Atenció al client
For further assistance, technical support, or warranty inquiries, please visit the official WAC Lighting store or contact their customer service department.
WAC Lighting Store: Visit WAC Lighting on Amazon
