Introducció
This manual provides essential instructions for the safe installation, operation, and maintenance of your WAC Lighting Aether 2-inch Round Wall Wash Light Engine Trim with integrated LED. Please read this guide thoroughly before installation and retain it for future reference.
Informació de seguretat
ADVERTIMENT: Risk of electric shock. Disconnect power at the circuit breaker before installation or servicing. All electrical connections must be in accordance with local and national electrical code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- No instal·leu a prop de materials combustibles.
- Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
- This product is designed for indoor and outdoor use, as specified.
- No modifiqueu l'aparell. Qualsevol modificació pot anul·lar la garantia i crear riscos per a la seguretat.
- Avís de la Proposició 65: Aquest producte pot contenir substàncies químiques que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Aether 2in Round Wall Wash Light Engine Trim & LED
- Maquinari de muntatge
- Manual d'instruccions (aquest document)
Configuració i instal·lació
This LED trim is designed for use with WAC Lighting New Construction Housings: HR-2LED-H13A or HR-2LED-H13AC. Installation requires assembly and ceiling mounting.
- Preparar l'habitatge: Ensure the compatible housing (HR-2LED-H13A or HR-2LED-H13AC) is properly installed in the ceiling according to its own instruction manual.
- Desconnexió d'alimentació: Before proceeding, ensure power to the circuit is turned OFF at the main electrical panel.
- Connecteu el cablejat: Carefully connect the electrical wires from the LED trim to the corresponding wires in the housing. Follow standard wiring practices: black to black (live), white to white (neutral), and green or bare copper to ground. Secure connections with wire nuts.
- Insert Trim: Gently push the LED trim into the housing opening until the springs or clips engage and hold the trim flush with the ceiling surface. The ultra-low profile design (2.5 inches housing height for 2-inch trim) allows for installation in tight plenums.
- Retall segur: Ensure the trim is securely seated and flush.
- Restaura l'alimentació: Un cop finalitzada la instal·lació, restableu l'alimentació a l'interruptor.
Imatge: Dimensional diagram of the Aether 2-inch round wall wash light engine trim, illustrating its compact design and mounting points. The diagram shows a top-down view with a 4 1/8 inch diameter and a side view indicating a 2 1/2 inch depth for the light engine.
Imatge: Un front de primer pla view of the WAC Lighting Aether 2-inch Round Wall Wash Light Engine Trim. The trim is white with a textured glass lens, and black housing is visible at the top. Two spring clips extend from the sides, used for securing the trim into a recessed housing.
Instruccions de funcionament
The WAC Lighting Aether LED trim is designed for simple operation once installed.
- Encès/apagat: Control the light fixture using a standard wall switch connected to the circuit.
- Dimecres: This fixture supports smooth and continuous dimming down to 1%. Use an Electronic Low Voltage (ELV) Dimmer or a 0-10V dimmer for optimal performance. Consult the dimmer manufacturer's instructions for proper wiring and operation.
- Sortida de llum: The integrated LED provides up to 1350 lumens of brightness.
- Temperatura de color: The light engine is available in various color temperatures, including 2700K, 3000K, 3500K, or 4000K. The specific model (R2ARWT-A830-WT) features a 3000 Kelvin color temperature.
Manteniment
Minimal maintenance is required for your LED light engine trim.
- Neteja: Ensure power is off before cleaning. Wipe the trim and lens with a soft, dry, or slightly damp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
- Mòdul LED: The LED light engine is replaceable. If the LED module requires replacement, contact WAC Lighting customer support or a qualified electrician.
- Hores qualificades: The LED has a rated lifespan of 65,000 hours.
Resolució de problemes
If you experience issues with your light fixture, refer to the following common solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha corrent a l'aparell; cablejat solt; interruptor defectuós. | Check circuit breaker. Verify all wiring connections are secure. Test the wall switch. |
| La llum parpelleja o s'atenua de manera incorrecta. | Incompatible dimmer; loose dimmer wiring; electrical interference. | Ensure an ELV or 0-10V dimmer is used. Check dimmer wiring. Consult an electrician if flickering persists. |
| La producció de llum és inferior a l'esperada. | Dimmer setting too low; incorrect voltage. | Adjust dimmer to maximum setting. Verify correct voltage (120V) es subministra. |
If troubleshooting steps do not resolve the issue, contact WAC Lighting customer support.
Especificacions
| Marca | Il·luminació WAC |
| Número de model | R2ARWT-A830-WT |
| Nom del model | Aether LED 2in Round Wall Wash Trim with LED Light Engine |
| Dimensions del producte | 4.13 cm de llargada x 4.13 cm d'amplada x 2.5 cm d'alçada |
| Pes de l'article | 0.77 lliures (12.3 unces) |
| Material | Aluminum (Fixture), Glass (Shade) |
| Color | Blanc |
| Tipus de font de llum | LED |
| Wattage | 15 watts |
| Voltage | 120 Volts |
| Brillantor | 1350 lúmens |
| Temperatura de color | 3000 Kelvin (Also available in 2700K, 3500K, 4000K) |
| CRI | 85-90 |
| Hores qualificades | 65,000 hores |
| Atenuació | Smooth and continuous to 1% with ELV or 0-10V dimmer |
| Tipus de muntatge | Muntatge al sostre (encastat) |
| Característica especial | Heavy Duty, Ultra-low profile disseny |
| Certificació | Energy Star |
| UPC | 790576661728 |
Garantia
This WAC Lighting product is covered by a Garantia limitada del fabricant d'2 any. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty details, please refer to the official WAC Lighting warranty policy or contact customer support.
Suport
For technical assistance, replacement parts, or warranty inquiries, please contact WAC Lighting customer support. You can find contact information on the official WAC Lighting weblloc web o a través del vostre distribuïdor.
Il·luminació WAC Weblloc: www.waclighting.com