1. Introducció
Thank you for choosing the Artemide Tolomeo Table Lamp Micro. This manual provides essential information for the safe and efficient use of your new lamp. The Tolomeo Micro is designed with a fully adjustable, articulated anodized aluminum arm and body, featuring die-cast aluminum joints and tension control knobs for precise positioning. Its monochromatic matte finish complements various interior styles.
Si us plau, llegiu aquest manual detingudament abans de la instal·lació i el funcionament, i conserveu-lo per a futures consultes.
2. Informació de seguretat
Observe the following safety precautions to prevent injury or damage to the lamp:
- Assegureu-vos que la font d'alimentació voltage coincideix amb la lampRequisits de (120 V).
- Desconnecteu sempre la lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
- No supereu la potència màximatage specified for the bulb (100W max). Use only E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamps.
- Avoid touching the bulb directly after use, as it may be hot.
- No feu funcionar lamp with a damaged cord or plug. If damaged, contact qualified service personnel.
- Mantingueu la lamp away from water or other liquids. Do not use in damp o llocs humits.
- Assegureu-vos que lamp base is placed on a stable, level surface to prevent tipping.
- Aquesta lamp està dissenyat només per a ús interior.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- Artemide Tolomeo Table Lamp Micro (Articulated Arm, Head, Base)
- Cable d'alimentació
- Bombeta no inclosa.
4. Configuració
4.1 Desembalatge i col·locació
Carefully remove all components from the packaging. Place the lamp base on a flat, stable surface. Ensure there is sufficient space for the articulated arm to extend and adjust without obstruction.
Image: Two Artemide Tolomeo Table Lamps, illustrating the adjustable arm and stable base design.
4.2 Bulb Installation
- Assegureu-vos que lamp està desconnectat de la presa de corrent.
- Gently unscrew the lamp head to access the bulb socket.
- Insert an E26 (medium base) A19 compatible bulb, ensuring it does not exceed 100W.
- Cargol la lamp head back into place securely.
Image: Close-up of the lamp head, indicating the area for bulb installation.
4.3 Connexió d'alimentació
Plug the power cable into a standard 120V electrical outlet. Ensure the cable is not pinched or routed in a way that could cause a tripping hazard.
5. Instruccions de funcionament
5.1 Encesa/apagada
The Artemide Tolomeo Table Lamp Micro features a touch switch for convenient operation. Locate the touch-sensitive area on the lamp (typically on the base or head, refer to product specifics if available). A single touch will turn the lamp encès o apagat.
5.2 Adjusting the Lamp
El lamp's articulated arm and head offer extensive adjustability:
- Ajust del braç: Gently move the articulated aluminum arm to position the light source as desired. The tension control knobs at the joints allow for smooth movement and stable positioning.
- Rotació d'ombra: El lamp head can rotate 360 degrees, allowing you to direct light precisely where needed.
Image: Artemide Tolomeo Table Lamps in an extended position, highlighting the adjustable arm functionality.
6. Manteniment
6.1 Neteja
Desendolleu sempre la lamp abans de netejar.
- Wipe the aluminum surfaces with a soft, dry cloth.
- Per a marques difícils, utilitzeu una mica de damp cloth with a mild, non-abrasive cleaner. Dry immediately.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
6.2 Substitució de la bombeta
Refer to section 4.2 for detailed bulb installation instructions. Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it.
6.3 Ajust de la tensió
If the articulated arm feels too loose or too stiff, the tension control knobs at the joints can be adjusted. Turn them clockwise to increase tension or counter-clockwise to decrease tension, finding a comfortable balance for movement and stability.
7. Solució De Problemes
Si teniu problemes amb el vostre lamp, consulteu els problemes i solucions habituals següents:
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén. |
|
|
| La llum parpelleja. |
|
|
| Arm does not hold position. |
|
|
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Artemida |
| Model | Tolomeo Table Lamp Micro |
| Número de part | 784862011120 |
| Dimensions (Max) | 50.81 "P x 30.75" W x 17.52" H |
| Pes de l'article | 3 lliures |
| Material | Cast Aluminum, Metal |
| Tipus d'acabat | Acabat mat |
| Base del bulb | E26 (Base Mitjana) |
| Max Wattage | 100 watts |
| Tipus de font de llum | CFL, Incandescent, LED compatible |
| Tipus de canvi | Toca |
| Característica especial | Adjustable Arm, 360-degree Shade Rotation |
| Font d'alimentació | Elèctric amb cable |
| Ús interior/exterior | Interior |
9. Garantia i Suport
Artemide products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Artemide weblloc.
For technical support, replacement parts, or any inquiries not covered in this manual, please contact Artemide customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's weblloc.
