SEAC Partner Freediving Wrist Computer User Manual

1. Introducció i finalview

The SEAC Partner is a wrist-mounted computer specifically designed for freediving activities. It provides essential real-time data to enhance your freediving experience and safety. This manual will guide you through the setup, operation, and maintenance of your device.

Característiques principals:

• Displays dive and ascent speed, temperature, dive time, surface time, and depth on a single screen.
• Integrated stopwatch and countdown functions.
• Records up to 99 freediving sessions.
• Powered by a standard CR2032 battery.
• Water-resistant up to 100 meters (330 feet).
• Backlit display for clear visibility in low-light conditions.

2. Configuració

2.1 Instal·lació de la bateria

The SEAC Partner uses one CR2032 lithium-ion battery. Ensure the battery is correctly installed for proper operation.

1. Localitzeu el compartiment de la bateria a la part posterior del dispositiu.
2. Using a small screwdriver, carefully open the battery cover.
3. Introduïu la pila CR2032 amb el costat positiu (+) cap amunt.
4. Securely close the battery cover, ensuring the O-ring seal is properly seated to maintain water resistance.

2.2 Configuració inicial (hora, data, unitats)

Upon first use or after battery replacement, you will need to set the time, date, and preferred units.

1. Manteniu premut el botó MODE botó per entrar al menú de configuració.
2. Utilitza el AJUSTAR button to cycle through options (Time, Date, Units).
3. Utilitza el SET button to select an option and adjust values.
4. For units, select between metric (meters, Celsius) or imperial (feet, Fahrenheit).
5. Premeu MODE again to save and exit the settings.

3. Instruccions de funcionament

3.1 Navegació bàsica

The SEAC Partner features multiple modes accessible via the control buttons:

• Botó MODE: Cycles through main operating modes (Time, Dive, Log, Stopwatch, Countdown).
• Botó AJUSTAR: Changes values or scrolls through data within a mode.
• Botó SET: Confirma les seleccions o accedeix a submenús.
• Botó LLUM: Activa la retroiluminació de la pantalla.

3.2 Freediving Mode

The device automatically enters freediving mode when submerged to a certain depth. It will display current depth, dive time, and water temperature.

• During Dive: Monitor current depth, dive time, and ascent/descent rates.
• Surface Interval: After surfacing, the computer will display surface time and previous dive data.

3.3 Viewing Dive Logs

The SEAC Partner stores up to 99 freediving sessions.

1. From the Time mode, press the MODE botó fins arribar al REGISTRE mode.
2. Utilitza el AJUSTAR button to scroll through recorded dives.
3. Each log entry will show maximum depth, dive time, and water temperature for that session.

4. Manteniment

4.1 Neteja i emmagatzematge

Proper care ensures the longevity and accuracy of your SEAC Partner.

• After each use in saltwater, rinse the device thoroughly with fresh water.
• Dry the computer completely with a soft cloth before storage.
• Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Avoid using chemical cleaners or solvents, as these can damage the casing and seals.

4.2 Substitució de la bateria

When the battery low indicator appears, replace the CR2032 battery promptly. Always ensure the O-ring is clean and properly seated when closing the battery compartment to maintain water resistance. If you are unsure, have a qualified technician replace the battery.

5. Solució De Problemes

• La pantalla està en blanc: Check battery level. Replace battery if necessary. Ensure battery is inserted correctly.
• Lectures incorrectes: Ensure the device is clean and free of debris, especially around the pressure sensor. Perform a factory reset if issues persist (refer to the full manual for reset procedures).
• Els botons no responen: Ensure the device is dry. Buttons cannot be pressed underwater. If unresponsive when dry, contact support.
• Entrada d'aigua: If you suspect water has entered the device, immediately stop using it and contact SEAC support. Do not attempt to open the device further.

6. Especificacions

7. Informació de la garantia

The SEAC Partner Freediving Wrist Computer is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the documentation included with your product or visit the official SEAC weblloc.

8. Suport

If you encounter any issues or have questions regarding your SEAC Partner Freediving Wrist Computer that are not covered in this manual, please contact SEAC customer support. You can typically find contact information on the official SEAC weblloc web o a través del vostre distribuïdor local autoritzat.

Recursos en línia:

• Visit the official SEAC weblloc web per a preguntes freqüents, registre de productes i recursos d'assistència addicionals.
• Check for firmware updates (if applicable) on the manufacturer's support page.