YAESU SBH-28

YAESU SBH-28 Desktop Rapid Charger Instruction Manual

1. Introducció

The YAESU SBH-28 is a desktop rapid charger designed for use with the YAESU FT-70DR handheld transceiver and its compatible battery packs. This charger provides a convenient and efficient method for recharging your radio's battery, ensuring your device is always ready for operation. It requires an external AC adapter (such as SAD-18B, SAD-24B, or SAD-25B, typically supplied with the radio) or a 12V DC adapter (SDD-13) for power.

2. Informació de seguretat

  • Use only the specified YAESU AC adapters (SAD-18B, SAD-24B, SAD-25B) or the SDD-13 12V DC adapter. Using an incorrect power adapter may damage the charger or the radio and could pose a fire hazard.
  • No exposeu el carregador a l'aigua ni a la humitat.
  • No intenteu desmuntar ni modificar el carregador. Encarregueu tot el manteniment a personal qualificat.
  • Ensure the charger is placed on a stable, flat surface away from direct sunlight and heat sources.
  • Mantenir fora de l'abast dels nens.

3. Contingut del paquet

Verifiqueu que el vostre paquet conté el següent article:

  • YAESU SBH-28 Desktop Rapid Charger Unit

Nota: The necessary AC power adapter (e.g., SAD-18B, SAD-24B, SAD-25B) or DC adapter (SDD-13) is no inclòs with the SBH-28 charger and must be acquired separately or used from your FT-70DR radio's original accessories.

4. Configuració

  1. Connecteu l'adaptador de corrent: Insert the barrel connector of your compatible AC or DC power adapter into the DC IN jack located on the rear of the SBH-28 charger.
  2. Connecteu-vos a la font d'alimentació: Plug the AC adapter into a standard wall outlet, or the DC adapter into a compatible 12V DC power source.
Image of the Yaesu SBH-28 Desktop Rapid Charger, a black plastic cradle designed to hold a radio or battery for charging.

This image displays the Yaesu SBH-28 Desktop Rapid Charger. It is a compact, black plastic unit with a recessed area shaped to securely hold a Yaesu FT-70DR radio or its battery pack for charging. The charger features a power input port on the rear for connection to an external AC or DC adapter.

5. Instruccions de funcionament

To charge your FT-70DR radio or its battery pack:

  1. Ensure the SBH-28 charger is properly connected to a power source as described in the Setup section.
  2. Carefully place the FT-70DR radio (with its battery attached) or a standalone battery pack into the charging cradle. Ensure the contacts on the battery/radio align with the charging terminals in the SBH-28. The radio or battery should sit securely in the cradle.
  3. Refer to your FT-70DR radio's instruction manual for details on the charging indicator light behavior (e.g., color changes, blinking patterns) to confirm charging status. The SBH-28 facilitates rapid charging.
  4. Once the battery is fully charged, remove the radio or battery pack from the cradle.

6. Manteniment

  • Keep the charging contacts clean and free of dust or debris. Use a dry, soft cloth to wipe them if necessary.
  • Do not use harsh chemicals or abrasive cleaners on the charger.
  • Guardeu el carregador en un lloc sec quan no l'utilitzeu.

7. Solució De Problemes

  • Charger not powering on or radio not charging:
    • Verify that the power adapter is securely connected to both the SBH-28 and the wall outlet/DC source.
    • Ensure you are using a compatible YAESU power adapter (SAD-18B, SAD-24B, SAD-25B, or SDD-13). Incorrect adapters may not provide sufficient power or may have incorrect voltage/polaritat.
    • Check the power outlet or DC source for functionality.
    • Ensure the radio or battery pack is correctly seated in the cradle, making proper contact with the charging terminals.
  • Charging indicator light flickers or shows inconsistent status:
    • This can sometimes occur if the radio or battery is not perfectly seated. Try re-seating the radio/battery in the cradle.
    • Ensure the power adapter connection is firm.
    • Consult your FT-70DR radio's manual for specific interpretations of indicator light behavior.

8. Especificacions

MarcaYAESU
Número de modelSBH-28
ColorNegre
Pes de l'article0.25 lliures (aprox. 113 grams)
Entrada Voltage12 volts (CC)
Vol. De sortidatage12 volts (CC)
Tipus de connector utilitzat al cableBarrel Jack
Nombre de Ports1

9. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your original YAESU FT-70DR radio or visit the official YAESU weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.