Monoprice 133833 Immersive Satellite Speakers User Manual

1. Introducció

Gràcies per la compraasing the Monoprice 133833 Immersive Satellite Speakers. These speakers are designed to enhance your home cinema experience by providing multi-dimensional sound, fully compatible with standard and Dolby Atmos receivers. This manual provides essential information for the safe and optimal use of your new speakers.

2. Informació de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans d'utilitzar aquest producte. Conservi aquest manual per a futures consultes.

Seguretat elèctrica: Do not expose the speakers to water or moisture. Ensure all connections are secure before powering on your audio system.
Col·locació: Place speakers on a stable, level surface to prevent tipping. Avoid placing near heat sources or in direct sunlight.
Ventilació: Ensure adequate airflow around the speakers. Do not block ventilation openings.
Neteja: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosols.
Manteniment: No intenteu fer la reparació d'aquest producte vosaltres mateixos. Envieu totes les tasques de manteniment a personal qualificat.
Nivells de volum: L'exposició prolongada a nivells de volum elevats pot causar danys auditius permanents. Aneu amb compte en ajustar el volum.

3. Contingut del paquet

Please ensure all items are present and in good condition. If any items are missing or damaged, contact Monoprice customer support.

2x Monoprice 133833 Immersive Satellite Speakers
1x Manual d'usuari (aquest document)

4. Característiques del producte

The Monoprice 133833 speakers are designed with advanced features for an enhanced audio experience:

So immersiu: Upward-firing drivers project sound towards the ceiling, which then reflects down into the listening area, creating a 3D audio space. This design is fully compatible with Dolby Atmos enabled receivers and audio tracks.
Mida compacta: Each speaker measures approximately 11.4 x 26.7 x 13.5 cm (4.5 x 10.5 x 5.3 inches) and weighs about 2.26 kg (5 lbs), making them suitable for various room setups.
High-Quality Drivers: Features a 3/4-inch aluminum dome tweeter and a 3-inch polypropylene woofer for clear highs and rich lows. An additional 3-inch polypropylene driver is used for the immersive height channel.
Maneig de potència: Capable of handling up to 100 watts of input power.
Connectivitat: Equipped with binding post connectors for secure and reliable speaker wire connections.

Monoprice 133833 Immersive Satellite Speaker, front view

Figura 4.1: Frontal view of a Monoprice 133833 Immersive Satellite Speaker, showing the main drivers and the upward-firing driver on top.

5. Configuració

5.1 Col·locació dels altaveus

For optimal immersive sound, place the speakers on top of your front left and right main speakers, or on a stable surface at the front of your listening area. Ensure the upward-firing drivers are unobstructed and facing the ceiling. The ceiling should be flat and reflective for the best effect.

Figure 5.1: A pair of Monoprice 133833 Immersive Satellite Speakers, designed for placement on existing speakers or stands.

5.2 Connexió dels altaveus

These speakers connect to your AV receiver's height channels (e.g., Front Height, Top Front, or Dolby Atmos Enabled Speaker outputs) using standard speaker wire. Each speaker features two sets of binding posts: one for the main drivers and one for the upward-firing immersive driver.

Identify the speaker wire terminals on your AV receiver for the height channels.
Prepare your speaker wires by stripping approximately 1/2 inch (1.2 cm) of insulation from the ends.
Connect the positive (+) terminal of the speaker to the positive (+) terminal of the corresponding height channel on your receiver.
Connect the negative (-) terminal of the speaker to the negative (-) terminal of the corresponding height channel on your receiver.
Ensure all connections are tight and that there are no stray wire strands that could cause a short circuit.

posterior view of Monoprice 133833 speaker showing binding posts

Figure 5.2: Rear panel of the speaker, illustrating the dual binding post connections for the main and immersive drivers.

Note on Impedance: The speakers have an impedance of 8 Ohms. Ensure your receiver is compatible with this impedance. If your receiver has settings for speaker impedance, select the appropriate setting.

6. Instruccions de funcionament

Once connected, operate the speakers through your AV receiver. Refer to your receiver's manual for specific instructions on configuring height channels and Dolby Atmos settings.

Configuració del receptor: Access your AV receiver's setup menu. Configure the speaker setup to include "Dolby Atmos Enabled Speakers" or "Front Height" speakers, depending on your receiver's options.
Calibració: Use your receiver's automatic room calibration system (e.g., Audyssey, MCACC, YPAO) to optimize sound levels and delays for your listening environment.
Material original: For the full immersive experience, use audio content encoded with Dolby Atmos or DTS:X. The speakers will also enhance standard surround sound formats.

7. Manteniment

These speakers require minimal maintenance to ensure long-lasting performance.

Neteja: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
Grilles: Les reixetes dels altaveus es poden treure amb cura per netejar-les si cal. Feu servir un raspall suau o un aspirador amb un accessori de raspall per eliminar la pols.
Medi ambient: Avoid exposing the speakers to extreme temperatures, humidity, or direct sunlight, which can degrade materials over time.

Figura 7.1: lateral view of the speaker with its protective grille installed.

8. Solució De Problemes

If you experience issues with your speakers, refer to the following troubleshooting guide:

Problema	Causa possible	Solució
No hi ha so dels altaveus	Connexions soltes del cable de l'altaveu. Incorrect receiver settings. Receiver not powered on or in standby.	Check and secure all speaker wire connections at both the speaker and receiver. Verify speaker configuration in your AV receiver's menu. Ensure receiver is powered on and the correct input is selected.
So distorsionat o poc clar	Damaged speaker wire. Excedit ampmés viu. Incorrect speaker impedance setting on receiver.	Inspect speaker wires for damage; replace if necessary. Redueix el nivell de volum. Check receiver's impedance settings.
No immersive (height) effect	Incorrect receiver setup for height channels. Non-Dolby Atmos/DTS:X source material. Obstruction of upward-firing driver.	Ensure receiver is configured for Dolby Atmos Enabled speakers or height channels. Play content with Dolby Atmos or DTS:X encoding. Ensure nothing is blocking the top of the speaker.

9. Especificacions

Detailed technical specifications for the Monoprice 133833 Immersive Satellite Speakers:

Número de model	133833
Tipus d'altaveu	Satellite, Dolby Atmos Enabled
Woofer	3-inch Polypropylene
Tweeter	3/4-inch Aluminum Dome
Immersive Driver	3-inch Polypropylene (upward-firing)
Manipulació de potència	100 Watts (Maximum Input)
Sensibilitat	88 dB
Impedància	8 ohms
Connectivitat	Post vinculant
Dimensions (A x A x P)	11.4 x 26.7 x 13.5 cm (4.5 x 10.5 x 5.3 polzades)
Pes (cada un)	Aproximadament 2.26 kg (5 lliures)
Material	Aluminum (tweeter dome), Polypropylene (woofers)
Color	Negre

10. Garantia i Suport

Monoprice stands behind its products with comprehensive warranty and support services.

Garantia de reemplaçament de 1 anys: This product is covered by a 1-year replacement warranty from the date of purchase.
Garantia de devolució de 30 dies: If you are not completely satisfied with your purchase, you may return it within 30 days for a full refund.
Atenció al client: For technical assistance, warranty claims, or other inquiries, please visit the official Monoprice weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

133833. Monopreu