EPEVER 60A MPPT Solar Charge Controller

1. Introducció

This manual provides essential information for the installation, operation, and maintenance of your EPEVER 60A MPPT Solar Charge Controller, Model Tracer6415AN. This controller is designed to optimize power harvesting from your solar panels and efficiently charge various battery types in off-grid solar applications. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Característiques del producte

• Negative Ground Tracer AN series MPPT Controller: Supports 12V/24V/36V/48V auto-identifying system voltage. Features an auto-control system to limit charging power and current to prevent exceeding rated values.
• Alta capacitat d'entrada: Max Input Current: 60 amp. Max Input Solar Power: 750W/12V, 1500W/24V, 2250W/36V, 3000W/48V. Max input Voltage: 150 V.
• Compatibilitat de la bateria: Supports 4 types of battery charging: Lithium, Lead-acid (Sealed, AGM, Gel, Flooded), and User-defined (note: Lithium settings cannot be user-defined). Includes battery temperature compensation for extended controller life.
• Interfície de comunicació: Equipped with an RS-485 communication bus interface and Modbus communication protocol, suitable for various communication requirements.
• Activació de la bateria de liti: Upgraded versions (from August 2020 onwards) support lithium batteries and include a lithium battery activation function.

3. Producte acabatview

The EPEVER 60A MPPT Solar Charge Controller features a robust design with clearly labeled components for easy installation and operation. Below is a diagram identifying the main parts of the controller.

Figura 3.1: Components del controlador
This image displays the EPEVER 60A MPPT Solar Charge Controller from the front, highlighting key components with numbered labels for identification. These include the Charging LED indicator, Fault LED indicator, SELECT button, ENTER button, Battery Terminals, PV Terminals, Fuse, Load control relay, RBVS Port, Utility/Generator relay ON, Utility/Generator relay OFF, RS485 port, RTS Port, Generator and load relay enable, PV reverse polarity alarm indicator, and Grounding Terminal.

The controller's LCD display provides real-time information and allows for configuration. The following image illustrates the various screens and navigation options.

Figure 3.2: LCD Display Navigation
This image shows the EPEVER 60A MPPT Solar Charge Controller's LCD display and the sequence of information screens accessible via the SELECT and ENTER buttons. Screens display PV voltage, PV current, PV kWh, battery voltage, battery current, battery temperature, load current, and load kWh.

The controller is designed with multiple protection features to ensure safe and reliable operation.

Figura 3.3: Característiques de protecció
This image highlights the various protection mechanisms integrated into the EPEVER 60A MPPT Solar Charge Controller, including PV Over Current/Power Protection, PV Reverse Polarity Protection, Night Reverse Charging Protection, Battery Over Voltage Protection, Battery Over Discharge Protection, Load Overload Protection, Lithium Battery Low Temperature Protection, and TVS High Voltage Transients Protection.

4. Configuració i instal·lació

4.1 Precaucions de seguretat

• Assegureu-vos que totes les connexions estiguin segures i correctes abans d'aplicar l'alimentació.
• Always connect the battery to the controller first, then the solar panel. Disconnect in the reverse order.
• Instal·leu el controlador en una zona ben ventilada, allunyada de la llum solar directa, de les altes temperatures i de la humitat.
• The controller shell must be properly grounded to shield against electromagnetic interference and prevent electric shock.

4.2 Connexions de cablejat

Connect the components in the following sequence:

1. Connecteu la bateria: Connect the battery to the controller's battery terminals. Ensure correct polarity.
2. Connecteu la càrrega (opcional): If using a DC load directly from the controller, connect it to the load terminals.
3. Connecteu el panell solar: Connect the solar panel array to the controller's PV terminals. Ensure correct polarity.

Figure 4.1: Fuse and Port Details
Aquesta imatge ofereix un detall view of the fuse and various connection ports on the EPEVER 60A MPPT Solar Charge Controller, including the battery and PV terminals, and communication ports.

4.3 Selecció del tipus de bateria

The controller supports various battery types: Flooded, Gel, AGM/Sealed, and Lithium-ion. For user-defined settings, only lead-acid battery parameters can be customized. Lithium battery parameters are pre-set and cannot be user-defined directly on the controller.

Figura 4.2: Compatibilitat de la bateria
This image illustrates the compatibility of the MPPT Charge Controller with various battery types: Flooded, Gel, SLD (AGM/Sealed), USER (custom battery), and LI (Lithium-ion). It also notes that programming for Lithium batteries can be done via PC (RS485 accessory needed) or phone APP (Ebox-Wifi or Ebox-Blue accessories needed).

5. Instruccions de funcionament

5.1 LCD Display Operation

Use the 'SELECT' and 'ENTER' buttons to navigate through the display screens and adjust settings. Refer to Figure 3.2 for a visual guide to the display screens.

5.2 Programming for Lithium Batteries

To program the controller for Lithium batteries, you will need additional accessories:

• Per PC: An RS485 communication cable is required to connect the controller to a computer.
• Via Phone APP: An Ebox-Wifi or Ebox-Blue module is needed to enable wireless communication with a smartphone application.

Detailed instructions for software and app usage are typically provided with the respective communication accessories.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your solar charge controller:

• Inspecció: Comproveu periòdicament totes les connexions del cablejat per verificar si estan ben ajustades i si hi ha corrosió.
• Neteja: Mantingueu el controlador net i lliure de pols i brutícia. Feu servir un drap sec per netejar-lo.
• Ventilació: Ensure the installation area has adequate ventilation to prevent overheating.
• Comprovació de la bateria: Monitor de vol de la bateriatage i salut segons les directrius del fabricant de la bateria.

7. Solució De Problemes

If you encounter issues with your EPEVER 60A MPPT Solar Charge Controller, consider the following common troubleshooting steps:

• Sense pantalla/alimentació: Check battery connections and ensure the battery is charged. Verify the fuse is intact.
• Sense càrrega: Confirm solar panel connections and ensure there is sufficient sunlight. Check for any PV reverse polarity alarms.
• Vol incorrectetage Lectures: Verify all wiring is correctly connected and tightened.
• Protecció de sobrecàrrega: If the load is disconnected, reduce the load connected to the controller.

Per a problemes persistents, consulteu el manual complet del producte o poseu-vos en contacte amb l'atenció al client.

8. Especificacions

Key technical specifications for the EPEVER 60A MPPT Solar Charge Controller (Tracer6415AN):

Per a les dimensions detallades, consulteu el diagrama següent:

Figure 8.1: Controller Dimensions
This image provides the physical dimensions of the EPEVER 60A MPPT Solar Charge Controller, showing its height (H: 134MM), length (L: 394MM), and width (W: 240MM), along with details of the heat sink fins.

9. Garantia i Suport

The EPEVER 60A MPPT Solar Charge Controller comes with a manufacturer's warranty for 2 anys des de la data de compra.

For technical support, warranty claims, or further inquiries, please refer to the contact information provided with your product packaging or visit the official EPEVER weblloc.