SEIKO KX249B Radio Wave Analog Wall Clock Instruction Manual

1. Introducció

Gràcies per la compraasing the SEIKO KX249B Radio Wave Analog Wall Clock. This clock features a natural wood frame and automatically corrects its time by receiving standard radio waves, ensuring precise timekeeping. This manual provides essential information for the proper setup, operation, and maintenance of your clock.

Image 1.1: The SEIKO KX249B Radio Wave Analog Wall Clock in a typical home setting.

2. Configuració

2.1 Instal·lació de la bateria

1. Obriu la tapa del compartiment de la bateria situada a la part posterior del rellotge.
2. Insert one (1) AA battery, ensuring the positive (+) and negative (-) terminals are aligned correctly according to the indicators inside the compartment.
3. Tanqueu bé la tapa del compartiment de la bateria.

2.2 Initial Time Setting and Radio Wave Reception

Upon battery installation, the clock will automatically attempt to receive radio waves to set the correct time. This process may take several minutes.

• Col·locació òptima: For best reception, place the clock near a window where radio waves can be easily received.
• Eviteu interferències: Keep the clock away from sources of strong electromagnetic interference, such as high-voltage lines, TV towers, train rails, and electronic appliances like TVs, refrigerators, air conditioners, computers, and fax machines.
• Només per a ús interior: This clock is designed for indoor use.

Imatge 2.1: posterior view of the clock, illustrating the battery compartment and control buttons.

3. Instruccions de funcionament

3.1 Automatic Time Correction

The SEIKO KX249B clock is equipped with a radio wave correction function (40 kHz/60 kHz automatic selection). It will periodically receive time signals to ensure accuracy. If radio waves are not received, the clock will operate with standard quartz accuracy.

3.2 Sweep Second Hand and Sleep Function

• The clock features a smooth, continuous sweep second hand movement.
• It includes a sleep second hand function, which automatically stops the second hand in low light conditions (e.g., at night) to conserve battery life and reduce noise. The second hand will resume normal operation when sufficient light is detected.

3.3 Manual Reception / Reception Off Function

Refer to the markings on the back of the clock (Image 2.1) for specific buttons related to manual reception or disabling the radio wave reception function. This may be useful in areas with poor reception or if you prefer to set the time manually.

4. Manteniment

4.1 Substitució de la bateria

When the clock's movement becomes erratic or stops, it is time to replace the battery. Follow the battery installation steps in Section 2.1. Always use a fresh AA battery.

4.2 Neteja

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the wood frame or glass front.

5. Solució De Problemes

• El rellotge no mostra l'hora correcta:
  • Assegureu-vos que la bateria estigui correctament instal·lada i que no estigui esgotada. Substituïu-la si cal.
  • Check the clock's location. Move it closer to a window or to an area with less interference.
  • Allow sufficient time (up to 24 hours) for the clock to receive the radio signal, especially after initial setup or battery change.
  • If in an area known for poor reception, consider manually setting the time if the clock has a reception off function.
• Poor or no radio wave reception:
  • Ubicacions a evitar: Inside buildings, basements, near high-pressure lines, TV towers, train rails, or close to other objects that generate radio wave noise (e.g., metal furniture, large electronic appliances).
  • Reception may also be difficult in vehicles (automotive, train, airplane) or at construction sites and airports due to high traffic and radio interference.
• La maneta dels segons no es mou:
  • Check battery level and replace if needed.
  • Verify if the sleep second hand function is active due to low light conditions. Move the clock to a brighter area.

6. Especificacions

7. Garantia i Suport

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official SEIKO weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

For further assistance, you may contact SEIKO customer service through their official channels.