Audiolab M-ONE Integrated AmpManual d'usuari més viu

1. Introducció

Gràcies per la compraasing the Audiolab M-ONE Integrated Amplifier. The M-ONE is a compact yet powerful stereo integrated amplifier featuring an advanced DSD Digital-to-Analog Converter (DAC) and Bluetooth connectivity. It is designed to deliver high-fidelity audio performance from a variety of digital and analog sources, making it a versatile centerpiece for your audio system.

This manual provides essential information for the safe and optimal operation of your M-ONE unit. Please read it thoroughly before use and retain it for future reference.

2. Informació de seguretat

Please observe the following safety precautions to prevent electric shock, fire, or damage to the unit:

• Font d'alimentació: Connect the unit only to an AC power source of the type indicated on the rear panel. Ensure the voltage is correct for your region.
• Ventilació: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow. Maintain a minimum distance of 10cm (4 inches) around the unit for proper heat dissipation.
• Aigua i humitat: No exposeu la unitat a la pluja, la humitat, les goteges o les esquitxades. No col·loqueu objectes plens de líquids, com ara gerros, a sobre de la unitat.
• Calor: No col·loqueu la unitat a prop de fonts de calor com ara radiadors, registres de calor, estufes o altres aparells (inclosos amplificadors) que produeixen calor.
• Objectes estrangers: Do not insert any objects into the unit's openings. If a foreign object enters the unit, disconnect the power cable immediately and contact qualified service personnel.
• Manteniment: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.
• Neteja: Desendolleu la unitat de la presa de corrent abans de netejar-la. Feu servir només un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol.

3. Contingut del paquet

Carefully unpack the unit. The carton should contain:

• Audiolab M-ONE Integrated Ampmés viu
• Cable d'alimentació de CA.
• Control remot
• Cable USB
• Manual d'usuari (aquest document)

Si falta algun element o està danyat, poseu-vos en contacte amb el vostre distribuïdor immediatament.

4. Producte acabatview

4.1 Tauler frontal

Figura 4.1: Frontal view of the Audiolab M-ONE, showing the OLED display, two rotary controls, headphone jack, and power button.

1. Sortida d'auriculars: Jack de 6.3 mm per connectar auriculars.
2. SEL (Selector) Knob: Rotates to select input sources. Press to confirm selection or enter menu.
3. Pantalla OLED: Shows current input, volume level, and menu information.
4. VOL (Volum) Botó: Rotates to adjust volume level. Press to mute/unmute.
5. Botó d'encesa: Press to turn the unit on or off (standby mode).
6. M-ONE Indicator: Llum LED que indica l'estat de l'alimentació.

4.2 Panell posterior

Figura 4.2: posterior view of the Audiolab M-ONE, displaying various input and output terminals, including power, speaker outputs, digital inputs (Coaxial, Optical, USB), and analog inputs (AUX).

1. Interruptor d'alimentació: Interruptor principal d'encesa/apagada.
2. Entrada d'alimentació CA: Connects to the supplied AC power cable.
3. Terminals d'altaveus: Connect your passive loudspeakers here. Ensure correct polarity (+ to + and - to -).
4. Entrades digitals:
   • COAXIAL: Entrada coaxial digital.
   • TPTICA: Digital optical (Toslink) input.
   • USB B: USB Type B input for connecting to a computer.
5. Analog Inputs (AUX): RCA stereo inputs for analog sources.
6. Disparador de 12 V: Per a un control de potència sincronitzat amb altres components compatibles.

5. Configuració

5.1 Col·locació

Place the M-ONE on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure there is sufficient space around the unit for proper ventilation, especially above the top panel.

5.2 Connexió dels altaveus

Connect your passive loudspeakers to the speaker terminals on the rear panel. Ensure that the positive (+) terminal of the M-ONE is connected to the positive (+) terminal of your speaker, and the negative (-) terminal of the M-ONE is connected to the negative (-) terminal of your speaker. Use high-quality speaker cables for optimal performance.

Precaució:

• Ensure the M-ONE is powered off before making any speaker connections.
• Do not short-circuit the speaker terminals.

5.3 Source Connection

Connecteu les fonts d'àudio a les entrades corresponents del panell posterior:

• Digital Sources (CD Player, Streamer, TV): Use coaxial, optical, or USB cables to connect to the respective digital inputs. For computer connection, use the USB B input.
• Analog Sources (Turntable with Phono Preamp, Tape Deck): Use RCA cables to connect to the AUX inputs.

5.4 Connexió d'alimentació

Once all audio connections are made, connect the supplied AC power cable to the AC power inlet on the rear panel of the M-ONE and then to a suitable wall outlet.

6. Instruccions de funcionament

6.1 Encès/Apagat

First, ensure the main power switch on the rear panel is in the 'ON' position. Then, press the Power Button on the front panel to switch the M-ONE from standby to operational mode. Press it again to return to standby.

6.2 Selecció d'entrada

Gira el SEL knob on the front panel to cycle through the available input sources (e.g., COAX, OPT, USB, AUX, BT). The selected input will be displayed on the OLED screen. Press the SEL botó per confirmar la selecció.

6.3 Control de volum

Gira el VOL knob on the front panel clockwise to increase the volume and counter-clockwise to decrease it. The current volume level will be shown on the OLED display. Press the VOL knob to mute or unmute the audio output.

6.4 Vinculació Bluetooth

Per connectar un dispositiu Bluetooth:

1. Select the 'BT' input using the SEL knob. The display will show "BT Pairing".
2. Al dispositiu mòbil (telèfon intel·ligent, tauleta, etc.), activeu el Bluetooth i cerqueu els dispositius disponibles.
3. Select "Audiolab M-ONE" from the list of devices.
4. Once paired, the display will indicate a successful connection, and you can now stream audio wirelessly to the M-ONE.

6.5 DAC Functionality

The M-ONE features a high-performance DSD DAC. When a digital input (COAX, OPT, USB) is selected, the M-ONE will automatically process the digital audio signal. For USB connection to a computer, you may need to install specific drivers, which can typically be found on the Audiolab website. Refer to your computer's audio settings to select the M-ONE as the output device.

6.6 Sortida d'auriculars

Connect your headphones to the 6.3mm headphone jack on the front panel. When headphones are connected, the loudspeaker output will automatically be muted.

6.7 Navegació i configuració del menú

The M-ONE offers various settings accessible via the OLED display and rotary controls. Press and hold the SEL knob to enter the main menu. Use the SEL knob to navigate through options and the VOL knob to change values. Press SEL to confirm or exit a submenu. Available settings may include:

• Filtres digitals: Select different digital filter characteristics for the DAC.
• Brillantor de la pantalla: Ajusteu la brillantor de la pantalla OLED.
• Standby Timer: Set a timer for automatic standby.
• Volume on Power On: Configure the initial volume level when the unit powers on.

7. Manteniment

To ensure the longevity and optimal performance of your Audiolab M-ONE, follow these maintenance guidelines:

• Neteja: Use a soft, dry, lint-free cloth to clean the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.
• Ventilació: Periodically check that the ventilation slots are clear of dust and debris. Use a soft brush or a vacuum cleaner with a brush attachment to gently remove any accumulation.
• Connexions: Ensure all cables are securely connected. Loose connections can lead to poor audio quality or intermittent issues.
• Emmagatzematge: If storing the unit for an extended period, disconnect it from the power supply and store it in a cool, dry place, preferably in its original packaging.

8. Solució De Problemes

If you experience issues with your M-ONE, consult the following table before contacting service personnel:

9. Especificacions

The following specifications are typical for the Audiolab M-ONE:

• Potència de sortida: 80 watts per channel (into 8 ohms)
• Entrades digitals: Coaxial, Optical, USB Type B
• Entrades analògiques: RCA (AUX)
• Connectivitat sense fils: Bluetooth
• DAC: DSD compatible
• Dimensions (L x A x A): 13.7 x 11.5 x 4.4 polzades (34.8 x 29.2 x 11.2 cm)
• Pes: 16.58 lliures (7.52 kg)
• Voltage: 12 Volts (Internal power supply handles AC100-115V/50-60Hz)
• Fabricant: Audiolab
• Número de model: M-UN

Nota: Les especificacions estan subjectes a canvis sense previ avís.

10. Garantia i Suport

Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty, the terms of which may vary by region. Please refer to the warranty card included with your product or contact your local Audiolab dealer or distributor for specific warranty details.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your authorized Audiolab dealer or visit the official Audiolab weblloc per obtenir informació de contacte.

Weblloc: www.audiolab.co.uk