EASYGUARD EC003-NS PKE Car Alarm System User Manual

1. Producte acabatview

The EASYGUARD EC003-NS is a smart key Passive Keyless Entry (PKE) car alarm system designed to enhance vehicle security and convenience. It integrates PKE, remote engine start, push-button start, and shock alarm functionalities. This system allows for automatic locking and unlocking of your vehicle as you approach or walk away with the key fob, providing a seamless and modern user experience.

2. Característiques clau

• Passive Keyless Entry (PKE): Automatically locks/unlocks doors when the key fob is within 3-6 feet (approach) or 6-9 feet (walk away) of the vehicle.
• Push Button Start/Stop: Start or stop your vehicle's engine with a simple press of a button.
• Remote Engine Start/Stop: Conveniently pre-warm or pre-cool your vehicle from a distance.
• Arm/Lock & Disarm/Unlock: Standard security functions for vehicle protection.
• Silenciar l'alarma: Silence alarm notifications for discreet operation.
• Mode de pànic: Activate the alarm for emergency situations.
• Antisegrestament: Enhanced security feature to prevent vehicle theft.
• Remote Trunk Release: Open your vehicle's trunk remotely (may require an extra solenoid kit).
• Shock Alarm Warning: Alerts to potential impacts or disturbances.
• Illegal Door Opening/ACC Triggered Warning: Notifies of unauthorized access attempts.
• Mode valet: Temporarily disables certain security features for service.
• Central Door Locking Automation: Automatically locks doors when driving.
• Emergency Override & Disarm: Manual override options for critical situations.
• Reset Switch & Programming Method: For system configuration and troubleshooting.

3. Contingut del paquet

The EASYGUARD EC003-NS system includes the following components:

Imatge: Main components of the EASYGUARD EC003-NS system, including two key fobs, the main control unit, push start button, siren, and various wiring harnesses and antennas.

• Unitat de control principal
• Two Key Fobs (with CR2032 batteries included)
• Push Start/Stop Button
• Sirena
• PKE Antennas (Front and Rear)
• Antena HF
• Arnès de cablejat
• Interruptor de restabliment

4. Informació de seguretat

Keep the entire kit away from children under 3 years old.

This product is designed for DC12V petrol cars. It is not compatible with vehicles that have a factory OEM push start button, pneumatic lock systems, or require a double unlock pulse signal. Installation on luxury cars such as BMW or Mercedes-Benz is not recommended. Professional installation by a qualified car alarm installer is required to ensure proper functionality and safety.

5. Guia d'instal·lació

Nota important: Professional installation by a certified car alarm installer is strongly recommended for this system. Incorrect installation can lead to vehicle damage or system malfunction.

If your vehicle has a chip immobilizer in its factory OEM key fob, an extra bypass module (e.g., ASIN: B07NSLPBG7 or B00MEHBVIC) is required. This system is not compatible with CAN BUS or DATA style bypass modules. You may also need to unlock or remove the steering wheel lock in your vehicle during installation.

5.1 PKE Antenna Placement

Proper placement of the PKE antennas is crucial for the passive keyless entry function. The system typically includes a front PKE antenna and a rear antenna.

Imatge: Illustrates the PKE (Passive Keyless Entry) functionality, showing how the car automatically unlocks when the key fob is within 3-6 feet and locks when it is 6-9 feet away.

6. Instruccions de funcionament

6.1 Key Fob Functions

Imatge: Detallada view of the key fob, indicating the LED indicator, Arm/Lock button, Start button/Panic mode button, and Disarm/Trunk release button.

• Arm/Lock Button: Press to arm the alarm system and lock the vehicle doors.
• Start Button/Panic Mode: Press to activate remote engine start (if configured) or hold for panic alarm.
• Disarm/Trunk Release Button: Press to disarm the alarm system and unlock the vehicle doors. Hold to activate remote trunk release.

6.2 Starting and Stopping the Engine (Push Button)

Imatge: Visual guide for starting and stopping the car using the push-button, illustrating two methods for starting and one for stopping.

1. Method 1 (Quick Start): In disarmed status, step on the foot brake pedal and short press the push start button once to start the car.
2. Method 2 (Long Press Start): In disarmed status, keep pressing the start button for 3 seconds while stepping on the foot brake pedal to start the car.
3. Apagar: Once the car is started, step on the foot brake pedal and short press the push start button once to shut off the engine.

6.3 Arrencada del motor a distància

To remotely start your engine, ensure the vehicle is armed and locked. Press the designated remote start button on your key fob (often the "Start button/panic mode" button, refer to your specific key fob diagram). The engine will start, allowing you to pre-condition the cabin. To stop the remote engine, press the same button again or disarm the vehicle.

Imatge: Depicts a car in different weather conditions (cold winter, hot summer) with a key fob, illustrating the convenience of remote engine start for pre-warming or pre-cooling the vehicle.

6.4 Remote Trunk Release

To open the trunk remotely, press and hold the Disarm/Trunk Release button on your key fob. An extra trunk release solenoid kit may be required for this function to work on some vehicles.

Imatge: Shows a hand holding a key fob, remotely opening the trunk of an SUV, highlighting the remote trunk release feature.

6.5 Shock Alarm Warning

The system is equipped with a shock sensor that triggers an alarm warning if it detects significant impact or vibration to the vehicle. This feature helps deter theft and vandalism.

Imatge: Illustrates the shock alarm warning feature, showing a car in a parking garage with red lightning bolts indicating a triggered alarm, and a hand holding the key fob.

7. Manteniment

7.1 Key Fob Battery Replacement

The key fobs are powered by CR2032 batteries. If the range or responsiveness of your key fob decreases, it may be time to replace the battery.

Imatge: Step-by-step guide on how to replace the CR2032 battery in the key fob. It shows pressing a button to separate the key fob head, prying open the shell with a flat screwdriver, and replacing the battery.

1. Press the button on the side of the key fob and pull to separate the key fob head and body.
2. Once apart, use a small flat screwdriver to carefully detach the key fob shell. Handle with care to avoid breaking the shell.
3. Traieu la bateria CR2032 antiga.
4. Substituïu-la per una nova CR2032, assegurant la polaritat correcta.
5. Torneu a muntar el comandament a distància.

8. Solució De Problemes

• El sistema no respon: Check key fob battery. Ensure the key fob is within range for PKE functions.
• Engine Not Starting via Push Button: Ensure the system is disarmed and the foot brake pedal is pressed firmly. Verify all wiring connections are secure.
• Remote Start Issues: Confirm the vehicle is in a safe state for remote start (e.g., doors closed, armed). Check if a bypass module is correctly installed and functioning if your car has a chip immobilizer.
• Shock Sensor Not Working: Verify the shock sensor is properly connected and adjusted. Sensitivity may need to be configured by a professional installer.
• PKE Range Issues: Ensure PKE antennas are correctly installed and not obstructed. Replace key fob battery if range is consistently poor.
• Avaries generals: If experiencing persistent issues, it is highly recommended to consult with a professional car alarm installer.

9. Especificacions

10. Garantia i Suport

For any issues with installation or product functionality, please contact EASYGUARD customer support. It is recommended to seek assistance from a professional car alarm installer for complex problems.

You can find more information and support on the official EASYGUARD weblloc: ieasyguard.com