Steinel L 840 SC LED Outdoor Wall Light Instruction Manual

1. Introducció

The Steinel L 840 SC is an advanced LED outdoor wall light designed for modern exterior illumination. It features an integrated 160° high-frequency motion detector and smart control capabilities via the Steinel Connect app. This light provides warm white illumination and offers various customizable settings for enhanced security and convenience around your home, pathways, garden, and patio.

2. Instruccions de seguretat

• Seguretat elèctrica: La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb les normatives nacionals de cablejat i els codis elèctrics locals.
• Desconnexió d'alimentació: Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or repair work.
• Ús exterior: This product is designed exclusively for outdoor use. Ensure proper sealing and weather protection during installation.
• Superfície de muntatge: Mount the light on a stable, flat surface that can support its weight.
• Vol. Operatiutage: Assegureu-vos que la font d'alimentació voltage coincideix amb el volum especificat del productetage (220-240 V).
• Non-Replaceable LED: The LED light source is integrated and cannot be replaced. Do not attempt to open the LED module.

3. Contingut del paquet

Si us plau, comproveu que tots els components siguin presents i no estiguin danyats:

• Làmpada de paret exterior LED Steinel L 840 SC
• Mounting material (3 screws, 3 wall plugs, 3 spacers)
• Manual d'usuari

4. Configuració i instal·lació

The Steinel L 840 SC is designed for wall mounting. Ensure the chosen location provides optimal coverage for the motion sensor and is within reach of the electrical supply.

4.1 Consideracions sobre la ubicació del muntatge

• Alçada: For optimal motion detection, mount the light at a height of approximately 1.8 to 2.5 meters.
• Rang del sensor: The 160° high-frequency sensor has a range of up to 5 meters. Consider the desired detection area when positioning.
• Obstruccions: Avoid mounting near large metal objects, dense foliage, or other sources of interference that might affect sensor performance.

4.2 Passos d'instal·lació

1. Desconnecteu l'alimentació: Turn off the main power supply to the installation area at the circuit breaker. Verify that the power is off using a voltage provador.
2. Preparació de la superfície de muntatge: Mark the drilling points on the wall using the light fixture as a template. Drill holes and insert the provided wall plugs.
3. Cablejat: Connect the electrical wires (Live, Neutral) from your household wiring to the corresponding terminals on the light fixture. Ensure secure connections.
4. Muntar l'aparell: Secure the light fixture to the wall using the provided screws and spacers. Ensure it is firmly attached.
5. Restaura l'alimentació: Once installation is complete and all connections are secure, restore power at the circuit breaker. The light will perform an initial self-test.

Figure 1: Steinel L 840 SC LED Outdoor Wall Light. This image shows the anthracite-colored wall light, highlighting its compact and modern design.

Figure 2: The L 840 SC light installed on an exterior wall, providing illumination to a patio area at night. This demonstrates its aesthetic integration and functional lighting.

5. Instruccions de funcionament

The Steinel L 840 SC is primarily controlled and configured via the Steinel Connect app.

5.1 Steinel Connect App

The free Steinel Connect app allows you to customize various settings of your L 840 SC light.

1. Descarrega l'aplicació: Download the "Steinel Connect" app from the Google Play Store (for Android devices) or the Apple App Store (for iOS devices).
2. Maridatge: Follow the in-app instructions to pair your L 840 SC light via Bluetooth. Ensure Bluetooth is enabled on your smartphone.
3. Configuració: Once paired, you can access and adjust the following settings:

• Configuració del sensor de moviment: Adjust the detection range (up to 5m) and sensitivity in 3 directions to fine-tune motion detection. The sensor is designed to ignore small animals and swaying branches.
• Durada de la llum: Set how long the main light stays on after motion is detected.
• Crepuscle: Define the ambient light level at which the sensor becomes active.
• Night Light (Basic Light): Enable a continuous low-level illumination (10% to 50% brightness) during darkness for constant ambient lighting.
• Llum contínua: Activate a 4-hour continuous full brightness mode for extended illumination when needed.
• Llum principal regulable: Adjust the brightness of the main light output from 50% to 100%.
• Light Groups (Bluetooth Mesh): Connect multiple Steinel Connect lights to create groups and control them simultaneously for synchronized lighting scenarios.

Figure 3: Screenshot of the Steinel Connect app interface, demonstrating the various settings available for controlling the light fixture.

Figure 4: Diagram illustrating how multiple Steinel Connect lights can form a Bluetooth Mesh network for synchronized control.

5.2 Funcionament del sensor de moviment

The L 840 SC features an invisible 160° high-frequency sensor that reliably detects human movement.

• Principi de detecció: The sensor emits high-frequency electromagnetic waves and detects changes in the echo caused by movement within its detection zone.
• Detecció intel·ligent: It is optimized to differentiate between human movement and smaller disturbances like pets or wind-blown foliage, reducing false triggers.
• Interval ajustable: The detection range can be precisely adjusted via the app to suit the specific requirements of your installation area.

Figure 5: Visual representation of the high-frequency sensor's detection pattern, showing how it emits waves to detect movement.

Figure 6: Diagram illustrating the typical motion detection range of the sensor in an outdoor environment, showing its coverage area.

6. Manteniment

The Steinel L 840 SC is designed for low maintenance. The integrated LED system has a long lifespan of approximately 50,000 hours, meaning bulb replacement is not required.

• Neteja: Per netejar l'aparell, netegeu-lo amb un drap suau iamp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar la superfície.
• Inspecció: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

7. Solució De Problemes

Si teniu problemes amb el vostre Steinel L 840 SC, consulteu els passos de resolució de problemes habituals següents:

8. Especificacions

9. Garantia i Suport

Steinel products are manufactured to high-quality standards and undergo rigorous testing. For specific warranty information, please refer to the warranty card included with your product or visit the official Steinel weblloc.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Steinel customer support through their official weblloc web o la informació de contacte que es proporciona a l'embalatge del producte.

Figure 7: The Steinel Tap Duo C wireless switch, an optional accessory that can be used to control Steinel Connect lights.