JJC SR-F2 Wired Remote Control User Manual

1. Introducció

The JJC SR-F2 Wired Remote Control is designed to provide convenient remote operation for select Sony cameras and camcorders. This remote commander helps eliminate camera shake and offers various control functions for both video and still photography, including power control, zooming, focusing, shooting, and grid line display.

2. Contingut del paquet

• JJC SR-F2 Wired Remote Control
• Multi-Terminal Cable
• Remote Terminal Cable
• Clip desmuntable
• Manual d'instruccions

Image: The package contents of the JJC SR-F2 remote control, showing the remote, two connection cables, and a detachable clip.

3. Producte acabatview

The SR-F2 remote features an ergonomic design with clearly labeled buttons for intuitive control.

Image: A detailed diagram illustrating the buttons and their corresponding functions on the JJC SR-F2 remote control.

• Botó de disparador: Two-step button for focusing (half-press) and shooting (full-press). Includes a lock for bulb shooting and continuous shooting.
• Botó d'encesa: Turns the connected camera or camcorder on/off.
• Grid Line Button: Cycles through grid line display options on the camera/camcorder screen.
• Botons de zoom (W/T): Controls the zoom function (Wide/Telephoto). Features two-step zooming for smooth transitions.
• Botó d'inici / aturada: Inicia i atura la gravació de vídeo.
• Clip desmuntable: Allows the remote to be attached to a tripod handle or other devices.
• 1/4"-20 Female Thread: Located on the back for mounting to tripods or other accessories.

4. Configuració

1. Connecteu el cable: Select the appropriate cable (Multi-Terminal or Remote Terminal) for your Sony camera or camcorder. Connect one end to the remote control and the other end to the corresponding port on your device.
2. Muntar el comandament a distància (opcional): If desired, attach the detachable clip to the remote. You can then clip the remote to a tripod handle, selfie stick, or use the 1/4"-20 thread on the back to mount it directly to a tripod or other accessory. The clip can rotate 360 degrees for optimal positioning.

Image: The JJC SR-F2 remote control connected to a Sony camera mounted on a tripod, demonstrating a typical setup.

Image: The JJC SR-F2 remote control connected to a Sony camcorder, showing the cable connection and the remote clipped to the tripod handle.

5. Instruccions de funcionament

5.1 Control de potència

• Premeu el botó PODER button to turn the connected camera or camcorder on or off.
• If the camera is in standby mode, pressing the PODER button will reactivate it.

5.2 Still Image Shooting

• Focus: Half-press the shutter release button to focus.
• Disparar: Fully press the shutter release button to take a photo.
• Bulb Lock: For long exposure shots, set your camera to Bulb mode. Half-press the shutter button, then slide the shutter release button down to lock it for continuous exposure.
• Continuous Shooting Lock: For continuous shooting, half-press the shutter button, then slide the shutter release button down to lock it.

5.3 Enregistrament de vídeo

• Premeu el botó INICI/PARA button to begin video recording. The indicator light on the remote will typically turn red.
• Premeu el botó INICI/PARA button again to end video recording. The indicator light will return to green (if powered on).

5.4 Funció de zoom

• Premeu el botó W button to zoom out (Wide).
• Premeu el botó T button to zoom in (Telephoto).
• The zoom buttons support two-step operation: a light press for slow, smooth zooming and a full press for faster zooming. This allows for precise control over zoom speed.

5.5 Grid Line Display

• Premeu el botó LÍNIA DE GRID button to toggle and cycle through various grid line display options on your camera or camcorder's screen.

5.6 Vídeos instructius

6. Compatibilitat

The JJC SR-F2 remote control is compatible with a wide range of Sony cameras and camcorders featuring a Multi Terminal or Remote Terminal. Below is a list of compatible models:

• Sony Camcorders: PXW-X70, PXW-Z90V, HXR-NX80, AX30, AX33, AX40, AX43, AX53, AX55, AX100, AX100E, AX700, AXP33, AXP35, AXP55, CX220, CX230, CX240, CX280, CX290, CX320, CX330, CX380, CX390, CX400E, CX405, CX410VE, CX420, CX430V, CX440, CX450, CX455, CX470, CX480, CX485, CX510E, CX530E, CX535, CX610E, CX620, CX625, CX630V, CX670, CX675, CX680, CX900, PJ320E, PJ330E, PJ340, PJ350, PJ380, PJ390, PJ410, PJ420E, PJ420VE, PJ430, PJ430E, PJ430V, PJ440, PJ510E, PJ530E, PJ540, PJ540E, PJ610E, PJ620, PJ630V, PJ650E, PJ660, PJ660E, PJ670, PJ675, PJ680, PJ780E, PJ780VE, PJ790, PJ790E, PJ790V, PJ800, PJ810, PJ820.
• Sony Cameras: RX1RII, RX10, RX10II, RX10III, RX10IV, RX100II, RX100III, RX100IV, RX100V, RX100VI, RX100VII, ZV-1, A7RV, A9III, A1II, HX50, HX50V, HX60, HX60V, HX80, HX90V, HX300, HX350, HX400, HX400V, QX30, WX500, A5000, A5100, A6000, A6100, A6300, A6400.

Note: When used with mirrorless interchangeable lens cameras (e.g., A5000, A6000 series), the zooming function of this remote control will only work with power zoom lenses, such as the Sony E PZ 16-50mm f/3.5-5.6 OSS Kit Lens.

7. Solució De Problemes

• El comandament a distància no respon: Ensure the cable is securely connected to both the remote and the camera/camcorder. Check if the camera/camcorder is powered on.
• Zoom function not working: Verify that your lens is a power zoom lens if using a mirrorless camera. Some prime lenses or manual zoom lenses do not support electronic zoom control.
• Camera not turning on/off: Confirm the camera's power settings and ensure it is not in a mode that overrides external power control.
• Connexió intermitent: Inspect the cables for any damage or bends. Try using a different cable if available.

8. Especificacions

9. Garantia i assistència

JJC products are designed for reliability and performance. For warranty information and technical support, please refer to the documentation included with your purchase or visit the official JJC weblloc: www.jjc.cc