GOOLOO X7 4250A Jump Starter with Air Compressor Instruction Manual

1. Introducció

Thank you for choosing the GOOLOO X7 4250A Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting power for vehicles, inflate tires, and serve as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat per evitar lesions o danys al dispositiu i al vehicle:

• No submergiu el dispositiu en aigua ni l'exposeu a la pluja.
• Do not operate the device if it is damaged or has been dropped.
• Mantenir fora de l'abast dels nens.
• Assegureu-vos una ventilació adequada durant l'ús i la càrrega.
• Eviteu curtcircuitar el cl d'arrencador de bateriaamps.
• The device features 10 built-in protection functions, including over-current, short-circuit, reverse polarity, low/high temperature, over-voltage, and over-charge protection. However, always follow instructions carefully.
• Do not attempt to jump start a vehicle with a severely damaged or frozen battery.
• Operate within the specified temperature range (-20°C to 60°C).

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x GOOLOO X7 Jump Starter with Air Compressor
• 1 x cable de pont intel·ligent
• 1 x cable USB-A a USB-C
• 1 x bossa de transport
• 1 x mànega d'aire
• 3 x broquets d'aire
• 1 x Manual d'usuari

Image: GOOLOO X7 Jump Starter with all included accessories, including jumper cables, air hose, and various nozzles.

4. Producte acabatview

Familiarize yourself with the main components of your GOOLOO X7 device:

1. Unitat principal: Contains the battery, control panel, and ports.
2. Pantalla digital: Shows battery level, tire pressure, and operating modes.
3. Port d'arrencada ràpida: Per connectar els cables de pont intel·ligents.
4. Port del compressor d'aire: Per connectar la mànega d'aire.
5. Ports de sortida USB: Per carregar dispositius externs.
6. Port d'entrada USB-C: For charging the GOOLOO X7 itself.
7. Llanterna LED: Llum integrada amb múltiples modes.

Image: Close-up of the GOOLOO X7's digital display, showing battery indicator and pressure units.

5. Configuració

Before first use, ensure the GOOLOO X7 is fully charged.

1. Càrrec inicial: Connect the provided USB-A to USB-C cable to the device's USB-C input port and a suitable USB wall adapter (not included). Charge until the battery indicator on the digital display shows full.
2. Comproveu el nivell de la bateria: Press the power button once to check the current battery level on the digital display. It is recommended to have at least 50% charge before jump-starting a vehicle.

Image: Close-up of the Type-C charging port on the GOOLOO X7 device.

6. Instruccions de funcionament

6.1. Arrencada d'un vehicle amb ajuda d'un cable

The X7 can jump start all 12V vehicles (up to 10L gasoline and 10L diesel engines) up to 70 times on a single charge.

1. Ensure the GOOLOO X7 has sufficient charge.
2. Connect the smart jumper cable to the jump start port on the X7.
3. Enganxeu el cl vermellamp (+) to the positive terminal of the vehicle battery.
4. Enganxeu el cl negreamp (-) to the negative terminal of the vehicle battery.
5. Once connected correctly, the smart cable indicator light will turn green. If it's red, check connections.
6. Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again.
7. Once the vehicle starts, disconnect the clamps from the car battery first, then disconnect the smart cable from the X7.
8. For completely discharged batteries (below 2V), use the Boost function by pressing and holding the Boost button on the smart cable for 3 seconds until the indicator turns green.

Image: The GOOLOO X7 device with smart jumper cables attached, ready for use.

6.2. Ús del compressor d'aire

The X7 features a 160 PSI digital tire inflator, capable of inflating a typical car tire to 20 PSI in approximately 2 minutes.

1. Connect the air hose to the air compressor port on the X7.
2. Attach the other end of the air hose to the tire valve. Use appropriate nozzles for different inflatables (e.g., balls, bicycle tires).
3. Turn on the X7. The digital display will show the current tire pressure.
4. Use the '+' and '-' buttons to set the desired pressure. The device supports PSI, BAR, and KPA units.
5. Premeu el botó d'inici per començar la inflació. El compressor s'aturarà automàticament un cop s'assoleixi la pressió preestablerta.
6. Disconnect the air hose from the tire and the X7.

Image: The GOOLOO X7 device with the air hose and various inflation nozzles.

6.3. Ús com a bateria externa

The X7 can charge your electronic devices with its 18W fast charging capability.

1. Connect your device's charging cable to one of the USB output ports on the X7.
2. The X7 will automatically begin charging your device.

Image: The GOOLOO X7 device connected via USB to charge a mobile phone.

6.4. Ús de la llanterna LED

The X7 includes a 400-lumen LED flashlight with four modes.

1. Press and hold the flashlight button to turn on the continuous white light.
2. Press the button again to cycle through modes: continuous red light, flashing light, SOS signal.
3. Premeu i manteniu premut el botó de nou per apagar la llanterna.

Image: The GOOLOO X7 device with its integrated LED flashlight illuminated.

7. Charging the GOOLOO X7

To recharge your GOOLOO X7:

1. Connect the provided USB-A to USB-C cable to the X7's USB-C input port.
2. Connect the other end of the cable to a USB wall adapter (5V/3A recommended) or a car charger.
3. The digital display will show the charging progress. Charge until the battery indicator is full.

8. Manteniment

Proper maintenance ensures the longevity and performance of your GOOLOO X7.

• Neteja: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasives.
• Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Càrrega: Recharge the device every 3-6 months if not in regular use to maintain battery health.
• Dissipació de calor: The unique honeycomb design aids in heat dissipation, preventing overheating during use and extending product lifespan. Ensure vents are not blocked.

9. Solució De Problemes

If you encounter issues with your GOOLOO X7, refer to the following common problems and solutions:

• El dispositiu no s'encén: Ensure the device is charged. If completely discharged, charge for at least 30 minutes before attempting to power on.
• Vehicle not jump starting:
  • Check that the smart jumper cable is securely connected to both the X7 and the vehicle battery terminals.
  • Ensure correct polarity (red to positive, black to negative).
  • If the vehicle battery is extremely low (below 2V), use the Boost function on the smart cable.
  • The vehicle's battery may be beyond jump-starting. Consult a mechanic.
• El compressor d'aire no s'infla:
  • Ensure the air hose is securely connected to both the X7 and the tire valve.
  • Check that the desired pressure is set and the compressor is turned on.
  • Verify the X7 has sufficient battery charge.
• External devices not charging: Ensure the X7 has sufficient charge and the USB cable is properly connected.

If problems persist, please contact GOOLOO customer support.

10. Especificacions

11. Garantia i Suport

GOOLOO es compromet a oferir productes d'alta qualitat i un excel·lent servei al client.

• Garantia: The GOOLOO X7 comes with an 18-month warranty from the date of purchase.
• Política de devolució: Gaudeix d'una garantia de devolució incondicional de 30 dies.
• Atenció al client: GOOLOO offers 24/7 customer support.
• Suport tècnic: Lifetime customer and technical support are provided.

For any inquiries, technical assistance, or warranty claims, please contact GOOLOO customer service through the retailer's platform or the official GOOLOO weblloc.

Image: A customer support representative wearing a headset, symbolizing GOOLOO's commitment to customer service.