TC Electronic JUNE-60 CHORUS Pedal Instruction Manual

1. Introducció

The TC Electronic JUNE-60 CHORUS pedal is an authentic recreation of the legendary synthesizer chorus from the 1980s. This pedal features a simple 2-button interface for intuitive modulation tone and utilizes all-analog BBD (Bucket Brigade Delay) circuitry to deliver its classic sound. Designed for guitarists seeking vintage chorus effects, the JUNE-60 CHORUS also includes True Bypass for ultimate signal integrity.

TC Electronic JUNE-60 CHORUS Pedal, top-down view

Figura 1.1: De dalt a baix view of the TC Electronic JUNE-60 CHORUS Pedal, showcasing its two yellow buttons and True Bypass footswitch.

2. Instruccions de seguretat importants

Llegiu atentament aquestes instruccions abans de fer funcionar el dispositiu.
Conserveu aquestes instruccions per a referència futura.
Heed all warnings on the product and in the instructions.
No utilitzeu aquest aparell a prop d'aigua o humitat.
Netegeu només amb un drap sec.
No bloquegeu cap obertura de ventilació. Instal·leu-ho d'acord amb les instruccions del fabricant.
No instal·leu a prop de cap font de calor com ara radiadors, registres de calor, estufes o altres aparells (inclosos amplificadors) que produeixen calor.
Utilitzeu només accessoris/accessoris especificats pel fabricant.
Demaneu tot el servei a personal de servei qualificat. El manteniment és necessari quan l'aparell s'ha fet malbé d'alguna manera, com ara el cable d'alimentació o l'endoll està danyat, s'ha vessat líquid o han caigut objectes a l'aparell, l'aparell ha estat exposat a la pluja o la humitat, no funciona amb normalitat. , o s'ha deixat caure.

3. Configuració

3.1 Connexió d'alimentació

The JUNE-60 CHORUS pedal can be powered by a 9V battery or an external 9V DC power supply (not included). Ensure the power supply provides at least 100 mA. Connect the power supply to the 9V DC input jack on the rear of the pedal.

Potència de la bateria: To install a 9V battery, open the battery compartment on the bottom of the pedal. Connect the battery to the clip and place it inside the compartment.
Potència externa: Use a regulated 9V DC power supply with a center-negative plug, providing a minimum of 100 mA.

TC Electronic JUNE-60 CHORUS Pedal rear panel with input, output, and power jacks

Figure 3.1: Rear panel of the JUNE-60 CHORUS Pedal, showing the INPUT (MONO), 9V DC power input (100 mA), and OUTPUT (MONO/STEREO) jacks.

3.2 Connexions d'àudio

Connecta el teu instrument (per exemple, la guitarra) a INPUT (MONO) jack using a standard 1/4-inch instrument cable. Connect the SORTIDA (MONO/ESTÈREO) jack al teu amplifier or the next pedal in your signal chain. For stereo operation, use a Y-cable or two separate cables from the output to two amplifiers or a stereo input device.

Configuració monofònica: Connect a single 1/4-inch cable from the OUTPUT jack to your ampmés viu.
Configuració estèreo: The JUNE-60 CHORUS supports stereo output. Consult your amplifier or audio interface manual for proper stereo input connections.

4. Funcionament

The JUNE-60 CHORUS pedal features a straightforward 2-button interface, replicating the classic chorus modes of its inspiration. The pedal is activated by the True Bypass footswitch.

4.1 Activació de l'efecte

Premeu el botó VERITAT BYPASS footswitch to toggle the effect on or off. When the effect is active, the LED indicator will illuminate.

4.2 Chorus Modes (Buttons I & II)

The two yellow buttons, labeled I i II, select different chorus modes. These buttons can be used individually or simultaneously to achieve distinct modulation characteristics.

Botó I: Engages Chorus Mode I, offering a specific modulation rate and depth.
Botó II: Engages Chorus Mode II, offering an alternative modulation rate and depth.
Buttons I & II (Simultaneously): Pressing both buttons together activates a combined chorus mode, often resulting in a richer, more complex modulation. Experiment with these combinations to find your desired sound.

TC Electronic JUNE-60 CHORUS Pedal top view showing buttons I and II

Figura 4.1: superior view of the JUNE-60 CHORUS Pedal, highlighting the two yellow buttons (I and II) for chorus mode selection.

4.3 Mono/Stereo Switch

A small switch labeled MONO / ESTÉREO is located near the chorus mode buttons. This switch determines the output configuration of the pedal.

MONO: Per solter ampconfiguracions de lifier.
ESTÉREO: For dual amplifier or stereo input setups, providing a wider, more immersive chorus effect.

5. Manteniment

5.1 Neteja

Clean the pedal's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.

5.2 Substitució de la bateria

If using battery power, replace the 9V battery when the effect LED dims or the pedal's performance degrades. To replace, open the battery compartment on the bottom of the unit, disconnect the old battery, and connect a new one, ensuring correct polarity.

5.3 Emmagatzematge

When not in use for extended periods, disconnect the power supply and remove the battery to prevent leakage. Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures.

6. Solució De Problemes

Problema	Causa possible	Solució
No fa so quan s'acciona el pedal.	No power, incorrect cable connection, faulty cable.	Check power supply connection and ensure it meets 9V DC, 100mA specifications. Replace battery if using battery power. Verifiqueu que tots els cables d'àudio estiguin connectats correctament. Test cables with another device to ensure they are not faulty.
So feble o distorsionat.	Low battery, incorrect input level from instrument.	Replace battery or use external power supply. Ensure instrument output level is appropriate for pedal input.
Chorus effect is not noticeable.	Incorrect chorus mode selected, subtle setting.	Experiment with pressing Button I, Button II, or both simultaneously. Ensure the MONO/STEREO switch is set correctly for your setup.
Pedal does not power on with adapter.	Insufficient current from power adapter.	Verify your power adapter provides at least 100 mA at 9V DC. Some adapters may provide 9V but insufficient current.

7. Especificacions

Característica	Detall
Model	JUNE-60 CHORUS
de tipus d'efectes	Cor
Circuits	All-analog BBD (Bucket Brigade Delay)
Bypass	true Bypass
Controls	2 x Chorus Mode Buttons (I, II), MONO/STEREO Switch, True Bypass Footswitch
Connector d'entrada	1 x 1/4" TS, unbalanced (Mono)
Connector de sortida	1 x 1/4" TS, unbalanced (Mono/Stereo)
Entrada de potència	Standard 9V DC, center-negative, >100 mA (Power supply not included)
Opció de bateria	Bateria de 9 V (no inclosa)
Dimensions (A x A x P)	Aproximadament 13.7 x 8.6 x 5.6 polzades
Pes	8 unces (0.5 lliures)
Material del cos	Plàstic, metall

TC Electronic JUNE-60 CHORUS Pedal bottom label with regulatory information

Figure 7.1: Bottom label of the JUNE-60 CHORUS Pedal, displaying model and regulatory compliance information.

8. Garantia i Suport

8.1 Informació de la garantia

TC Electronic products are designed and manufactured to the highest standards. For detailed warranty terms and conditions, please refer to the official TC Electronic weblloc web o la targeta de garantia inclosa amb el producte. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

8.2 Atenció al client

Should you encounter any issues or have questions regarding your JUNE-60 CHORUS pedal, please visit the official TC Electronic support page for FAQs, troubleshooting guides, and contact information. You can find support resources at the Suport electrònic de TC Weblloc.