Introducció
The Victrola Journey portable suitcase record player offers a classic design combined with modern features, allowing you to enjoy your music anywhere. This 3-speed belt-driven turntable includes built-in Bluetooth speakers for seamless smartphone audio playback. It features upgraded sound quality with reduced bass vibration and a custom-tuned Pre-Amp for improved audio clarity and bass levels, suitable for both home and on-the-go use.
- Three Speed Belt-Driven Turntable: Plays 33 1/3, 45, and 78 rpm records with upgraded premium sound quality and sound isolating feet.
- Disseny portàtil: Housed in a vintage suitcase with an easy carry handle for flexible music listening.
- Opcions de connexió ampliades: Stream smartphone audio via built-in Bluetooth speakers, connect external speakers via stereo RCA outputs, use the Line input for non-Bluetooth devices, or connect headphones.
- Configuració sense esforç: No stereo system or extra equipment required; ready to use in minutes.
- Controls fàcils d'utilitzar: Features an Input select knob, Power/Volume Knob, and an Auto stop switch.
Configuració
Desembalatge i col·locació inicial
Carefully remove the record player from its packaging. Place the unit on a flat, stable surface. Open the lid of the suitcase record player.
Image: The Victrola Journey Record Player in Light Grey Linen, with its lid open, revealing the turntable, tonearm, and control panel. The unit is ready for initial setup.
Connexió d'alimentació
Connect the provided power adapter to the DC IN jack on the back of the unit and then plug it into a wall outlet. Ensure the power switch is in the OFF position before connecting.
Stylus Guard Removal
Before playing a record, gently remove the clear plastic stylus guard from the stylus (needle) at the end of the tonearm. Be careful not to bend the stylus.
En funcionament
Reproducció d'un disc de vinil
- Col·loqueu un disc de vinil al plat del tocadiscos.
- Select the appropriate speed (33 1/3, 45, or 78 RPM) using the speed selector switch located on the turntable deck. For 45 RPM records, place the included 45 RPM adapter on the center spindle.
- Turn the Power/Volume knob clockwise to turn on the unit and adjust to a low volume.
- Lift the tonearm from its rest using the cue lever.
- Move the tonearm over the desired starting track of the record.
- Baixeu suaument el braç sobre el disc amb la palanca de cue. El disc començarà a reproduir-se.
- At the end of the record, the auto-stop function (if enabled) will stop the platter. Lift the tonearm and return it to its rest.
Imatge: Un primer pla view of the Victrola Journey turntable with a vinyl record spinning. The tonearm with its stylus is positioned on the record, illustrating the playback process.
Transmissió Bluetooth
Per reproduir àudio en temps real des d'un dispositiu amb Bluetooth:
- Turn the Input Select knob to the 'BT' position. The Bluetooth indicator light will flash.
- Enable Bluetooth on your external device (e.g., smartphone, tablet) and search for 'Victrola Journey'.
- Select 'Victrola Journey' to pair. Once paired, the indicator light will stop flashing and remain solid.
- Ara pots reproduir música des del teu dispositiu a través dels altaveus del tocadiscos.
Video: An official Victrola video demonstrating the Bluetooth pairing process and features of the Journey turntable.
External Audio Connections
The Victrola Journey offers several options for connecting to other audio equipment:
- Sortida RCA: Use the RCA L/R output jacks on the back of the unit to connect to an external amplifier o altaveus alimentats.
- Entrada de línia: Connect non-Bluetooth audio devices (e.g., CD player, MP3 player) to the LINE IN jack using a 3.5mm audio cable. Select 'LINE IN' using the Input Select knob.
- Auriculars Jack: For private listening, plug standard 3.5mm headphones into the HEADPHONE jack on the front panel.
Image: The rear panel of the Victrola Journey Record Player, highlighting the RCA output jacks and the power input for connecting to external audio systems or power sources.
Manteniment
Registres de neteja
Regularly clean your vinyl records with a soft, anti-static brush or cloth to remove dust and debris. Always wipe in the direction of the grooves, not across them.
Cura del llapis
The stylus (needle) is a delicate component. Clean it periodically with a soft brush, brushing from back to front. Avoid touching the stylus with your fingers. Replace the stylus if you notice a decrease in sound quality or visible damage.
Neteja d'armaris
Wipe the exterior of the record player with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
Resolució de problemes
If you encounter issues with your Victrola Journey Record Player, please refer to the following common solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense poder | Power adapter not connected or outlet not active. | Ensure power adapter is securely connected to the unit and a working wall outlet. Check if the power switch is ON. |
| No hi ha so dels altaveus | Volume too low, input mode incorrect, or headphones connected. | Increase volume. Ensure correct input mode (PHONO, BT, LINE IN) is selected. Disconnect headphones if connected. |
| Saltar registres | Record is dirty or scratched, or unit is not on a stable surface. | Clean the record. Place the unit on a stable, level surface away from vibrations. Check stylus for damage. |
| Bluetooth no emparellat | Unit not in BT mode, or device too far. | Ensure Input Select knob is set to 'BT'. Keep your Bluetooth device within 33 feet (10 meters) of the record player. Try restarting both devices. |
| La plataforma giratòria no gira | Auto-stop engaged, or belt issue. | Check the auto-stop switch. If the issue persists, consult the full troubleshooting guide. |
Per a una resolució de problemes més detallada, consulteu el servei oficial Guia de resolució de problemes (PDF).
Especificacions
Key technical specifications for the Victrola Journey Bluetooth Suitcase Record Player:
- Marca: Victrola
- Nom del model: Victrola Vintage 3 Speed Bluetooth Suitcase Record Player
- Número de model: VSC-550BT-LGY
- Color: Light Grey Linen
- Material: Plàstic
- Pes de l'article: 5.5 lliures
- Dimensions de l'article (L x A x A): 13.9" x 10.1" x 5"
- Velocitat de rotació màxima: 78 rpm (supports 33 1/3, 45, 78 rpm)
- Tecnologia de connectivitat: Amb cable, sense fil (Bluetooth)
- Font d'alimentació: Battery Powered (DC Motor, 120 watts)
- Components inclosos: Placa giratòria
- UPC: 816203019226
Image: A diagram illustrating the dimensions of the Victrola Journey Record Player, showing its length, width, and height measurements.
Informació de la garantia
The Victrola Journey Bluetooth Suitcase Record Player comes with a 1 anys de garantia from the manufacturer. For specific details regarding coverage and claims, please refer to the warranty documentation included with your product or contact Victrola customer support.
Additionally, products purchased from Amazon typically include a 30-day return/replacement policy. Please check your purchase details for the most accurate return information.
Atenció al client
For further assistance, technical support, or warranty inquiries, please contact Victrola customer service. You can typically find contact information on the manufacturer's weblloc web o a la documentació que s'inclou amb el producte.
Visita l'oficial Botiga Victrola a Amazon per a més informació i actualitzacions del producte.