1. Introducció
This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Bixolon SPP-R310 Direct Thermal Printer. This portable monochrome printer is designed for efficient label and receipt printing, featuring WLAN connectivity for flexible use.
Please read this manual thoroughly before using the printer to ensure proper functionality and to prevent damage.
Figure 1: Bixolon SPP-R310 Direct Thermal Printer. This image shows the compact, black and gray printer from an angled perspective, highlighting the Bixolon logo, power and feed buttons, and indicator lights for error, battery, and status.
2. Configuració
2.1 Desembalatge
Carefully remove all components from the packaging. Verify that all items listed in the packing list are present. Retain the packaging for future transport or storage.
2.2 Càrrega de paper
- Obriu la coberta del paper prement el pestell d'alliberament.
- Insert the thermal paper roll into the compartment, ensuring the paper feeds from the bottom of the roll towards the print head.
- Pull a small amount of paper out past the print head.
- Tanqueu la coberta de paper fermament fins que encaixi al seu lloc.
2.3 Connexió de potència
Connect the provided AC adapter to the printer's power input port and then plug the adapter into a standard electrical outlet. Ensure the battery is fully charged before initial use for optimal performance.
2.4 Instal·lació del controlador
Before connecting the printer to your computer or mobile device, install the necessary drivers. Drivers can typically be downloaded from the official Bixolon weblloc. Seguiu les instruccions que apareixen a la pantalla i que us proporciona l'instal·lador.
3. Funcionament de la impressora
3.1 Engegada/apagada
To power on the printer, press and hold the PODER button until the indicator lights illuminate. To power off, press and hold the PODER button again until the lights turn off.
3.2 Llums indicadors
- ERROR: Indicates a printer error (e.g., paper out, cover open). Refer to the troubleshooting section.
- BATT: Shows battery charge level. Multiple lights indicate higher charge.
- ESTAT: Indicates printer status (e.g., ready, printing).
3.3 Botó d'alimentació
Premeu el botó ALIMENTACIÓ button to advance the paper by one line. Holding the button will continuously feed paper.
3.4 Printing via WLAN
The SPP-R310 supports WLAN connectivity. Ensure your device is connected to the same wireless network as the printer. Refer to the printer's network configuration guide (usually available on the Bixolon website) for detailed instructions on setting up WLAN.
Once configured, you can send print jobs from compatible applications on your computer or mobile device.
4. Manteniment
4.1 Neteja del capçal d'impressió
To maintain print quality, clean the thermal print head regularly. Use a cotton swab lightly dampened with isopropyl alcohol. Gently wipe the print head surface. Allow it to dry completely before closing the cover and resuming operation.
4.2 Cura de la bateria
- Carregueu la bateria completament abans del primer ús.
- Eviteu descarregar completament la bateria amb freqüència.
- Si guardeu la impressora durant un període prolongat, carregueu la bateria al 50% aproximadament i guardeu-la en un lloc fresc i sec.
4.3 Neteja general
Netegeu l'exterior de la impressora amb un drap suau i secamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
5. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La impressora no s'encén | Low battery or power adapter issue | Charge the battery or check power adapter connection. |
| Sense sortida d'impressió | Paper out, paper loaded incorrectly, or communication error | Load paper correctly, check paper cover, verify WLAN connection and driver installation. |
| Poca qualitat d'impressió | Dirty print head or incorrect paper type | Clean the print head (refer to Section 4.1). Ensure you are using thermal paper. |
| El llum ERROR està encès | Paper out, cover open, or other internal error | Check paper supply, ensure paper cover is closed, power cycle the printer. |
6. Especificacions
- Model: Bixolon SPP-R310
- Mètode d'impressió: Tèrmica directa
- Connectivitat: WLAN
- Dimensions (paquet): 8 x 8 x 8 polzades
- Pes (article): 1 lliures
- Fabricant: Bixolon
- ASIN: B07NJS379C
- Primer disponible: 26 de juny de 2018
7. Garantia i Suport
Specific warranty details for the Bixolon SPP-R310 printer are not provided in this manual. For comprehensive warranty information, technical support, and service inquiries, please visit the official Bixolon weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
Sovint podeu trobar recursos d'assistència, preguntes freqüents i informació de contacte a la pàgina oficial del fabricant. weblloc: www.bixolon.com