1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your EMANER Model 7042-WH Dual-Head LED Security Light. Please read this manual thoroughly before installation and retain it for future reference.
Davant view of the EMANER Dual-Head LED Security Light, highlighting its two rotatable light heads and motion sensor. A 120V warning label is visible.
2. Informació de seguretat
ADVERTIMENT: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes.
- Ensure the power supply is 120V AC.
- No instal·leu a prop de materials combustibles.
- This product is designed for outdoor use and is IP65 waterproof rated.
- Consulteu un electricista qualificat si no esteu segur del procés d'instal·lació.
- No mireu directament a la font de llum LED quan estigui il·luminada.
3. Producte acabatview i Components
The EMANER Model 7042-WH is a dual-head LED security light featuring a rotatable design and multiple intelligent control modes. Key components include:
- Rotatable Light Heads: Two adjustable LED light panels.
- Sensor de moviment PIR: Sensor d'infrarojos passius per a la detecció de moviment.
- Dials de control: For adjusting time delay and sensitivity.
- Maquinari de muntatge: Includes mounting strap, screws, and wire nuts.
A diagram providing precise measurements of the security light's length, width, height, and the dimensions of the rotatable light heads and PIR motion sensor.
4. Especificacions
| Característica | Especificació |
|---|---|
| Marca | EMANER |
| Número de model | 7042-WH |
| Color | White Fixture |
| Material | ABS Plastic + Aluminum internal |
| Tipus de font de llum | LED |
| Wattage | 28 watts |
| Brillantor | 2800 lúmens |
| Temperatura de color | 5000K blanc llum diürna |
| Voltage | 120 Volts |
| Nivell de resistència a l'aigua | Impermeable IP65 |
| Angle de detecció | 180 graus |
| Distància de detecció | 20-70 feet (adjustable) |
| Tipus de muntatge | Wall mount, Eave/Soffit mount |
| Dimensions del producte | 9 cm de llargada x 7.4 cm d'amplada x 6.4 cm d'alçada |
| Pes de l'article | 1.74 lliures |
5. Configuració i instal·lació
This LED security light is designed for easy installation. Follow these steps carefully:
5.1 Preinstal·lació
- Apagueu l'alimentació: Disconnect power at the circuit breaker or fuse box before beginning installation.
- Select mounting location: Choose a wall or eave/soffit location that provides the desired coverage and is within reach of existing wiring. Recommended mounting height is 6.5-12 feet.
- Desempaquetar el contingut: Ensure all components are present: light fixture, mounting strap, screws, and wire nuts.
5.2 Cablejat i muntatge
- Attach the mounting strap to your existing electrical outlet box using the provided screws.
- Connecteu els cables elèctrics:
- Connecteu el negre Cable (actiu) des del dispositiu fins al negre Cable (actiu) de la caixa de corrent.
- Connecteu el blanc Cable (neutre) des del dispositiu fins al blanc Cable (neutre) de la caixa de corrent.
- Connecteu el green/bare copper Cable (de terra) des del dispositiu fins al green/bare copper Cable (de terra) de la caixa de corrent.
- Carefully tuck the wires into the outlet box.
- Align the light fixture with the mounting strap and secure it with the decorative cover and fixture mounting screw.
- Adjust the light heads and motion sensor to your desired angles.
Diagram for installing the security light, detailing wire connections, mounting strap, back plate, and attaching the light head and sensor.
Illustrations showing two common installation methods: mounting the light under an eave or soffit, and mounting it directly onto a wall.
6. Modes de funcionament i configuració
The security light features a control panel with dials for TIME and SENSITIVITY, and a slide switch for selecting operating modes. All modes operate only at night or in dark environments, automatically turning off at dawn.
An infographic explaining the various operating modes: TEST, AUTO, Motion Sensor, 6 Hours, and Dusk to Dawn (PC) modes, along with their respective time delay and sensitivity settings.
6.1 Tauler de control acabatview
Detallada view of the control panel, showing the 'TIME' dial (5S, 3MIN, TEST) and 'SENSITIVITY' dial (+/-) for adjusting light duration and motion detection range.
- Marcador de temps: Adjusts how long the light stays on after motion is detected (5 seconds to 3 minutes). The 'TEST' setting is for initial setup.
- SENSITIVITY Dial: Adjusts the motion sensor's detection range (Low to High sensitivity, 20-70 feet).
- Mode Slide Switch: Selects between AUTO, OFF (Motion Sensor), 6H (6 Hours), and PC (Dusk to Dawn Stay On) modes.
An illustration demonstrating the motion sensor's 120-degree sensing angle and adjustable detection distance of 20-39 feet (6-12 meters) from a mounting height of 6.5-12 feet.
6.2 Modes de funcionament
- Mode de PROVA: (Slide switch to 'TEST' on TIME dial) This mode is for testing after installation. When connected to AC power, the light will turn on for 5 seconds based on the time delay setting.
- AUTO Dim Light Mode: (Slide switch to 'AUTO') The security light turns on with dim light at dusk. When motion is detected, it switches to 100% brightness. After no motion is detected for the set time delay (5 seconds to 3 minutes), it returns to dim light. Automatically turns off at dawn.
- Motion On/Off Mode: (Slide switch to 'OFF') The security flood light only turns on at 100% brightness when motion is activated. It automatically turns off when no motion is detected for the set time delay. Automatically turns off at dawn.
- 6 Hours Mode: (Slide switch to '6H') The flood light turns on at 100% brightness and stays on for 6 hours. After 6 hours, it automatically switches to 'AUTO Dim Light Mode'. Automatically turns off at dawn.
- Dusk to Dawn Stay On Mode (PC Mode): (Slide switch to 'PC') The motion security light turns on with bright light (100% brightness) and stays on all night. It automatically turns off in the daytime.
7. Manteniment
Regular maintenance ensures optimal performance and longevity of your EMANER LED Security Light.
- Neteja: Netegeu periòdicament els capçals de les llums i la lent del sensor de moviment amb un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Inspecció: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections.
- No hi ha peces reparables per l'usuari: The LED light source is non-removable and not user-serviceable. Do not attempt to open the light heads.
8. Solució De Problemes
Si teniu problemes amb el llum de seguretat, consulteu els problemes i solucions més comuns següents:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén a la nit. | 1. L'alimentació està apagada. 2. Photocell sensor is detecting ambient light. 3. Problema de cablejat. | 1. Comproveu el disjuntor/fusible. 2. Ensure the sensor is not obstructed or exposed to other light sources. 3. Verify all wiring connections are secure. |
| La llum es manté encesa contínuament. | 1. Mode set to 'PC' (Dusk to Dawn Stay On). 2. Constant motion detected. 3. Wiring error. | 1. Change mode to 'AUTO' or 'OFF'. 2. Adjust sensor sensitivity or angle to avoid constant triggers. 3. Torneu a comprovar el cablejat. |
| Light flashes or cycles on/off rapidly. | 1. Intermittent power supply. 2. Sensor interference. 3. Faulty unit. | 1. Check power connections. 2. Ensure no objects are moving within the sensor's range. 3. Contacteu amb l'assistència al client si els problemes persisteixen. |
| El sensor de moviment no detecta. | 1. Sensibilitat establerta massa baixa. 2. Sensor obstructed or misaligned. 3. Temperature too high (reduces PIR effectiveness). | 1. Increase SENSITIVITY setting. 2. Clear obstructions and adjust sensor angle. 3. This is normal behavior in very hot weather. |
9. Informació de la garantia
The EMANER Model 7042-WH LED Security Light comes with a Garantia del fabricant de 2 anysAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
10. Atenció al client
For technical assistance, warranty claims, or any questions regarding your EMANER product, please contact EMANER customer service. You can typically find contact information on the product packaging or through the retailer where the product was purchased.
Alternatively, you may visit the official EMANER brand store online or use the 'Ask a question' feature on the product's retail page.