Black Box UWL-12KLD WALLMOUNT Charging Locker

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Black Box UWL-12KLD Wallmount Charging Locker. This unit is designed to securely store and charge up to 12 electronic devices, featuring a keyed locking drawer for enhanced security. Please read this manual thoroughly before using the product to ensure proper function and safety.

Figura 1: Frontal view of the Black Box UWL-12KLD Wallmount Charging Locker. The locker is light gray with a black handle and a keyed lock on the main door. A perforated metal section is visible on the front for ventilation, and a lower drawer is present for additional storage or access.

Informació de seguretat

Adhere to the following safety guidelines to prevent injury or damage to the unit:

• Ensure the locker is securely mounted to a stable wall structure capable of supporting its weight and the weight of all devices.
• Do not overload the locker beyond its specified capacity.
• Keep the locker away from water, excessive humidity, and direct heat sources.
• Only use the provided power cords and adapters, or certified replacements.
• Do not attempt to open or service the internal components. Refer all servicing to qualified personnel.
• Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.

Contingut del paquet

Verifiqueu que hi hagi tots els elements abans de continuar amb la instal·lació:

• Black Box UWL-12KLD Wallmount Charging Locker Unit
• Maquinari de muntatge (cargols, ancoratges)
• Keys for the main door and drawer lock (typically 2 sets)
• Cable d'alimentació
• Manual d'usuari (aquest document)

Configuració i instal·lació

1. Selecció de l'emplaçament

Choose a location with a sturdy wall capable of supporting the locker's weight (approximately 35.25 lbs empty, plus devices). Ensure access to a standard power outlet and adequate ventilation space around the unit.

2. Mounting the Locker

1. Carefully unpack the locker and inspect for any shipping damage.
2. Using the locker as a template, mark the desired mounting points on the wall. Ensure the marks are level.
3. Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material (e.g., wood studs, drywall with anchors, concrete).
4. Inseriu ancoratges de paret si cal.
5. Align the locker with the drilled holes and secure it to the wall using the provided mounting hardware. Tighten all screws firmly but do not overtighten.
6. Verify the locker is securely attached and stable before proceeding.

3. Connexió d'alimentació

1. Connect the provided power cord to the power inlet on the locker.
2. Connecteu l'altre extrem del cable d'alimentació a una presa de corrent amb connexió a terra.
3. Confirm that the power indicator light (if present) illuminates, indicating power is supplied to the unit.

Instruccions de funcionament

1. Accessing Charging Bays

• Insert the key into the main door lock and turn to unlock.
• Open the main door to reveal the 12 individual charging bays.

2. Dispositius de càrrega

1. Place one electronic device into each charging bay.
2. Connect the device's charging cable to the internal power outlet within the bay.
3. Ensure devices are properly seated and cables are not pinched when closing the door.

3. Securing the Locker

• Close the main door firmly.
• Turn the key to the locked position and remove it.
• To secure the lower drawer, insert the key into its lock and turn to secure.

Manteniment

Regular maintenance ensures the longevity and optimal performance of your charging locker.

• Neteja: Use a soft, dry cloth to wipe down the exterior surfaces. For stubborn marks, a slightly damp cloth with mild detergent can be used, followed by drying. Do not use abrasive cleaners or solvents.
• Ventilació: Periodically check that the ventilation openings are clear of dust and debris to ensure proper airflow and prevent overheating.
• Gestió de cables: Ensure internal cables are neatly arranged and not tangled or damaged. Replace any frayed or damaged cables immediately.
• Mecanisme de bloqueig: Keep the lock mechanisms clean. If the lock becomes stiff, a small amount of graphite lubricant can be applied.

Resolució de problemes

If the problem persists after attempting these solutions, contact Black Box customer support for assistance.

Especificacions

Garantia i Suport

For warranty information, technical support, or to purchase replacement parts, please contact Black Box Corporation directly. Refer to the official Black Box weblloc web o l'embalatge del producte per obtenir les dades de contacte i els termes de garantia més actualitzats.

Corporació Black Box
www.blackbox.com